[Tue May 29 03:54:28 2012] Detection parameters:
  Position = (323.4, 432.1) = 5 34 28.70 22 9 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 341.4 +/- 29.0
  Background counts = 114.4
  Rate = 0.05 +/- 0.005

[Tue May 29 03:54:29 2012] Off-axis axis estimate = 9.86'
[Tue May 29 06:59:58 2012] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Tue May 29 06:59:58 2012] Initial guess for spatial extent in simple fitting = 11.36"
[Tue May 29 06:59:58 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.930
[Tue May 29 06:59:58 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 11.36"
[Tue May 29 10:22:42 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src17.ximg exists
[Tue May 29 10:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src17.csv
[Tue May 29 10:22:42 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue May 29 10:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src17.csv
[Tue May 29 10:22:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:22:44 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue May 29 10:22:44 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue May 29 10:22:44 2012] Fit fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue May 29 10:23:17 2012] Warning, spatial fit 17 centroid is now closest to src. 26
[Tue May 29 10:23:17 2012] Source 29 is offset by -4.250839 and 3.687973 pixels which is larger than
2 X fitted extent = 1.325600 x 1.325600, not incorporating fit results
[Tue May 29 10:23:17 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:17 2012] Assessing source extent using major
[Tue May 29 10:23:17 2012] Source does appear to be extended
[Tue May 29 10:23:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:17 2012] Source is confused with source 27
[Tue May 29 15:21:58 2012] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Tue May 29 15:21:58 2012] Initial guess for spatial extent in simple fitting = 11.36"
[Tue May 29 15:21:58 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.930
[Tue May 29 15:21:58 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 11.36"
[Tue May 29 19:57:59 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src13.ximg exists
[Tue May 29 19:57:59 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue May 29 19:57:59 2012] Fit fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src13 appears to have run properly
[Tue May 29 19:58:00 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue May 29 19:58:00 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue May 29 19:58:00 2012] Fit fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue May 29 19:58:30 2012] Warning, spatial fit 13 centroid is now closest to src. 25
[Tue May 29 19:58:30 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:30 2012] Assessing source extent using major
[Tue May 29 19:58:30 2012] Source does appear to be extended
[Tue May 29 19:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 21:21:02 2012] XMMSAS src. selection expression = ellipse(28083.293030, 37542.737610, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 21:21:02 2012] Writing source region out to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src29_src.reg
[Tue May 29 21:21:02 2012] Extracting stamp from image fullrun_mos2_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (286, 395) - (361, 470)
[Tue May 29 21:21:02 2012] XMMSAS bgd. selection expression = annulus(28083.293030, 37542.737610, 1087.500000, 2175.000000, X, Y) && !ellipse(28133.110000, 34697.680000, 1673.640048, 1673.640048, 0.000000, X, Y) && !ellipse(27170.788000, 34694.964000, 1061.272031, 1061.272031, 0.000000, X, Y) && !ellipse(27737.924164, 34967.791962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.070000, 36107.872000, 1240.896036, 1240.896036, 0.000000, X, Y) && !ellipse(28095.055400, 35024.792000, 974.992028, 974.992028, 0.000000, X, Y) && !ellipse(28312.891998, 40494.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.497240, 39048.885200, 1001.984029, 1001.984029, 0.000000, X, Y) && !ellipse(28070.359400, 36245.039200, 754.870422, 754.870422, 0.000000, X, Y) && !ellipse(27352.768000, 36458.490000, 670.779219, 670.779219, 0.000000, X, Y) && !ellipse(27458.976166, 35070.302643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27891.432648, 36852.124664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27197.378760, 36424.209200, 950.064027, 950.064027, 0.000000, X, Y) && !ellipse(28069.449707, 38577.843262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.039014, 40498.778675, 2025.952058, 912.357373, 88.172747, X, Y) && !ellipse(27637.396790, 39268.413727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29187.592800, 35030.693000, 1671.640048, 529.403215, 359.805000, X, Y) && !ellipse(27045.404000, 38490.244000, 1845.232053, 1845.232053, 0.000000, X, Y)
[Tue May 29 21:21:02 2012] Writing fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src29.gif
[Tue May 29 21:25:23 2012] Mean detx,y = (-304.38, 10093.46) 
[Tue May 29 21:25:24 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 21:25:34 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 21:25:34 2012] Setting source spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue May 29 21:25:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue May 29 22:07:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 29 22:07:30 2012] rmf not generated due to insufficient counts
[Tue May 29 22:58:58 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:58 2012] Error reading totcts from fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue May 29 22:58:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:58 2012] Using photon index=1.80, rate=0.0537, arf fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src29.arf
[Tue May 29 22:58:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:58 2012] Updating source flux to 1.3e-12
[Tue May 29 23:02:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting