[Tue May 29 03:53:55 2012] Detection parameters:
  Position = (402.0, 308.5) = 5 34 4.12 22 0 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.0 +/- 18.6
  Background counts = 142.0
  Rate = 0.02 +/- 0.003

[Tue May 29 03:53:56 2012] Off-axis axis estimate = 7.54'
[Tue May 29 03:55:48 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Tue May 29 03:55:48 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Tue May 29 03:55:48 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.927
[Tue May 29 03:55:48 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 10.20"
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src42.ximg exists
[Tue May 29 06:59:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src42.csv
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src42_1.ximg exists
[Tue May 29 06:59:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src42.csv
[Tue May 29 06:59:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 06:59:58 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Tue May 29 06:59:58 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Tue May 29 06:59:58 2012] Fit fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Tue May 29 10:23:01 2012] Source 44 is offset by -1.242227 and -5.275596 pixels which is larger than
2 X fitted extent = 1.149724 x 1.149724, not incorporating fit results
[Tue May 29 10:23:01 2012] Warning, spatial fit 42 centroid is now closest to src. 2
[Tue May 29 10:23:01 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:01 2012] Assessing source extent using major
[Tue May 29 10:23:01 2012] Source does appear to be extended
[Tue May 29 10:23:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:01 2012] Source is confused with source 2
[Tue May 29 10:23:30 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Tue May 29 10:23:30 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Tue May 29 10:23:30 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.927
[Tue May 29 10:23:30 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 10.20"
[Tue May 29 15:21:55 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src39.ximg exists
[Tue May 29 15:21:55 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src39_1.ximg exists
[Tue May 29 15:21:55 2012] Fit fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src39 appears to have run properly
[Tue May 29 15:21:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Tue May 29 15:21:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Tue May 29 15:21:57 2012] Fit fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Tue May 29 19:58:16 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 12.158833 pixels away
[Tue May 29 19:58:16 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:16 2012] Assessing source extent using major
[Tue May 29 19:58:16 2012] Source does appear to be extended
[Tue May 29 19:58:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 19:58:45 2012] XMMSAS src. selection expression = ellipse(34921.634277, 26793.315186, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 19:58:45 2012] Writing source region out to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src44_src.reg
[Tue May 29 19:58:45 2012] Extracting stamp from image fullrun_mos1_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (364, 271) - (439, 346)
[Tue May 29 19:58:45 2012] XMMSAS bgd. selection expression = annulus(34921.634277, 26793.315186, 1087.500000, 2175.000000, X, Y) && !ellipse(34438.314000, 26472.756000, 466.364013, 466.364013, 0.000000, X, Y) && !ellipse(34144.860321, 25895.817047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34176.872009, 25446.129425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34264.663208, 23797.698730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34181.542000, 28702.690000, 1660.664048, 1660.664048, 0.000000, X, Y) && !ellipse(34087.064400, 27478.160000, 952.536027, 952.536027, 0.000000, X, Y) && !ellipse(34141.751282, 29524.769501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35022.743103, 28385.299957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34261.216980, 25030.893463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33894.023773, 24463.850891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35317.002655, 29491.690491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34237.472000, 27532.308000, 1624.648047, 1624.648047, 0.000000, X, Y) && !ellipse(34675.013916, 27708.644501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34579.042448, 26507.940000, 1586.336046, 1586.336046, 0.000000, X, Y) && !ellipse(34846.587219, 25271.571869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34819.232452, 29174.385284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33876.423584, 24046.196198, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 19:58:45 2012] Writing fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src44.gif
[Tue May 29 20:16:15 2012] Mean detx,y = (-82.60, 7494.64) 
[Tue May 29 20:16:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 20:16:29 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 20:16:29 2012] Setting source spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue May 29 20:16:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Tue May 29 21:04:51 2012] Not generating rmf since there are only 99 counts
[Tue May 29 21:04:51 2012] rmf not generated due to insufficient counts
[Tue May 29 22:58:57 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:57 2012] Error reading totcts from fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue May 29 22:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:57 2012] Using photon index=1.80, rate=0.0157, arf fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src44.arf
[Tue May 29 22:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:57 2012] Updating source flux to 3.7e-13
[Tue May 29 22:59:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting