[Tue May 29 03:54:28 2012] Detection parameters:
  Position = (312.3, 416.0) = 5 34 32.16 22 8 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.4 +/- 23.6
  Background counts = 166.1
  Rate = 0.04 +/- 0.006

[Tue May 29 03:54:29 2012] Off-axis axis estimate = 8.58'
[Tue May 29 06:59:58 2012] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Tue May 29 06:59:58 2012] Initial guess for spatial extent in simple fitting = 10.72"
[Tue May 29 06:59:58 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Tue May 29 06:59:58 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 10.72"
[Tue May 29 10:22:43 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src36.ximg exists
[Tue May 29 10:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src36.csv
[Tue May 29 10:22:43 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src36_1.ximg exists
[Tue May 29 10:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src36.csv
[Tue May 29 10:22:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:22:45 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Tue May 29 10:22:45 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Tue May 29 10:22:45 2012] Fit fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Tue May 29 10:23:17 2012] Spatial fit model total counts = 2306.810000, observed total counts = 2355.000000
[Tue May 29 10:23:17 2012] Offset between fit and detection position for source 35 = 3.471584 pixels
[Tue May 29 10:23:17 2012] 2211.673000 total counts/ 1370.160000 bgd. counts: snr = 22.733965
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 3.471584 pixels
  Position = (312.9, 419.4) = 5 34 31.96 22 8 18.7
  Extent = 21.4 (21.3-21.4)", rotation angle = 0
  Source counts = 841.5 +/- 47.0
  Background counts = 1370.2
  Rate = 0.1 +/- 0.007
[Tue May 29 10:23:17 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:17 2012] Assessing source extent using major axis lower bound
[Tue May 29 10:23:17 2012] Source does appear to be extended
[Tue May 29 10:23:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:17 2012] Source is confused with source 33
[Tue May 29 15:21:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 15:21:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 29 15:21:58 2012] Initial guess for spatial extent in simple fitting = 21.40"
[Tue May 29 15:21:58 2012] source mask rpix=4.9, npix_max = 117, mask sum = 110, frac = 0.936
[Tue May 29 15:21:58 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 21.40"
[Tue May 29 19:57:59 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src32.ximg exists
[Tue May 29 19:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src32.csv
[Tue May 29 19:57:59 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue May 29 19:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src32.csv
[Tue May 29 19:57:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:01 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue May 29 19:58:01 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue May 29 19:58:01 2012] Fit fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Tue May 29 19:58:30 2012] Spatial fit model total counts = 2819.460000, observed total counts = 2862.000000
[Tue May 29 19:58:30 2012] Offset between fit and detection position for source 35 = 3.536526 pixels
[Tue May 29 19:58:30 2012] Warning, changing simple spatial fit ID from 32 to 10
[Tue May 29 19:58:30 2012] 2104.220000 total counts/ 973.720000 bgd. counts: snr = 36.228764
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 3.536526 pixels
  Position = (312.3, 416.0) = 5 34 32.17 22 8 3.5
  Extent = 20.9 (20.9-20.9)", rotation angle = 0
  Source counts = 1130.5 +/- 45.9
  Background counts = 973.7
  Rate = 0.2 +/- 0.007
[Tue May 29 19:58:30 2012] Spatial fit model total counts = 8201.250000, observed total counts = 8217.000000
[Tue May 29 19:58:30 2012] Offset between fit and detection position for source 35 = 3.381914 pixels
[Tue May 29 19:58:30 2012] Warning, changing simple spatial fit ID from 10 to 32
[Tue May 29 19:58:30 2012] 7865.528000 total counts/ 7670.680000 bgd. counts: snr = 2.224739
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 3.381914 pixels
  Position = (313.2, 419.2) = 5 34 31.89 22 8 17.7
  Extent = 11.9 (9.3-17.5)", rotation angle = 0
  Source counts = 194.8 +/- 88.7
  Background counts = 7670.7
  Rate = 0.03 +/- 0.01
[Tue May 29 19:58:30 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:30 2012] Assessing source extent using major axis lower bound
[Tue May 29 19:58:30 2012] Source does appear to be extended
[Tue May 29 19:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 21:21:02 2012] XMMSAS src. selection expression = ellipse(27197.378760, 36424.209200, 712.548021, 712.548021, 0.000000, X, Y)
[Tue May 29 21:21:02 2012] Writing source region out to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src35_src.reg
[Tue May 29 21:21:02 2012] Extracting stamp from image fullrun_mos2_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (272, 378) - (354, 460)
[Tue May 29 21:21:02 2012] XMMSAS bgd. selection expression = annulus(27197.378760, 36424.209200, 1187.580034, 2375.160068, X, Y) && !ellipse(28133.110000, 34697.680000, 1673.640048, 1673.640048, 0.000000, X, Y) && !ellipse(27170.788000, 34694.964000, 1061.272031, 1061.272031, 0.000000, X, Y) && !ellipse(27737.924164, 34967.791962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.070000, 36107.872000, 1240.896036, 1240.896036, 0.000000, X, Y) && !ellipse(29552.711029, 34306.102905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26158.622467, 34387.861877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28095.055400, 35024.792000, 974.992028, 974.992028, 0.000000, X, Y) && !ellipse(28295.497240, 39048.885200, 1001.984029, 1001.984029, 0.000000, X, Y) && !ellipse(28083.293030, 37542.737610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30167.522888, 34247.997589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28070.359400, 36245.039200, 754.870422, 754.870422, 0.000000, X, Y) && !ellipse(27352.768000, 36458.490000, 670.779219, 670.779219, 0.000000, X, Y) && !ellipse(25095.208893, 34448.046082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27458.976166, 35070.302643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24407.312042, 34460.251251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27891.432648, 36852.124664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28069.449707, 38577.843262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.039014, 40498.778675, 2025.952058, 912.357373, 88.172747, X, Y) && !ellipse(27637.396790, 39268.413727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29187.592800, 35030.693000, 1671.640048, 529.403215, 359.805000, X, Y) && !ellipse(27045.404000, 38490.244000, 1845.232053, 1845.232053, 0.000000, X, Y) && !ellipse(25541.572418, 34428.003265, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 21:21:02 2012] Writing fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src35.gif
[Tue May 29 21:29:49 2012] Mean detx,y = (484.53, 8905.55) 
[Tue May 29 21:29:50 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 21:30:00 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 21:30:00 2012] Setting source spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue May 29 21:30:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Tue May 29 22:58:58 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:58 2012] Error reading totcts from fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue May 29 22:58:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:58 2012] Using photon index=1.80, rate=0.0307, arf fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src35.arf
[Tue May 29 22:58:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:58 2012] Updating source flux to 6.7e-13
[Tue May 29 23:02:02 2012] Flag c found in src. 35 procflags, skipping spectral fitting