[Tue May 29 03:54:28 2012] Detection parameters:
  Position = (294.1, 396.3) = 5 34 37.84 22 6 23.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.2 +/- 17.2
  Background counts = 168.8
  Rate = 0.02 +/- 0.003

[Tue May 29 03:54:29 2012] Off-axis axis estimate = 7.10'
[Tue May 29 06:59:58 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Tue May 29 06:59:58 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Tue May 29 06:59:58 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.961
[Tue May 29 06:59:58 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 9.98"
[Tue May 29 10:22:44 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src74.ximg exists
[Tue May 29 10:22:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src74.csv
[Tue May 29 10:22:44 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src74_1.ximg exists
[Tue May 29 10:22:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src74.csv
[Tue May 29 10:22:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:22:45 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Tue May 29 10:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src74.csv
[Tue May 29 10:22:45 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Tue May 29 10:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src74.csv
[Tue May 29 10:22:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:23:17 2012] Warning, spatial fit 74 centroid is now closest to src. 45
[Tue May 29 10:23:17 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:17 2012] Assessing source extent using major
[Tue May 29 10:23:17 2012] Source does appear to be extended
[Tue May 29 10:23:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:17 2012] Source is confused with source 45
[Tue May 29 15:21:58 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Tue May 29 15:21:58 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Tue May 29 15:21:58 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.961
[Tue May 29 15:21:58 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 9.98"
[Tue May 29 19:58:00 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src66.ximg exists
[Tue May 29 19:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src66.csv
[Tue May 29 19:58:00 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src66_1.ximg exists
[Tue May 29 19:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src66.csv
[Tue May 29 19:58:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:02 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Tue May 29 19:58:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src66.csv
[Tue May 29 19:58:02 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Tue May 29 19:58:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src66.csv
[Tue May 29 19:58:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:30 2012] Source 46 is offset by -2.493145 and -5.883848 pixels which is larger than
2 X fitted extent = 4.375025 x 4.375025, not incorporating fit results
[Tue May 29 19:58:30 2012] Warning, spatial fit 66 centroid is now closest to src. 45
[Tue May 29 19:58:30 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:30 2012] Assessing source extent using major
[Tue May 29 19:58:30 2012] Source does appear to be extended
[Tue May 29 19:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 21:21:03 2012] XMMSAS src. selection expression = ellipse(25541.572418, 34428.003265, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 21:21:03 2012] Writing source region out to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src46_src.reg
[Tue May 29 21:21:03 2012] Extracting stamp from image fullrun_mos2_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (257, 359) - (332, 434)
[Tue May 29 21:21:03 2012] XMMSAS bgd. selection expression = annulus(25541.572418, 34428.003265, 1087.500000, 2175.000000, X, Y) && !ellipse(28133.110000, 34697.680000, 1673.640048, 1673.640048, 0.000000, X, Y) && !ellipse(27170.788000, 34694.964000, 1061.272031, 1061.272031, 0.000000, X, Y) && !ellipse(27737.924164, 34967.791962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.070000, 36107.872000, 1240.896036, 1240.896036, 0.000000, X, Y) && !ellipse(26158.622467, 34387.861877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28095.055400, 35024.792000, 974.992028, 974.992028, 0.000000, X, Y) && !ellipse(28070.359400, 36245.039200, 754.870422, 754.870422, 0.000000, X, Y) && !ellipse(27352.768000, 36458.490000, 670.779219, 670.779219, 0.000000, X, Y) && !ellipse(25095.208893, 34448.046082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23921.486816, 35277.453339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27458.976166, 35070.302643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24407.312042, 34460.251251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27891.432648, 36852.124664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27197.378760, 36424.209200, 950.064027, 950.064027, 0.000000, X, Y) && !ellipse(29187.592800, 35030.693000, 1671.640048, 529.403215, 359.805000, X, Y)
[Tue May 29 21:21:03 2012] Writing fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src46.gif
[Tue May 29 21:43:11 2012] Mean detx,y = (2042.61, 6920.82) 
[Tue May 29 21:43:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 21:43:18 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 21:43:18 2012] Setting source spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Tue May 29 21:43:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Tue May 29 22:58:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 29 22:58:10 2012] rmf not generated due to insufficient counts
[Tue May 29 22:58:58 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:58 2012] Error reading totcts from fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Tue May 29 22:58:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:59 2012] Using photon index=1.80, rate=0.0164, arf fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src46.arf
[Tue May 29 22:58:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:59 2012] Updating source flux to 3.3e-13
[Tue May 29 23:02:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting