[Tue May 29 03:53:55 2012] Detection parameters:
  Position = (333.5, 395.9) = 5 34 25.52 22 6 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 228.8 +/- 28.5
  Background counts = 185.2
  Rate = 0.06 +/- 0.007

[Tue May 29 03:53:56 2012] Off-axis axis estimate = 7.51'
[Tue May 29 03:55:48 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Tue May 29 03:55:48 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Tue May 29 03:55:48 2012] source mask rpix=2.3, npix_max = 32, mask sum = 18, frac = 0.558
[Tue May 29 03:55:48 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.18"
[Tue May 29 06:59:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src15.ximg exists
[Tue May 29 06:59:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue May 29 06:59:56 2012] Fit fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src15 appears to have run properly
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue May 29 06:59:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue May 29 06:59:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue May 29 06:59:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:23:01 2012] Spatial fit model total counts = 3649.370000, observed total counts = 2472.000000
[Tue May 29 10:23:01 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 29 10:23:01 2012] Warning, spatial fit 15 centroid is now closest to src. 32
[Tue May 29 10:23:01 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:01 2012] Assessing source extent using major
[Tue May 29 10:23:01 2012] Source does appear to be extended
[Tue May 29 10:23:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:30 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Tue May 29 10:23:30 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Tue May 29 10:23:30 2012] source mask rpix=2.3, npix_max = 32, mask sum = 18, frac = 0.558
[Tue May 29 10:23:30 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 10.18"
[Tue May 29 15:21:55 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src15.ximg exists
[Tue May 29 15:21:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src15.csv
[Tue May 29 15:21:55 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue May 29 15:21:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src15.csv
[Tue May 29 15:21:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 15:21:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue May 29 15:21:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src15.csv
[Tue May 29 15:21:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue May 29 15:21:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src15.csv
[Tue May 29 15:21:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:16 2012] Spatial fit model total counts = 3649.370000, observed total counts = 2472.000000
[Tue May 29 19:58:16 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 29 19:58:16 2012] Spatial fit model total counts = 3566.340000, observed total counts = 3085.000000
[Tue May 29 19:58:16 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 29 19:58:16 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:16 2012] Assessing source extent using major
[Tue May 29 19:58:16 2012] Source does appear to be extended
[Tue May 29 19:58:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 19:58:44 2012] XMMSAS src. selection expression = ellipse(28966.005310, 34390.790375, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 19:58:44 2012] Writing source region out to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src16_src.reg
[Tue May 29 19:58:44 2012] Extracting stamp from image fullrun_mos1_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (296, 358) - (371, 433)
[Tue May 29 19:58:44 2012] XMMSAS bgd. selection expression = annulus(28966.005310, 34390.790375, 1087.500000, 2175.000000, X, Y) && !ellipse(27709.833954, 34223.534149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29740.785339, 34119.183533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27915.832200, 38705.346000, 3176.880091, 3176.880091, 0.000000, X, Y) && !ellipse(26329.266510, 34295.761566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27681.618400, 37709.034000, 1781.968051, 1781.968051, 0.000000, X, Y) && !ellipse(27973.530000, 37226.859600, 2168.984062, 2168.984062, 0.000000, X, Y) && !ellipse(27625.021698, 36495.835663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27643.400200, 35809.227000, 563.691216, 563.691216, 0.000000, X, Y) && !ellipse(26919.591034, 34266.110199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30386.541565, 34089.925110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32355.534000, 33912.930000, 3464.352100, 2506.408072, 96.974000, X, Y) && !ellipse(28390.223120, 37345.890000, 1613.608046, 1613.608046, 0.000000, X, Y)
[Tue May 29 19:58:44 2012] Writing fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src16.gif
[Tue May 29 20:08:21 2012] Mean detx,y = (7216.01, 1207.86) 
[Tue May 29 20:08:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 20:08:33 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 20:08:33 2012] Setting source spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue May 29 20:08:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue May 29 20:36:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 29 20:36:27 2012] rmf not generated due to insufficient counts
[Tue May 29 22:58:57 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:57 2012] Error reading totcts from fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue May 29 22:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:57 2012] Using photon index=1.80, rate=0.0557, arf fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src16.arf
[Tue May 29 22:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:57 2012] Updating source flux to 9.1e-13
[Tue May 29 22:59:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting