[Tue May 29 03:53:55 2012] Detection parameters:
  Position = (327.3, 427.2) = 5 34 27.46 22 8 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.9 +/- 21.5
  Background counts = 159.2
  Rate = 0.03 +/- 0.006

[Tue May 29 03:53:56 2012] Off-axis axis estimate = 9.56'
[Tue May 29 03:55:48 2012] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Tue May 29 03:55:48 2012] Initial guess for spatial extent in simple fitting = 11.21"
[Tue May 29 03:55:48 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.950
[Tue May 29 03:55:48 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 11.21"
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src53.ximg exists
[Tue May 29 06:59:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src53.csv
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src53_1.ximg exists
[Tue May 29 06:59:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src53.csv
[Tue May 29 06:59:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 06:59:58 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Tue May 29 06:59:58 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Tue May 29 06:59:58 2012] Fit fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Tue May 29 10:23:01 2012] Source 55 is offset by -4.979808 and -5.540700 pixels which is larger than
2 X fitted extent = 1.349292 x 1.349292, not incorporating fit results
[Tue May 29 10:23:01 2012] Source 55 is offset by -0.703164 and -3.852700 pixels which is larger than
2 X fitted extent = 1.252212 x 1.252212, not incorporating fit results
[Tue May 29 10:23:01 2012] Spatial fit model total counts = 2145.080000, observed total counts = 2154.000000
[Tue May 29 10:23:01 2012] Offset between fit and detection position for source 55 = 2.690608 pixels
[Tue May 29 10:23:01 2012] 2060.625000 total counts/ 1678.930000 bgd. counts: snr = 9.315371
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 2.690608 pixels
  Position = (326.9, 429.8) = 5 34 27.59 22 9 3.8
  Extent = 20.2 (15.7-22.4)", rotation angle = 0
  Source counts = 381.7 +/- 45.4
  Background counts = 1678.9
  Rate = 0.06 +/- 0.007
[Tue May 29 10:23:01 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:01 2012] Assessing source extent using major axis lower bound
[Tue May 29 10:23:01 2012] Source does appear to be extended
[Tue May 29 10:23:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:01 2012] Source is confused with source 29
[Tue May 29 10:23:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 10:23:30 2012] Initial guess for spatial extent in simple fitting = 20.17"
[Tue May 29 10:23:30 2012] source mask rpix=4.6, npix_max = 105, mask sum = 100, frac = 0.947
[Tue May 29 10:23:30 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 20.17"
[Tue May 29 15:21:55 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src47.ximg exists
[Tue May 29 15:21:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src47.csv
[Tue May 29 15:21:55 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src47_1.ximg exists
[Tue May 29 15:21:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src47.csv
[Tue May 29 15:21:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 15:21:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Tue May 29 15:21:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Tue May 29 15:21:57 2012] Fit fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Tue May 29 19:58:16 2012] Warning, spatial fit 47 centroid is now closest to src. 29
[Tue May 29 19:58:16 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:16 2012] Assessing source extent using major axis lower bound
[Tue May 29 19:58:16 2012] Source does appear to be extended
[Tue May 29 19:58:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 19:58:46 2012] XMMSAS src. selection expression = ellipse(28390.223120, 37345.890000, 1210.206035, 1210.206035, 0.000000, X, Y)
[Tue May 29 19:58:46 2012] Writing source region out to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src55_src.reg
[Tue May 29 19:58:46 2012] Extracting stamp from image fullrun_mos1_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (257, 360) - (396, 499)
[Tue May 29 19:58:46 2012] XMMSAS bgd. selection expression = annulus(28390.223120, 37345.890000, 2017.010058, 4034.020116, X, Y) && !ellipse(27709.833954, 34223.534149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29740.785339, 34119.183533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27899.748199, 39972.421295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27983.309937, 40580.112366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27915.832200, 38705.346000, 3176.880091, 3176.880091, 0.000000, X, Y) && !ellipse(26329.266510, 34295.761566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28966.005310, 34390.790375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28055.087400, 41124.882000, 2025.400058, 2025.400058, 0.000000, X, Y) && !ellipse(28535.630371, 41870.302612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28028.360040, 41699.078000, 2032.872058, 2032.872058, 0.000000, X, Y) && !ellipse(28077.187200, 39470.347000, 1588.440046, 1588.440046, 0.000000, X, Y) && !ellipse(28174.695068, 38937.355469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27687.284790, 38922.301453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27681.618400, 37709.034000, 1781.968051, 1781.968051, 0.000000, X, Y) && !ellipse(27973.530000, 37226.859600, 2168.984062, 2168.984062, 0.000000, X, Y) && !ellipse(27625.021698, 36495.835663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27643.400200, 35809.227000, 563.691216, 563.691216, 0.000000, X, Y) && !ellipse(26919.591034, 34266.110199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30386.541565, 34089.925110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32355.534000, 33912.930000, 3464.352100, 2506.408072, 96.974000, X, Y) && !ellipse(28359.633789, 39710.218567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33479.412000, 35037.774000, 1771.048051, 1771.048051, 0.000000, X, Y) && !ellipse(32839.095673, 34638.977203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32236.111969, 34656.529602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32700.304016, 34137.022675, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 19:58:46 2012] Writing fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src55.gif
[Tue May 29 20:18:17 2012] Mean detx,y = (10061.71, 386.97) 
[Tue May 29 20:18:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 20:18:29 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 20:18:29 2012] Setting source spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Tue May 29 20:18:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Tue May 29 22:58:57 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:57 2012] Error reading totcts from fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Tue May 29 22:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:57 2012] Using photon index=1.80, rate=0.0601, arf fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src55.arf
[Tue May 29 22:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:57 2012] Updating source flux to 1e-12
[Tue May 29 22:59:00 2012] Flag b found in src. 55 procflags, skipping spectral fitting
[Tue May 29 22:59:00 2012] Flag c found in src. 55 procflags, skipping spectral fitting