[Tue May 29 03:54:28 2012] Detection parameters:
  Position = (322.1, 396.1) = 5 34 29.08 22 6 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 613.0 +/- 31.1
  Background counts = 183.9
  Rate = 0.2 +/- 0.008

[Tue May 29 03:54:29 2012] Off-axis axis estimate = 7.28'
[Tue May 29 06:59:58 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Tue May 29 06:59:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 29 06:59:58 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Tue May 29 06:59:58 2012] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.631
[Tue May 29 06:59:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.07"
[Tue May 29 10:22:42 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 29 10:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src1.csv
[Tue May 29 10:22:42 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 29 10:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src1.csv
[Tue May 29 10:22:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:22:44 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 29 10:22:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 29 10:22:44 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 29 10:22:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 29 10:22:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:23:17 2012] Warning, spatial fit 1 centroid is now closest to src. 37
[Tue May 29 10:23:17 2012] Spatial fit model total counts = 2823.090000, observed total counts = 2862.000000
[Tue May 29 10:23:17 2012] Offset between fit and detection position for source 5 = 3.753199 pixels
[Tue May 29 10:23:17 2012] Warning, changing simple spatial fit ID from 1 to 11
[Tue May 29 10:23:17 2012] 2636.767000 total counts/ 2512.180000 bgd. counts: snr = 2.485692
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 3.753199 pixels
  Position = (323.9, 399.4) = 5 34 28.52 22 6 51.4
  Extent = 20.9 (20.9-41.8)", rotation angle = 0
  Source counts = 124.6 +/- 51.3
  Background counts = 2512.2
  Rate = 0.02 +/- 0.008
[Tue May 29 10:23:17 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:17 2012] Assessing source extent using major axis lower bound
[Tue May 29 10:23:17 2012] Source does appear to be extended
[Tue May 29 10:23:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:17 2012] Source is confused with source 8
[Tue May 29 10:23:17 2012] Source is confused with source 42
[Tue May 29 10:23:17 2012] Source is confused with source 36
[Tue May 29 10:23:17 2012] Source is confused with source 38
[Tue May 29 10:23:17 2012] Source is confused with source 37
[Tue May 29 10:23:17 2012] Source is confused with source 39
[Tue May 29 10:23:17 2012] Source is confused with source 40
[Tue May 29 15:21:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 15:21:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 29 15:21:58 2012] Initial guess for spatial extent in simple fitting = 20.92"
[Tue May 29 15:21:58 2012] source mask rpix=4.8, npix_max = 112, mask sum = 80, frac = 0.710
[Tue May 29 15:21:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 20.92"
[Tue May 29 19:57:58 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 29 19:57:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src1.csv
[Tue May 29 19:57:58 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 29 19:57:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src1.csv
[Tue May 29 19:57:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:00 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 29 19:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 29 19:58:00 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 29 19:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 29 19:58:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:30 2012] Warning, spatial fit 1 centroid is now closest to src. 33
[Tue May 29 19:58:30 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:30 2012] Assessing source extent using major axis lower bound
[Tue May 29 19:58:30 2012] Source does appear to be extended
[Tue May 29 19:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 21:21:01 2012] XMMSAS src. selection expression = ellipse(28133.110000, 34697.680000, 1255.230036, 1255.230036, 0.000000, X, Y)
[Tue May 29 21:21:01 2012] Writing source region out to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src5_src.reg
[Tue May 29 21:21:01 2012] Extracting stamp from image fullrun_mos2_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (252, 327) - (396, 472)
[Tue May 29 21:21:01 2012] XMMSAS bgd. selection expression = annulus(28133.110000, 34697.680000, 2092.050060, 4184.100120, X, Y) && !ellipse(27170.788000, 34694.964000, 1061.272031, 1061.272031, 0.000000, X, Y) && !ellipse(27737.924164, 34967.791962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.070000, 36107.872000, 1240.896036, 1240.896036, 0.000000, X, Y) && !ellipse(29552.711029, 34306.102905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26158.622467, 34387.861877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28095.055400, 35024.792000, 974.992028, 974.992028, 0.000000, X, Y) && !ellipse(28295.497240, 39048.885200, 1001.984029, 1001.984029, 0.000000, X, Y) && !ellipse(28083.293030, 37542.737610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30167.522888, 34247.997589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28070.359400, 36245.039200, 754.870422, 754.870422, 0.000000, X, Y) && !ellipse(27352.768000, 36458.490000, 670.779219, 670.779219, 0.000000, X, Y) && !ellipse(25095.208893, 34448.046082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23921.486816, 35277.453339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27458.976166, 35070.302643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24407.312042, 34460.251251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27891.432648, 36852.124664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27197.378760, 36424.209200, 950.064027, 950.064027, 0.000000, X, Y) && !ellipse(28069.449707, 38577.843262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.039014, 40498.778675, 2025.952058, 912.357373, 88.172747, X, Y) && !ellipse(27637.396790, 39268.413727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29187.592800, 35030.693000, 1671.640048, 529.403215, 359.805000, X, Y) && !ellipse(27045.404000, 38490.244000, 1845.232053, 1845.232053, 0.000000, X, Y) && !ellipse(25541.572418, 34428.003265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31836.734497, 34127.804413, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 21:21:01 2012] Writing fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src5.gif
[Tue May 29 21:21:07 2012] Mean detx,y = (-461.60, 7440.57) 
[Tue May 29 21:21:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 21:21:32 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 21:21:33 2012] Setting source spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May 29 21:21:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue May 29 22:58:57 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:57 2012] Error reading totcts from fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May 29 22:58:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:58 2012] Using photon index=1.80, rate=0.0196, arf fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src5.arf
[Tue May 29 22:58:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:58 2012] Updating source flux to 4e-13
[Tue May 29 23:02:02 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Tue May 29 23:05:03 2012] Reading fit data from xmm0611181401/analysis//spectral/fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src5_pl.csv
[Tue May 29 23:05:03 2012] Spectral fit parameter nH value = 2.85436e+21
[Tue May 29 23:05:03 2012] Spectral fit parameter PhoIndex value = 2.30512
[Tue May 29 23:05:03 2012] Failed to get F(0.3-8.0) from xmm0611181401/analysis//spectral/fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Tue May 29 23:05:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 23:05:03 2012] Using Nh = 2.9e+21, photon index=2.31, rate=0.0196, arf fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src5.arf
[Tue May 29 23:05:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 23:05:03 2012] Updating source flux to 3.8e-13