[Tue May 29 03:53:56 2012] Detection parameters:
  Position = (233.9, 283.8) = 5 34 56.69 21 58 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.8 +/- 14.3
  Background counts = 167.1
  Rate = 0.01 +/- 0.002

[Tue May 29 03:53:56 2012] Off-axis axis estimate = 4.80'
[Tue May 29 03:55:48 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Tue May 29 03:55:48 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Tue May 29 03:55:48 2012] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.586
[Tue May 29 03:55:48 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 8.83"
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src63.ximg exists
[Tue May 29 06:59:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src63.csv
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src63_1.ximg exists
[Tue May 29 06:59:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src63.csv
[Tue May 29 06:59:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 06:59:58 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Tue May 29 06:59:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src63.csv
[Tue May 29 06:59:58 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Tue May 29 06:59:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src63.csv
[Tue May 29 06:59:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:23:01 2012] Source 65 is offset by 5.884229 and 7.909415 pixels which is larger than
2 X fitted extent = 5.789422 x 5.789422, not incorporating fit results
[Tue May 29 10:23:01 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:01 2012] Assessing source extent using major
[Tue May 29 10:23:01 2012] Source does appear to be extended
[Tue May 29 10:23:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:30 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Tue May 29 10:23:30 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Tue May 29 10:23:30 2012] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.586
[Tue May 29 10:23:30 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 8.83"
[Tue May 29 15:21:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src57.ximg exists
[Tue May 29 15:21:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src57.csv
[Tue May 29 15:21:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src57_1.ximg exists
[Tue May 29 15:21:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src57.csv
[Tue May 29 15:21:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 15:21:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Tue May 29 15:21:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src57.csv
[Tue May 29 15:21:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Tue May 29 15:21:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src57.csv
[Tue May 29 15:21:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:16 2012] Warning, spatial fit 57 centroid is now closest to src. 1
[Tue May 29 19:58:17 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:17 2012] Assessing source extent using major
[Tue May 29 19:58:17 2012] Source does appear to be extended
[Tue May 29 19:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 19:58:46 2012] XMMSAS src. selection expression = ellipse(20296.901886, 24641.459076, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 19:58:46 2012] Writing source region out to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src65_src.reg
[Tue May 29 19:58:46 2012] Extracting stamp from image fullrun_mos1_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (196, 246) - (271, 321)
[Tue May 29 19:58:46 2012] XMMSAS bgd. selection expression = annulus(20296.901886, 24641.459076, 1087.500000, 2175.000000, X, Y) && !ellipse(20606.938950, 25857.799683, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 19:58:46 2012] Writing fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src65.gif
[Tue May 29 20:20:35 2012] Mean detx,y = (-2977.10, -7166.94) 
[Tue May 29 20:20:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 20:20:49 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 20:20:49 2012] Setting source spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Tue May 29 20:20:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Tue May 29 21:17:14 2012] Not generating rmf since there are only 81 counts
[Tue May 29 21:17:14 2012] rmf not generated due to insufficient counts
[Tue May 29 22:58:57 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:57 2012] Error reading totcts from fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Tue May 29 22:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:57 2012] Using photon index=1.80, rate=0.0129, arf fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src65.arf
[Tue May 29 22:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:57 2012] Updating source flux to 4.5e-13
[Tue May 29 22:59:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting