[Tue May 29 03:54:28 2012] Detection parameters:
  Position = (401.4, 348.0) = 5 34 4.29 22 3 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.0 +/- 18.9
  Background counts = 140.1
  Rate = 0.03 +/- 0.005

[Tue May 29 03:54:29 2012] Off-axis axis estimate = 8.28'
[Tue May 29 06:59:58 2012] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Tue May 29 06:59:58 2012] Initial guess for spatial extent in simple fitting = 10.57"
[Tue May 29 06:59:58 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.048
[Tue May 29 06:59:58 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 10.57"
[Tue May 29 10:22:43 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src54.ximg exists
[Tue May 29 10:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src54.csv
[Tue May 29 10:22:43 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src54_1.ximg exists
[Tue May 29 10:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src54.csv
[Tue May 29 10:22:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:22:45 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Tue May 29 10:22:45 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Tue May 29 10:22:45 2012] Fit fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Tue May 29 10:23:17 2012] Source 58 is offset by -4.796102 and 0.805277 pixels which is larger than
2 X fitted extent = 1.521131 x 1.521131, not incorporating fit results
[Tue May 29 10:23:17 2012] Source 58 is offset by -2.374401 and 3.036059 pixels which is larger than
2 X fitted extent = 1.419595 x 1.419595, not incorporating fit results
[Tue May 29 10:23:17 2012] Warning, spatial fit 54 centroid is now closest to src. 55
[Tue May 29 10:23:17 2012] Source 58 is offset by -6.517803 and -1.555320 pixels which is larger than
2 X fitted extent = 1.245062 x 1.245062, not incorporating fit results
[Tue May 29 10:23:17 2012] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 12.439013 pixels away
[Tue May 29 10:23:17 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:17 2012] Assessing source extent using major
[Tue May 29 10:23:17 2012] Source does appear to be extended
[Tue May 29 10:23:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:17 2012] Source is confused with source 57
[Tue May 29 15:21:58 2012] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Tue May 29 15:21:58 2012] Initial guess for spatial extent in simple fitting = 10.57"
[Tue May 29 15:21:58 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.048
[Tue May 29 15:21:58 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 10.57"
[Tue May 29 19:58:00 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src47.ximg exists
[Tue May 29 19:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src47.csv
[Tue May 29 19:58:00 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src47_1.ximg exists
[Tue May 29 19:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src47.csv
[Tue May 29 19:58:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:01 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Tue May 29 19:58:01 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Tue May 29 19:58:01 2012] Fit fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Tue May 29 19:58:30 2012] Warning, spatial fit 47 centroid is now closest to src. 55
[Tue May 29 19:58:30 2012] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 12.439013 pixels away
[Tue May 29 19:58:30 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:30 2012] Assessing source extent using major
[Tue May 29 19:58:30 2012] Source does appear to be extended
[Tue May 29 19:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 21:21:03 2012] XMMSAS src. selection expression = ellipse(34870.947113, 30225.267120, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 21:21:03 2012] Writing source region out to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src58_src.reg
[Tue May 29 21:21:03 2012] Extracting stamp from image fullrun_mos2_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (364, 310) - (439, 385)
[Tue May 29 21:21:03 2012] XMMSAS bgd. selection expression = annulus(34870.947113, 30225.267120, 1087.500000, 2175.000000, X, Y) && !ellipse(34202.039032, 28481.534149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34186.000000, 30856.306519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34752.153137, 27275.086182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34082.610000, 29126.026000, 1030.136030, 1030.136030, 0.000000, X, Y) && !ellipse(34294.633179, 30389.775391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34220.069336, 31532.677887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34607.669098, 29416.407135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34793.263611, 28140.166412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34876.469574, 30925.626678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35040.138855, 28842.198639, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 21:21:03 2012] Writing fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src58.gif
[Tue May 29 21:37:46 2012] Mean detx,y = (-7466.44, 3178.75) 
[Tue May 29 21:37:47 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 21:37:54 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 21:37:54 2012] Setting source spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Tue May 29 21:37:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Tue May 29 22:44:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 29 22:44:53 2012] rmf not generated due to insufficient counts
[Tue May 29 22:58:58 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:58 2012] Error reading totcts from fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Tue May 29 22:58:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:59 2012] Using photon index=1.80, rate=0.0298, arf fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src58.arf
[Tue May 29 22:58:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:59 2012] Updating source flux to 5.3e-13
[Tue May 29 23:02:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting