[Tue May 29 03:54:28 2012] Detection parameters:
  Position = (332.4, 395.3) = 5 34 25.88 22 6 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.4 +/- 21.7
  Background counts = 174.6
  Rate = 0.06 +/- 0.006

[Tue May 29 03:54:29 2012] Off-axis axis estimate = 7.44'
[Tue May 29 06:59:58 2012] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Tue May 29 06:59:58 2012] Initial guess for spatial extent in simple fitting = 10.15"
[Tue May 29 06:59:58 2012] source mask rpix=2.3, npix_max = 32, mask sum = 26, frac = 0.810
[Tue May 29 06:59:58 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 10.15"
[Tue May 29 10:22:42 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src12.ximg exists
[Tue May 29 10:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src12.csv
[Tue May 29 10:22:42 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue May 29 10:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src12.csv
[Tue May 29 10:22:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:22:44 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue May 29 10:22:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue May 29 10:22:44 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue May 29 10:22:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue May 29 10:22:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:23:17 2012] Spatial fit model total counts = 2921.490000, observed total counts = 2991.000000
[Tue May 29 10:23:17 2012] Offset between fit and detection position for source 50 = 1.626661 pixels
[Tue May 29 10:23:17 2012] Warning, changing simple spatial fit ID from 12 to 6
[Tue May 29 10:23:17 2012] 2812.240000 total counts/ 2812.240000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 1.626661 pixels
  Position = (333.6, 396.4) = 5 34 25.50 22 6 38.6
  Extent = 2.6 (2.6-39.0)", rotation angle = 0
  Source counts = 0.0 +/- 53.0
  Background counts = 2812.2
  Rate = 5e-16 +/- 0.008
  Deleting source due to low Poisson probability