[Sat Nov 26 10:18:28 2011] Detection parameters:
  Position = (270.5, 201.1) = 5 34 36.37 21 55 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 251.4 +/- 26.0
  Background counts = 249.9
  Rate = 0.03 +/- 0.003

[Sat Nov 26 10:18:32 2011] Off-axis axis estimate = 7.34'
[Sat Nov 26 17:43:44 2011] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 17:43:44 2011] Initial guess for spatial extent in simple fitting = 10.10"
[Sat Nov 26 17:43:44 2011] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.628
[Sat Nov 26 17:43:44 2011] Giving source the simple spatial ID 59 for pass 0, mean size = 10.10"
[Sun Nov 27 04:52:08 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_src59.ximg exists
[Sun Nov 27 04:52:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_src59.csv
[Sun Nov 27 04:52:08 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_src59_1.ximg exists
[Sun Nov 27 04:52:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_src59.csv
[Sun Nov 27 04:52:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 04:52:11 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sun Nov 27 04:52:11 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sun Nov 27 04:52:11 2011] Fit fullrun_mos2_xmm0611181201_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Sun Nov 27 04:53:19 2011] Warning, spatial fit 59 centroid is now closest to src. 97
[Sun Nov 27 04:53:19 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 04:53:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 04:53:19 2011] Assessing source extent using major
[Sun Nov 27 04:53:19 2011] Source does appear to be extended
[Sun Nov 27 04:53:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 04:53:19 2011] Source is confused with source 21
[Sun Nov 27 04:53:19 2011] Source is confused with source 97
[Sun Nov 27 13:57:56 2011] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 13:57:56 2011] Initial guess for spatial extent in simple fitting = 10.10"
[Sun Nov 27 13:57:56 2011] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.628
[Sun Nov 27 13:57:56 2011] Giving source the simple spatial ID 53 for pass 1, mean size = 10.10"
[Mon Nov 28 04:03:12 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass1_src53.ximg exists
[Mon Nov 28 04:03:12 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass1_src53_1.ximg exists
[Mon Nov 28 04:03:12 2011] Fit fullrun_mos2_xmm0611181201_pi300-10000_cl_pass1_src53 appears to have run properly
[Mon Nov 28 04:03:15 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Mon Nov 28 04:03:15 2011] fullrun_mos2_xmm0611181201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Mon Nov 28 04:03:15 2011] Fit fullrun_mos2_xmm0611181201_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Mon Nov 28 04:04:21 2011] Spatial fit model total counts = 3026.450000, observed total counts = 3116.000000
[Mon Nov 28 04:04:21 2011] Offset between fit and detection position for source 20 = 1.377600 pixels
[Mon Nov 28 04:04:21 2011] Warning, changing simple spatial fit ID from 53 to 3
[Mon Nov 28 04:04:21 2011] 2483.927000 total counts/ 889.907000 bgd. counts: snr = 53.434464
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.377600 pixels
  Position = (271.9, 201.1) = 5 34 35.94 21 55 12.9
  Extent = 19.6 (18.9-20.2)", rotation angle = 0
  Source counts = 1594.0 +/- 49.8
  Background counts = 889.9
  Rate = 0.2 +/- 0.006
[Mon Nov 28 04:04:22 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 04:04:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 04:04:22 2011] Assessing source extent using major axis lower bound
[Mon Nov 28 04:04:22 2011] Source does appear to be extended
[Mon Nov 28 04:04:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 09:43:35 2011] Counts = 1594.020000, rescaling region sizes by 2.000000
[Mon Nov 28 09:43:35 2011] XMMSAS src. selection expression = ellipse(23604.342000, 17450.997920, 2352.108068, 2352.108068, 0.000000, X, Y)
[Mon Nov 28 09:43:35 2011] Writing source region out to fullrun_mos2_xmm0611181201_pi300-10000_pass1_cl_src20_src.reg
[Mon Nov 28 09:43:35 2011] Extracting stamp from image fullrun_mos2_xmm0611181201_pi300-10000_cl_sm2.00.img.gz, (137, 66) - (407, 336)
[Mon Nov 28 09:43:35 2011] XMMSAS bgd. selection expression = annulus(23604.342000, 17450.997920, 7840.360226, 15680.720451, X, Y) && !ellipse(25213.498800, 17650.390000, 1641.784047, 1641.784047, 0.000000, X, Y) && !ellipse(24406.990784, 14392.268066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24450.952759, 16037.600342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22791.131989, 32397.904144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25181.407074, 16746.681671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24651.027802, 15263.846481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.888000, 16797.758600, 424.255212, 424.255212, 0.000000, X, Y) && !ellipse(24463.284000, 31517.947400, 1224.896035, 1224.896035, 0.000000, X, Y) && !ellipse(26321.016160, 31674.700000, 1455.800042, 1455.800042, 0.000000, X, Y) && !ellipse(24398.210602, 13853.601120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23970.516200, 16716.636000, 540.902416, 540.902416, 0.000000, X, Y) && !ellipse(23830.759155, 31529.332550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24393.089050, 13347.296326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23279.917600, 17523.611860, 1484.568043, 1484.568043, 0.000000, X, Y) && !ellipse(23254.927800, 31602.828400, 1393.216040, 1393.216040, 0.000000, X, Y) && !ellipse(24343.084229, 12391.399490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24239.004425, 9955.589989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25654.764000, 33086.636400, 1228.560035, 1228.560035, 0.000000, X, Y) && !ellipse(24220.254608, 10820.110672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24315.986800, 9598.248000, 2125.216061, 2125.216061, 0.000000, X, Y) && !ellipse(24628.929993, 32335.614502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20328.122000, 31716.462600, 1548.696045, 1548.696045, 0.000000, X, Y) && !ellipse(24456.376000, 11593.936000, 967.168028, 967.168028, 0.000000, X, Y) && !ellipse(24063.549469, 9000.676842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18131.466629, 28851.732849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31685.176000, 25069.476000, 1465.688042, 1465.688042, 0.000000, X, Y) && !ellipse(31600.042800, 23135.310000, 1451.008042, 1451.008042, 0.000000, X, Y) && !ellipse(32345.939911, 23042.236694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17913.597580, 25268.884979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24526.618000, 11439.082000, 1582.200046, 1582.200046, 0.000000, X, Y) && !ellipse(26309.542297, 32311.788269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22160.182861, 32482.079193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23386.429382, 32678.686768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23943.658966, 15387.061081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31831.294342, 26047.013000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31517.821400, 19978.984000, 1538.888044, 1538.888044, 0.000000, X, Y) && !ellipse(23970.485382, 12663.461670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28125.354004, 31369.356415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22051.115600, 31649.897600, 1484.680043, 1484.680043, 0.000000, X, Y) && !ellipse(32374.996552, 23606.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23903.921143, 16136.411240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31320.296783, 22315.310913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24158.315430, 8043.976860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23994.962097, 14576.383728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23497.722000, 12080.704000, 1198.328034, 1198.328034, 0.000000, X, Y) && !ellipse(23874.256500, 13519.413910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31493.099365, 26745.646790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25685.002411, 33530.481232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17732.402451, 26652.147278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23674.466200, 32696.444000, 2483.272071, 310.408809, 6.032330, X, Y) && !ellipse(32353.360718, 24672.615845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32983.170000, 22344.442000, 1498.112043, 1498.112043, 0.000000, X, Y) && !ellipse(23526.846000, 11414.238000, 1963.968057, 1963.968057, 0.000000, X, Y) && !ellipse(25363.125244, 15702.286072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.610000, 32808.630000, 1455.800042, 424.165612, 2.117080, X, Y) && !ellipse(21365.200000, 31686.554600, 1506.728043, 1506.728043, 0.000000, X, Y) && !ellipse(28066.882294, 31951.567169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26795.938000, 32952.066000, 1508.488043, 1508.488043, 0.000000, X, Y) && !ellipse(24721.802917, 10125.049225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23742.790070, 8484.677872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17497.769547, 23535.902222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32376.029358, 27973.080109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23619.012604, 9774.372955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32521.734711, 20318.574890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22540.612000, 32863.940000, 1508.312043, 1508.312043, 0.000000, X, Y) && !ellipse(21936.010000, 32790.252000, 1532.872044, 1532.872044, 0.000000, X, Y) && !ellipse(28408.637720, 32924.918000, 507.091215, 507.091215, 0.000000, X, Y) && !ellipse(18084.646515, 24741.803253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24966.283325, 10997.509773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17793.762833, 16958.668503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25625.701000, 33915.514000, 1035.680030, 1035.680030, 0.000000, X, Y) && !ellipse(16939.018631, 23653.023529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17480.706800, 21352.312000, 1685.767861, 1685.767861, 0.000000, X, Y) && !ellipse(31317.177124, 21372.569748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28256.934000, 31292.378000, 1420.056041, 1420.056041, 0.000000, X, Y) && !ellipse(23612.882400, 33546.599200, 1566.792045, 916.480026, 356.828000, X, Y) && !ellipse(29299.268000, 31264.749400, 1437.312041, 1437.312041, 0.000000, X, Y) && !ellipse(23346.115417, 7866.250526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18166.536911, 28052.022095, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 09:43:35 2011] Writing fullrun_mos2_xmm0611181201_pi300-10000_pass1_cl_src20.gif
[Mon Nov 28 11:37:09 2011] Mean detx,y = (-402.27, 7684.05) 
[Mon Nov 28 11:37:13 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 11:49:18 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 11:49:18 2011] Setting source spectrum file to fullrun_mos2_xmm0611181201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Nov 28 11:49:18 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611181201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Nov 28 17:13:13 2011] Updating aperture counts using extracted products
[Mon Nov 28 17:13:13 2011] Error reading totcts from fullrun_mos2_xmm0611181201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Nov 28 17:13:19 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 17:13:19 2011] Using photon index=1.80, rate=0.195, arf fullrun_mos2_xmm0611181201_pi300-10000_pass1_cl_src20.arf
[Mon Nov 28 17:13:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 17:13:19 2011] Updating source flux to 3.2e-12
[Mon Nov 28 17:23:35 2011] Flag c found in src. 20 procflags, skipping spectral fitting