[Tue May 29 03:53:55 2012] Detection parameters:
  Position = (322.1, 443.0) = 5 34 29.10 22 10 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.0 +/- 22.5
  Background counts = 103.4
  Rate = 0.05 +/- 0.007

[Tue May 29 03:53:56 2012] Off-axis axis estimate = 10.62'
[Tue May 29 03:55:48 2012] Using EEF radius (= 11.74 ")to estimate initial spatial extent for simple fitting
[Tue May 29 03:55:48 2012] Initial guess for spatial extent in simple fitting = 11.74"
[Tue May 29 03:55:48 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.880
[Tue May 29 03:55:48 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.74"
[Tue May 29 06:59:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src13.ximg exists
[Tue May 29 06:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src13.csv
[Tue May 29 06:59:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue May 29 06:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src13.csv
[Tue May 29 06:59:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue May 29 06:59:57 2012] Fit fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue May 29 10:23:01 2012] Warning, spatial fit 13 centroid is now closest to src. 55
[Tue May 29 10:23:01 2012] Source 14 is offset by -9.297973 and 1.313088 pixels which is larger than
2 X fitted extent = 1.691081 x 1.691081, not incorporating fit results
[Tue May 29 10:23:01 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:01 2012] Assessing source extent using major
[Tue May 29 10:23:01 2012] Source does appear to be extended
[Tue May 29 10:23:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:01 2012] Source is confused with source 25
[Tue May 29 10:23:01 2012] Source is confused with source 26
[Tue May 29 10:23:01 2012] Source is confused with source 27
[Tue May 29 10:23:01 2012] Source is confused with source 28
[Tue May 29 10:23:30 2012] Using EEF radius (= 11.74 ")to estimate initial spatial extent for simple fitting
[Tue May 29 10:23:30 2012] Initial guess for spatial extent in simple fitting = 11.74"
[Tue May 29 10:23:30 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.880
[Tue May 29 10:23:30 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 11.74"
[Tue May 29 15:21:55 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src13.ximg exists
[Tue May 29 15:21:55 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue May 29 15:21:55 2012] Fit fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src13 appears to have run properly
[Tue May 29 15:21:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue May 29 15:21:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue May 29 15:21:56 2012] Fit fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue May 29 19:58:16 2012] Warning, spatial fit 13 centroid is now closest to src. 29
[Tue May 29 19:58:16 2012] Spatial fit model total counts = 4520.500000, observed total counts = 4508.000000
[Tue May 29 19:58:16 2012] Offset between fit and detection position for source 14 = 2.518999 pixels
[Tue May 29 19:58:16 2012] Warning, changing simple spatial fit ID from 13 to 23
[Tue May 29 19:58:16 2012] 4195.400000 total counts/ 2008.280000 bgd. counts: snr = 48.804569
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 2.518999 pixels
  Position = (321.4, 445.4) = 5 34 29.30 22 10 11.8
  Extent = 39.7 (38.2-79.4)", rotation angle = 0
  Source counts = 2187.1 +/- 64.8
  Background counts = 2008.3
  Rate = 0.3 +/- 0.01
[Tue May 29 19:58:16 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:16 2012] Assessing source extent using major axis lower bound
[Tue May 29 19:58:16 2012] Source does appear to be extended
[Tue May 29 19:58:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 19:58:44 2012] Counts = 2187.120000, rescaling region sizes by 2.000000
[Tue May 29 19:58:44 2012] XMMSAS src. selection expression = ellipse(27915.832200, 38705.346000, 4765.320137, 4765.320137, 0.000000, X, Y)
[Tue May 29 19:58:44 2012] Writing source region out to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src14_src.reg
[Tue May 29 19:58:44 2012] Extracting stamp from image fullrun_mos1_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (48, 172) - (595, 595)
[Tue May 29 19:58:44 2012] XMMSAS bgd. selection expression = annulus(27915.832200, 38705.346000, 15884.400457, 31768.800914, X, Y) && !ellipse(20606.938950, 25857.799683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34438.314000, 26472.756000, 466.364013, 466.364013, 0.000000, X, Y) && !ellipse(27709.833954, 34223.534149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34144.860321, 25895.817047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34176.872009, 25446.129425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34264.663208, 23797.698730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29740.785339, 34119.183533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34181.542000, 28702.690000, 1660.664048, 1660.664048, 0.000000, X, Y) && !ellipse(34087.064400, 27478.160000, 952.536027, 952.536027, 0.000000, X, Y) && !ellipse(27899.748199, 39972.421295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34222.586304, 30742.057953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33942.969238, 23607.688904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27983.309937, 40580.112366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.266510, 34295.761566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28966.005310, 34390.790375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34141.751282, 29524.769501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35022.743103, 28385.299957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34261.216980, 25030.893463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33894.023773, 24463.850891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28055.087400, 41124.882000, 2025.400058, 2025.400058, 0.000000, X, Y) && !ellipse(28535.630371, 41870.302612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28028.360040, 41699.078000, 2032.872058, 2032.872058, 0.000000, X, Y) && !ellipse(28077.187200, 39470.347000, 1588.440046, 1588.440046, 0.000000, X, Y) && !ellipse(28174.695068, 38937.355469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27687.284790, 38922.301453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27681.618400, 37709.034000, 1781.968051, 1781.968051, 0.000000, X, Y) && !ellipse(27973.530000, 37226.859600, 2168.984062, 2168.984062, 0.000000, X, Y) && !ellipse(27625.021698, 36495.835663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27643.400200, 35809.227000, 563.691216, 563.691216, 0.000000, X, Y) && !ellipse(34001.148895, 21494.808624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26919.591034, 34266.110199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30386.541565, 34089.925110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32355.534000, 33912.930000, 3464.352100, 2506.408072, 96.974000, X, Y) && !ellipse(34446.535370, 32313.344116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34381.309265, 31529.478577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35901.652000, 31047.503600, 1594.600046, 1594.600046, 0.000000, X, Y) && !ellipse(35317.002655, 29491.690491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34237.472000, 27532.308000, 1624.648047, 1624.648047, 0.000000, X, Y) && !ellipse(34675.013916, 27708.644501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34921.634277, 26793.315186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34579.042448, 26507.940000, 1586.336046, 1586.336046, 0.000000, X, Y) && !ellipse(34846.587219, 25271.571869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34291.479004, 23005.448608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33992.719177, 22395.917603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28002.319600, 42452.985800, 849.176024, 849.176024, 0.000000, X, Y) && !ellipse(28359.633789, 39710.218567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.223120, 37345.890000, 1613.608046, 1613.608046, 0.000000, X, Y) && !ellipse(33479.412000, 35037.774000, 1771.048051, 1771.048051, 0.000000, X, Y) && !ellipse(32839.095673, 34638.977203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32236.111969, 34656.529602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32700.304016, 34137.022675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33779.939819, 34160.312592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34503.594604, 32920.748444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34819.232452, 29174.385284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33996.561005, 21973.145340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20296.901886, 24641.459076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33876.423584, 24046.196198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28500.505000, 43742.160000, 2196.928063, 2196.928063, 0.000000, X, Y)
[Tue May 29 19:58:44 2012] Writing fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src14.gif
[Tue May 29 20:01:59 2012] Mean detx,y = (10178.14, 150.18) 
[Tue May 29 20:02:01 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 20:08:03 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 20:08:03 2012] Setting source spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue May 29 20:08:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue May 29 22:58:57 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:57 2012] Error reading totcts from fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue May 29 22:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:57 2012] Using photon index=1.80, rate=0.344, arf fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src14.arf
[Tue May 29 22:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:57 2012] Updating source flux to 6.2e-12
[Tue May 29 22:59:00 2012] Flag b found in src. 14 procflags, skipping spectral fitting
[Tue May 29 22:59:00 2012] Flag c found in src. 14 procflags, skipping spectral fitting