[Tue May 29 03:53:55 2012] Detection parameters:
  Position = (390.7, 271.9) = 5 34 7.65 21 57 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 199.0 +/- 25.2
  Background counts = 91.4
  Rate = 0.03 +/- 0.004

[Tue May 29 03:53:56 2012] Off-axis axis estimate = 6.96'
[Tue May 29 03:55:48 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Tue May 29 03:55:48 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Tue May 29 03:55:48 2012] source mask rpix=2.3, npix_max = 30, mask sum = 26, frac = 0.842
[Tue May 29 03:55:48 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.91"
[Tue May 29 06:59:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src11.ximg exists
[Tue May 29 06:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src11.csv
[Tue May 29 06:59:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue May 29 06:59:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src11.csv
[Tue May 29 06:59:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue May 29 06:59:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue May 29 06:59:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue May 29 06:59:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:23:01 2012] Warning, spatial fit 11 centroid is now closest to src. 47
[Tue May 29 10:23:01 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:01 2012] Assessing source extent using major
[Tue May 29 10:23:01 2012] Source does appear to be extended
[Tue May 29 10:23:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:01 2012] Source is confused with source 6
[Tue May 29 10:23:30 2012] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Tue May 29 10:23:30 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Tue May 29 10:23:30 2012] source mask rpix=2.3, npix_max = 30, mask sum = 26, frac = 0.842
[Tue May 29 10:23:30 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.91"
[Tue May 29 15:21:55 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src11.ximg exists
[Tue May 29 15:21:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src11.csv
[Tue May 29 15:21:55 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue May 29 15:21:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src11.csv
[Tue May 29 15:21:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 15:21:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue May 29 15:21:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue May 29 15:21:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue May 29 15:21:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue May 29 15:21:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:16 2012] Warning, spatial fit 11 centroid is now closest to src. 47
[Tue May 29 19:58:16 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:16 2012] Assessing source extent using major
[Tue May 29 19:58:16 2012] Source does appear to be extended
[Tue May 29 19:58:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 19:58:44 2012] XMMSAS src. selection expression = ellipse(33942.969238, 23607.688904, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 19:58:44 2012] Writing source region out to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src12_src.reg
[Tue May 29 19:58:44 2012] Extracting stamp from image fullrun_mos1_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (353, 234) - (428, 309)
[Tue May 29 19:58:44 2012] XMMSAS bgd. selection expression = annulus(33942.969238, 23607.688904, 1087.500000, 2175.000000, X, Y) && !ellipse(34144.860321, 25895.817047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34176.872009, 25446.129425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34264.663208, 23797.698730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34261.216980, 25030.893463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33894.023773, 24463.850891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34001.148895, 21494.808624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34579.042448, 26507.940000, 1586.336046, 1586.336046, 0.000000, X, Y) && !ellipse(34846.587219, 25271.571869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34291.479004, 23005.448608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33992.719177, 22395.917603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33996.561005, 21973.145340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33876.423584, 24046.196198, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 19:58:44 2012] Writing fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src12.gif
[Tue May 29 20:01:26 2012] Mean detx,y = (-3270.89, 6942.94) 
[Tue May 29 20:01:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 20:01:40 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 20:01:40 2012] Setting source spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue May 29 20:01:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue May 29 20:32:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 29 20:32:01 2012] rmf not generated due to insufficient counts
[Tue May 29 22:58:57 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:57 2012] Error reading totcts from fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue May 29 22:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:57 2012] Using photon index=1.80, rate=0.0313, arf fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src12.arf
[Tue May 29 22:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:57 2012] Updating source flux to 6.4e-13
[Tue May 29 22:59:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting