[Tue May 29 03:53:55 2012] Detection parameters:
  Position = (403.1, 326.8) = 5 34 3.75 22 1 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 205.9 +/- 21.5
  Background counts = 210.5
  Rate = 0.05 +/- 0.006

[Tue May 29 03:53:56 2012] Off-axis axis estimate = 7.86'
[Tue May 29 03:55:48 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Tue May 29 03:55:48 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Tue May 29 03:55:48 2012] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.602
[Tue May 29 03:55:48 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.36"
[Tue May 29 06:59:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src17.ximg exists
[Tue May 29 06:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src17.csv
[Tue May 29 06:59:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue May 29 06:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src17.csv
[Tue May 29 06:59:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue May 29 06:59:57 2012] Fit fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue May 29 10:23:01 2012] Warning, spatial fit 17 centroid is now closest to src. 9
[Tue May 29 10:23:01 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:01 2012] Assessing source extent using major
[Tue May 29 10:23:01 2012] Source does appear to be extended
[Tue May 29 10:23:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:01 2012] Source is confused with source 8
[Tue May 29 10:23:30 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Tue May 29 10:23:30 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Tue May 29 10:23:30 2012] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.602
[Tue May 29 10:23:30 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 10.36"
[Tue May 29 15:21:55 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src17.ximg exists
[Tue May 29 15:21:55 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue May 29 15:21:55 2012] Fit fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src17 appears to have run properly
[Tue May 29 15:21:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue May 29 15:21:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue May 29 15:21:56 2012] Fit fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Tue May 29 19:58:16 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 13.266107 pixels away
[Tue May 29 19:58:16 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:16 2012] Assessing source extent using major
[Tue May 29 19:58:16 2012] Source does appear to be extended
[Tue May 29 19:58:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 19:58:44 2012] XMMSAS src. selection expression = ellipse(35022.743103, 28385.299957, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 19:58:44 2012] Writing source region out to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src18_src.reg
[Tue May 29 19:58:44 2012] Extracting stamp from image fullrun_mos1_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (366, 289) - (441, 364)
[Tue May 29 19:58:45 2012] XMMSAS bgd. selection expression = annulus(35022.743103, 28385.299957, 1087.500000, 2175.000000, X, Y) && !ellipse(34438.314000, 26472.756000, 466.364013, 466.364013, 0.000000, X, Y) && !ellipse(34144.860321, 25895.817047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34176.872009, 25446.129425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34181.542000, 28702.690000, 1660.664048, 1660.664048, 0.000000, X, Y) && !ellipse(34087.064400, 27478.160000, 952.536027, 952.536027, 0.000000, X, Y) && !ellipse(34222.586304, 30742.057953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34141.751282, 29524.769501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32355.534000, 33912.930000, 3464.352100, 2506.408072, 96.974000, X, Y) && !ellipse(35901.652000, 31047.503600, 1594.600046, 1594.600046, 0.000000, X, Y) && !ellipse(35317.002655, 29491.690491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34237.472000, 27532.308000, 1624.648047, 1624.648047, 0.000000, X, Y) && !ellipse(34675.013916, 27708.644501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34921.634277, 26793.315186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34579.042448, 26507.940000, 1586.336046, 1586.336046, 0.000000, X, Y) && !ellipse(34819.232452, 29174.385284, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 19:58:45 2012] Writing fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src18.gif
[Tue May 29 20:08:49 2012] Mean detx,y = (1527.11, 7538.69) 
[Tue May 29 20:08:50 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 20:09:00 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 20:09:00 2012] Setting source spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue May 29 20:09:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue May 29 20:36:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 29 20:36:37 2012] rmf not generated due to insufficient counts
[Tue May 29 22:58:57 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:57 2012] Error reading totcts from fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue May 29 22:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:57 2012] Using photon index=1.80, rate=0.0528, arf fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src18.arf
[Tue May 29 22:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:57 2012] Updating source flux to 8.8e-13
[Tue May 29 22:59:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting