[Sat Nov 26 10:18:32 2011] Detection parameters:
  Position = (292.1, 181.0) = 5 34 29.62 21 53 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.8 +/- 24.4
  Background counts = 201.0
  Rate = 0.03 +/- 0.005

[Sat Nov 26 10:18:32 2011] Off-axis axis estimate = 8.52'
[Sat Nov 26 17:43:44 2011] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 17:43:44 2011] Initial guess for spatial extent in simple fitting = 10.69"
[Sat Nov 26 17:43:44 2011] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.029
[Sat Nov 26 17:43:44 2011] Giving source the simple spatial ID 63 for pass 0, mean size = 10.69"
[Sun Nov 27 04:52:09 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_src63.ximg exists
[Sun Nov 27 04:52:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_src63.csv
[Sun Nov 27 04:52:09 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_src63_1.ximg exists
[Sun Nov 27 04:52:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_src63.csv
[Sun Nov 27 04:52:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 04:52:11 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sun Nov 27 04:52:11 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sun Nov 27 04:52:11 2011] Fit fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Sun Nov 27 04:53:18 2011] Source 98 is offset by 1.350313 and 4.780851 pixels which is larger than
2 X fitted extent = 1.217168 x 1.217168, not incorporating fit results
[Sun Nov 27 04:53:18 2011] Source 98 is offset by -7.933434 and -2.935401 pixels which is larger than
2 X fitted extent = 1.252635 x 10.021058, not incorporating fit results
[Sun Nov 27 04:53:19 2011] Warning, spatial fit 63 centroid is now closest to src. 23
[Sun Nov 27 04:53:19 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 04:53:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 04:53:19 2011] Assessing source extent using major
[Sun Nov 27 04:53:19 2011] Source does appear to be extended
[Sun Nov 27 04:53:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 13:57:56 2011] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 13:57:56 2011] Initial guess for spatial extent in simple fitting = 10.69"
[Sun Nov 27 13:57:56 2011] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.029
[Sun Nov 27 13:57:56 2011] Giving source the simple spatial ID 57 for pass 1, mean size = 10.69"
[Mon Nov 28 04:03:12 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass1_src57.ximg exists
[Mon Nov 28 04:03:12 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass1_src57_1.ximg exists
[Mon Nov 28 04:03:12 2011] Fit fullrun_mos2_xmm0611181201_pi300-10000_cl_pass1_src57 appears to have run properly
[Mon Nov 28 04:03:15 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Mon Nov 28 04:03:15 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Mon Nov 28 04:03:15 2011] Fit fullrun_mos2_xmm0611181201_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Mon Nov 28 04:04:21 2011] Source 98 is offset by -1.933434 and -5.977562 pixels which is larger than
2 X fitted extent = 1.252635 x 1.252635, not incorporating fit results
[Mon Nov 28 04:04:21 2011] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 98 at 11.112325 pixels away
[Mon Nov 28 04:04:22 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 04:04:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 04:04:22 2011] Assessing source extent using major
[Mon Nov 28 04:04:22 2011] Source does appear to be extended
[Mon Nov 28 04:04:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 09:43:36 2011] XMMSAS src. selection expression = ellipse(25363.125244, 15702.286072, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 09:43:36 2011] Writing source region out to fullrun_mos2_xmm0611181201_pi300-10000_pass1_cl_src98_src.reg
[Mon Nov 28 09:43:36 2011] Extracting stamp from image fullrun_mos2_xmm0611181201_pi300-10000_cl_sm2.00.img.gz, (255, 144) - (330, 219)
[Mon Nov 28 09:43:36 2011] XMMSAS bgd. selection expression = annulus(25363.125244, 15702.286072, 1087.500000, 2175.000000, X, Y) && !ellipse(25213.498800, 17650.390000, 1641.784047, 1641.784047, 0.000000, X, Y) && !ellipse(24406.990784, 14392.268066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24450.952759, 16037.600342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25181.407074, 16746.681671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24651.027802, 15263.846481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.888000, 16797.758600, 424.255212, 424.255212, 0.000000, X, Y) && !ellipse(24398.210602, 13853.601120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23970.516200, 16716.636000, 540.902416, 540.902416, 0.000000, X, Y) && !ellipse(24393.089050, 13347.296326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23279.917600, 17523.611860, 1484.568043, 1484.568043, 0.000000, X, Y) && !ellipse(23943.658966, 15387.061081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23970.485382, 12663.461670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23903.921143, 16136.411240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23994.962097, 14576.383728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23874.256500, 13519.413910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23604.342000, 17450.997920, 1568.072045, 1568.072045, 0.000000, X, Y)
[Mon Nov 28 09:43:36 2011] Writing fullrun_mos2_xmm0611181201_pi300-10000_pass1_cl_src98.gif
[Mon Nov 28 11:52:35 2011] Mean detx,y = (1135.13, 8582.24) 
[Mon Nov 28 11:52:38 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 11:53:02 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 11:53:02 2011] Setting source spectrum file to fullrun_mos2_xmm0611181201_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Mon Nov 28 11:53:02 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611181201_pi300-10000_pass1_cl_src98_bgd.pi.gz
[Mon Nov 28 15:46:23 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Nov 28 15:46:23 2011] rmf not generated due to insufficient counts
[Mon Nov 28 17:13:13 2011] Updating aperture counts using extracted products
[Mon Nov 28 17:13:13 2011] Error reading totcts from fullrun_mos2_xmm0611181201_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Mon Nov 28 17:13:19 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 17:13:19 2011] Using photon index=1.80, rate=0.0296, arf fullrun_mos2_xmm0611181201_pi300-10000_pass1_cl_src98.arf
[Mon Nov 28 17:13:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 17:13:19 2011] Updating source flux to 6.3e-13
[Mon Nov 28 17:23:35 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting