[Tue May 29 03:53:55 2012] Detection parameters:
  Position = (321.2, 460.0) = 5 34 29.36 22 11 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.7 +/- 22.7
  Background counts = 69.7
  Rate = 0.03 +/- 0.004

[Tue May 29 03:53:56 2012] Off-axis axis estimate = 11.83'
[Tue May 29 03:55:48 2012] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Tue May 29 03:55:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 29 03:55:48 2012] Initial guess for spatial extent in simple fitting = 12.34"
[Tue May 29 03:55:48 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.943
[Tue May 29 03:55:48 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 12.34"
[Tue May 29 06:59:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src9.ximg exists
[Tue May 29 06:59:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src9.csv
[Tue May 29 06:59:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue May 29 06:59:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src9.csv
[Tue May 29 06:59:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue May 29 06:59:57 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue May 29 06:59:57 2012] Fit fullrun_mos1_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue May 29 10:23:01 2012] Warning, spatial fit 9 centroid is now closest to src. 54
[Tue May 29 10:23:01 2012] Source 10 is offset by -1.256940 and -3.267663 pixels which is larger than
2 X fitted extent = 1.391609 x 1.391609, not incorporating fit results
[Tue May 29 10:23:01 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:01 2012] Assessing source extent using major
[Tue May 29 10:23:01 2012] Source does appear to be extended
[Tue May 29 10:23:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:01 2012] Source is confused with source 13
[Tue May 29 10:23:01 2012] Source is confused with source 25
[Tue May 29 10:23:01 2012] Source is confused with source 53
[Tue May 29 10:23:30 2012] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Tue May 29 10:23:30 2012] Initial guess for spatial extent in simple fitting = 12.34"
[Tue May 29 10:23:30 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.943
[Tue May 29 10:23:30 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 12.34"
[Tue May 29 15:21:54 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src9.ximg exists
[Tue May 29 15:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src9.csv
[Tue May 29 15:21:54 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue May 29 15:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src9.csv
[Tue May 29 15:21:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 15:21:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue May 29 15:21:56 2012] fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue May 29 15:21:56 2012] Fit fullrun_mos1_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue May 29 19:58:16 2012] Warning, spatial fit 9 centroid is now closest to src. 13
[Tue May 29 19:58:16 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:16 2012] Assessing source extent using major
[Tue May 29 19:58:16 2012] Source does appear to be extended
[Tue May 29 19:58:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 19:58:44 2012] XMMSAS src. selection expression = ellipse(27899.748199, 39972.421295, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 19:58:44 2012] Writing source region out to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src10_src.reg
[Tue May 29 19:58:44 2012] Extracting stamp from image fullrun_mos1_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (284, 423) - (359, 498)
[Tue May 29 19:58:44 2012] XMMSAS bgd. selection expression = annulus(27899.748199, 39972.421295, 1087.500000, 2175.000000, X, Y) && !ellipse(27983.309937, 40580.112366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27915.832200, 38705.346000, 3176.880091, 3176.880091, 0.000000, X, Y) && !ellipse(28055.087400, 41124.882000, 2025.400058, 2025.400058, 0.000000, X, Y) && !ellipse(28535.630371, 41870.302612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28028.360040, 41699.078000, 2032.872058, 2032.872058, 0.000000, X, Y) && !ellipse(28077.187200, 39470.347000, 1588.440046, 1588.440046, 0.000000, X, Y) && !ellipse(28174.695068, 38937.355469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27687.284790, 38922.301453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27681.618400, 37709.034000, 1781.968051, 1781.968051, 0.000000, X, Y) && !ellipse(27973.530000, 37226.859600, 2168.984062, 2168.984062, 0.000000, X, Y) && !ellipse(28002.319600, 42452.985800, 849.176024, 849.176024, 0.000000, X, Y) && !ellipse(28359.633789, 39710.218567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.223120, 37345.890000, 1613.608046, 1613.608046, 0.000000, X, Y) && !ellipse(28500.505000, 43742.160000, 2196.928063, 2196.928063, 0.000000, X, Y)
[Tue May 29 19:58:44 2012] Writing fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src10.gif
[Tue May 29 20:01:02 2012] Mean detx,y = (12728.58, -109.96) 
[Tue May 29 20:01:03 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 20:01:08 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 20:01:08 2012] Setting source spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue May 29 20:01:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue May 29 20:31:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 29 20:31:49 2012] rmf not generated due to insufficient counts
[Tue May 29 22:58:57 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:57 2012] Error reading totcts from fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue May 29 22:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:57 2012] Using photon index=1.80, rate=0.0335, arf fullrun_mos1_xmm0611181401_pi300-10000_pass1_cl_src10.arf
[Tue May 29 22:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:57 2012] Updating source flux to 8e-13
[Tue May 29 22:59:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting