[Thu Jun  6 23:34:33 2013] Detection parameters:
  Position = (395.9, 300.1) = 5 34 6.06 21 59 36.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.2 +/- 24.4
  Background counts = 147.8
  Rate = 0.07 +/- 0.006

[Thu Jun  6 23:34:34 2013] Off-axis axis estimate = 7.06'
[Thu Jun  6 23:37:02 2013] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Thu Jun  6 23:37:02 2013] Initial guess for spatial extent in simple fitting = 9.96"
[Thu Jun  6 23:37:02 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.899
[Thu Jun  6 23:37:02 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 9.96"
[Fri Jun  7 05:14:48 2013] fullrun_mos1_xmm0611181301_pi300-10000_cl_pass0_src8.ximg exists
[Fri Jun  7 05:14:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181301_pi300-10000_cl_pass0_src8.csv
[Fri Jun  7 05:14:48 2013] fullrun_mos1_xmm0611181301_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Jun  7 05:14:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181301_pi300-10000_cl_pass0_src8.csv
[Fri Jun  7 05:14:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 05:14:50 2013] fullrun_mos1_xmm0611181301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Jun  7 05:14:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181301_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Jun  7 05:14:50 2013] fullrun_mos1_xmm0611181301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Jun  7 05:14:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181301_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Jun  7 05:14:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181301_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 13:15:52 2013] Warning, spatial fit 8 centroid is now closest to src. 10
[Fri Jun  7 13:15:52 2013] Spatial fit model total counts = 2104.750000, observed total counts = 2210.000000
[Fri Jun  7 13:15:52 2013] Offset between fit and detection position for source 9 = 0.527840 pixels
[Fri Jun  7 13:15:52 2013] Warning, changing simple spatial fit ID from 8 to 62
[Fri Jun  7 13:15:52 2013] 1986.768000 total counts/ 1765.870000 bgd. counts: snr = 5.256691
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.527840 pixels
  Position = (396.1, 300.6) = 5 34 5.99 21 59 42.0
  Extent = 20.2 (16.2-40.3)" x 4.4 (3.4-5.8)", rotation angle = 90 (85-98) degrees
  Source counts = 220.9 +/- 44.6
  Background counts = 1765.9
  Rate = 0.04 +/- 0.008
[Fri Jun  7 13:15:52 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 13:15:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 13:15:52 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 13:15:52 2013] Source does appear to be extended
[Fri Jun  7 13:15:52 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.78
[Fri Jun  7 13:15:52 2013] Source is asymmetric
[Fri Jun  7 13:15:52 2013] Source is confused with source 1
[Fri Jun  7 13:16:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  7 13:16:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  7 13:16:39 2013] Initial guess for spatial extent in simple fitting = 12.29"
[Fri Jun  7 13:16:39 2013] source mask rpix=2.8, npix_max = 44, mask sum = 33, frac = 0.746
[Fri Jun  7 13:16:39 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 12.29"
[Fri Jun  7 18:02:01 2013] fullrun_mos1_xmm0611181301_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jun  7 18:02:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181301_pi300-10000_cl_pass1_src8.csv
[Fri Jun  7 18:02:01 2013] fullrun_mos1_xmm0611181301_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jun  7 18:02:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181301_pi300-10000_cl_pass1_src8.csv
[Fri Jun  7 18:02:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 18:02:03 2013] fullrun_mos1_xmm0611181301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jun  7 18:02:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Jun  7 18:02:03 2013] fullrun_mos1_xmm0611181301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jun  7 18:02:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Jun  7 18:02:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181301_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 22:46:35 2013] Warning, spatial fit 8 centroid is now closest to src. 35
[Fri Jun  7 22:46:36 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 22:46:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 22:46:36 2013] Assessing source extent using major axis lower bound
[Fri Jun  7 22:46:36 2013] Source does appear to be extended
[Fri Jun  7 22:46:36 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.78
[Fri Jun  7 22:46:36 2013] Source is asymmetric
[Fri Jun  7 22:47:05 2013] XMMSAS src. selection expression = ellipse(34409.400000, 26105.659400, 1209.354035, 265.459208, 89.945015, X, Y)
[Fri Jun  7 22:47:05 2013] Writing source region out to fullrun_mos1_xmm0611181301_pi300-10000_pass1_cl_src9_src.reg
[Fri Jun  7 22:47:05 2013] Extracting stamp from image fullrun_mos1_xmm0611181301_pi300-10000_cl_sm2.00.img.gz, (327, 231) - (466, 370)
[Fri Jun  7 22:47:05 2013] XMMSAS bgd. selection expression = annulus(34409.400000, 26105.659400, 2015.590058, 4031.180116, X, Y) && !ellipse(34212.584808, 26878.414185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34157.723938, 27788.433441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34193.300000, 25355.805200, 1636.944047, 1636.944047, 0.000000, X, Y) && !ellipse(34157.591187, 30304.519745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34287.552216, 29438.690796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34265.693359, 28739.964081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34637.153198, 26412.339722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35035.856293, 25164.600739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34286.028229, 25034.735291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34060.300293, 24538.847504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33794.922150, 23005.406128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34088.077209, 23873.213074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34078.221741, 23437.682068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33924.322968, 21804.898788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34377.504608, 22062.605225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34084.872589, 22603.705505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34515.738708, 30664.164703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35299.638763, 30051.089233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34673.736847, 25984.335724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34566.388702, 25493.911987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34287.085000, 23236.945800, 1624.464047, 350.486410, 97.663580, X, Y)
[Fri Jun  7 22:47:05 2013] Writing fullrun_mos1_xmm0611181301_pi300-10000_pass1_cl_src9.gif
[Fri Jun  7 22:57:51 2013] Mean detx,y = (-823.77, 7115.92) 
[Fri Jun  7 22:57:52 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 22:58:19 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 22:58:19 2013] Setting source spectrum file to fullrun_mos1_xmm0611181301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun  7 22:58:19 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0611181301_pi300-10000_pass1_cl_src9_bgd.pi.gz