[Tue May 29 03:54:29 2012] Detection parameters:
  Position = (234.4, 327.1) = 5 34 56.52 22 1 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.0 +/- 20.1
  Background counts = 212.3
  Rate = 0.03 +/- 0.006

[Tue May 29 03:54:29 2012] Off-axis axis estimate = 5.08'
[Tue May 29 06:59:58 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Tue May 29 06:59:58 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Tue May 29 06:59:58 2012] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.686
[Tue May 29 06:59:58 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 8.97"
[Tue May 29 10:22:43 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src49.ximg exists
[Tue May 29 10:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src49.csv
[Tue May 29 10:22:43 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src49_1.ximg exists
[Tue May 29 10:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src49.csv
[Tue May 29 10:22:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:22:45 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Tue May 29 10:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src49.csv
[Tue May 29 10:22:45 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Tue May 29 10:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src49.csv
[Tue May 29 10:22:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:23:17 2012] Warning, spatial fit 49 centroid is now closest to src. 61
[Tue May 29 10:23:17 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:17 2012] Assessing source extent using major
[Tue May 29 10:23:17 2012] Source does appear to be extended
[Tue May 29 10:23:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 15:21:58 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Tue May 29 15:21:58 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Tue May 29 15:21:58 2012] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.686
[Tue May 29 15:21:58 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 8.97"
[Tue May 29 19:57:59 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src43.ximg exists
[Tue May 29 19:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src43.csv
[Tue May 29 19:57:59 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src43_1.ximg exists
[Tue May 29 19:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src43.csv
[Tue May 29 19:57:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:01 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Tue May 29 19:58:01 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Tue May 29 19:58:01 2012] Fit fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Tue May 29 19:58:30 2012] Spatial fit model total counts = 2739.050000, observed total counts = 1837.000000
[Tue May 29 19:58:30 2012] Poor agreement between spatial fit and data for source 65
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 29 19:58:30 2012] Spatial fit model total counts = 1835.480000, observed total counts = 1742.000000
[Tue May 29 19:58:30 2012] Offset between fit and detection position for source 65 = 2.526801 pixels
[Tue May 29 19:58:30 2012] 1599.873000 total counts/ 366.523000 bgd. counts: snr = 64.422225
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 2.526801 pixels
  Position = (233.1, 329.2) = 5 34 56.93 22 1 46.1
  Extent = 17.9 (17.9-35.9)", rotation angle = 0
  Source counts = 1233.3 +/- 40.0
  Background counts = 366.5
  Rate = 0.2 +/- 0.006
[Tue May 29 19:58:30 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:30 2012] Assessing source extent using major axis lower bound
[Tue May 29 19:58:30 2012] Source does appear to be extended
[Tue May 29 19:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 19:58:30 2012] Source is confused with source 1
[Tue May 29 21:21:03 2012] Counts = 1233.350000, rescaling region sizes by 2.000000
[Tue May 29 21:21:03 2012] XMMSAS src. selection expression = ellipse(20233.965200, 28593.566600, 2152.764062, 2152.764062, 0.000000, X, Y)
[Tue May 29 21:21:03 2012] Writing source region out to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src65_src.reg
[Tue May 29 21:21:03 2012] Extracting stamp from image fullrun_mos2_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (109, 205) - (357, 453)
[Tue May 29 21:21:03 2012] XMMSAS bgd. selection expression = annulus(20233.965200, 28593.566600, 7175.880206, 14351.760413, X, Y) && !ellipse(28133.110000, 34697.680000, 1673.640048, 1673.640048, 0.000000, X, Y) && !ellipse(27170.788000, 34694.964000, 1061.272031, 1061.272031, 0.000000, X, Y) && !ellipse(27737.924164, 34967.791962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.070000, 36107.872000, 1240.896036, 1240.896036, 0.000000, X, Y) && !ellipse(29552.711029, 34306.102905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26158.622467, 34387.861877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28095.055400, 35024.792000, 974.992028, 974.992028, 0.000000, X, Y) && !ellipse(28312.891998, 40494.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26788.283905, 18949.863480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20301.062317, 29260.445404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26782.501251, 19798.871490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27408.444000, 19323.141400, 865.160025, 865.160025, 0.000000, X, Y) && !ellipse(34202.039032, 28481.534149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34186.000000, 30856.306519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.497240, 39048.885200, 1001.984029, 1001.984029, 0.000000, X, Y) && !ellipse(28083.293030, 37542.737610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27482.940460, 20274.359360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30422.907501, 19770.863586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30167.522888, 34247.997589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28365.805600, 42477.353200, 631.656018, 631.656018, 0.000000, X, Y) && !ellipse(28070.359400, 36245.039200, 754.870422, 754.870422, 0.000000, X, Y) && !ellipse(27352.768000, 36458.490000, 670.779219, 670.779219, 0.000000, X, Y) && !ellipse(25095.208893, 34448.046082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23921.486816, 35277.453339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34752.153137, 27275.086182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34111.797241, 27005.738770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33841.491364, 25002.375793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27458.976166, 35070.302643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24407.312042, 34460.251251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34082.610000, 29126.026000, 1030.136030, 1030.136030, 0.000000, X, Y) && !ellipse(28154.044250, 41021.030426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27891.432648, 36852.124664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28384.673370, 42060.469086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34294.633179, 30389.775391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27197.378760, 36424.209200, 950.064027, 950.064027, 0.000000, X, Y) && !ellipse(27730.228000, 19133.012000, 1476.296042, 1476.296042, 0.000000, X, Y) && !ellipse(28069.449707, 38577.843262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26508.629669, 18152.009918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28461.041400, 43332.874600, 775.384822, 775.384822, 0.000000, X, Y) && !ellipse(20435.088196, 29693.302795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34444.894562, 25533.623260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33772.898682, 23967.479889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28938.841705, 20190.384766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20608.871811, 27688.848602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.039014, 40498.778675, 2025.952058, 912.357373, 88.172747, X, Y) && !ellipse(25143.795929, 20430.602524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34220.069336, 31532.677887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34607.669098, 29416.407135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19778.552551, 26067.812500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34870.947113, 30225.267120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34793.263611, 28140.166412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.094482, 20397.058884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34721.652161, 26218.721710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33664.000000, 23076.096283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27637.396790, 39268.413727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.145081, 20227.280380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27702.373322, 42401.130585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34876.469574, 30925.626678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26870.260590, 18335.135254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20566.002380, 30251.156311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27810.273712, 41261.868134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29187.592800, 35030.693000, 1671.640048, 529.403215, 359.805000, X, Y) && !ellipse(28038.184082, 20143.220825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29394.248260, 20226.645828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27137.414948, 16612.254883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25033.886000, 19688.854000, 1432.848041, 1106.584032, 353.799200, X, Y) && !ellipse(27620.048828, 42918.229401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35040.138855, 28842.198639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27045.404000, 38490.244000, 1845.232053, 1845.232053, 0.000000, X, Y) && !ellipse(20535.801422, 31713.371216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25541.572418, 34428.003265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22805.461182, 20583.996841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31836.734497, 34127.804413, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 21:21:03 2012] Writing fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src65.gif
[Tue May 29 21:33:50 2012] Mean detx,y = (7682.42, 710.91) 
[Tue May 29 21:33:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 21:36:54 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 21:36:55 2012] Setting source spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Tue May 29 21:36:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Tue May 29 22:58:58 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:58 2012] Error reading totcts from fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Tue May 29 22:58:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:59 2012] Using photon index=1.80, rate=0.194, arf fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src65.arf
[Tue May 29 22:58:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:59 2012] Updating source flux to 3.6e-12
[Tue May 29 23:02:02 2012] Flag p found in src. 65 procflags, skipping spectral fitting
[Tue May 29 23:02:02 2012] Flag c found in src. 65 procflags, skipping spectral fitting