[Sat Nov 26 10:17:01 2011] Detection parameters:
  Position = (283.2, 90.2) = 5 34 32.41 21 47 10.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.0 +/- 19.7
  Background counts = 57.8
  Rate = 0.02 +/- 0.002

[Sat Nov 26 10:17:03 2011] Off-axis axis estimate = 15.14'
[Sat Nov 26 10:22:32 2011] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 10:22:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Nov 26 10:22:32 2011] Initial guess for spatial extent in simple fitting = 14.00"
[Sat Nov 26 10:22:32 2011] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.158
[Sat Nov 26 10:22:32 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 14.00"
[Sat Nov 26 17:43:39 2011] fullrun_mos1_xmm0611181201_pi300-10000_cl_pass0_src27.ximg exists
[Sat Nov 26 17:43:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181201_pi300-10000_cl_pass0_src27.csv
[Sat Nov 26 17:43:39 2011] fullrun_mos1_xmm0611181201_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Nov 26 17:43:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181201_pi300-10000_cl_pass0_src27.csv
[Sat Nov 26 17:43:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 17:43:42 2011] fullrun_mos1_xmm0611181201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Nov 26 17:43:42 2011] fullrun_mos1_xmm0611181201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Nov 26 17:43:42 2011] Fit fullrun_mos1_xmm0611181201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun Nov 27 04:52:42 2011] Warning, spatial fit 27 centroid is now closest to src. 73
[Sun Nov 27 04:52:42 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 04:52:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 04:52:42 2011] Assessing source extent using major
[Sun Nov 27 04:52:42 2011] Source does appear to be extended
[Sun Nov 27 04:52:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 04:52:42 2011] Source is confused with source 39
[Sun Nov 27 04:52:42 2011] Source is confused with source 73
[Sun Nov 27 04:53:45 2011] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 04:53:45 2011] Initial guess for spatial extent in simple fitting = 14.00"
[Sun Nov 27 04:53:45 2011] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.158
[Sun Nov 27 04:53:45 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 14.00"
[Sun Nov 27 13:57:52 2011] fullrun_mos1_xmm0611181201_pi300-10000_cl_pass1_src25.ximg exists
[Sun Nov 27 13:57:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181201_pi300-10000_cl_pass1_src25.csv
[Sun Nov 27 13:57:52 2011] fullrun_mos1_xmm0611181201_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Nov 27 13:57:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181201_pi300-10000_cl_pass1_src25.csv
[Sun Nov 27 13:57:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 13:57:54 2011] fullrun_mos1_xmm0611181201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Nov 27 13:57:54 2011] fullrun_mos1_xmm0611181201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Nov 27 13:57:54 2011] Fit fullrun_mos1_xmm0611181201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Mon Nov 28 04:03:44 2011] Source 34 is offset by -1.918538 and 0.343897 pixels which is larger than
2 X fitted extent = 1.608855 x 1.608855, not incorporating fit results
[Mon Nov 28 04:03:45 2011] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 14.348845 pixels away
[Mon Nov 28 04:03:45 2011] Vigneting correction estimate = 1.000000
[Mon Nov 28 04:03:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Nov 28 04:03:45 2011] Assessing source extent using major
[Mon Nov 28 04:03:45 2011] Source does appear to be extended
[Mon Nov 28 04:03:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Nov 28 04:04:59 2011] XMMSAS src. selection expression = ellipse(24586.229156, 7799.846252, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Nov 28 04:04:59 2011] Writing source region out to fullrun_mos1_xmm0611181201_pi300-10000_pass1_cl_src34_src.reg
[Mon Nov 28 04:04:59 2011] Extracting stamp from image fullrun_mos1_xmm0611181201_pi300-10000_cl_sm2.00.img.gz, (246, 53) - (321, 128)
[Mon Nov 28 04:04:59 2011] XMMSAS bgd. selection expression = annulus(24586.229156, 7799.846252, 1087.500000, 2175.000000, X, Y) && !ellipse(24920.752000, 11080.364000, 1591.160046, 1591.160046, 0.000000, X, Y) && !ellipse(23964.089400, 10341.651000, 669.355219, 669.355219, 0.000000, X, Y) && !ellipse(24048.594000, 9908.936000, 2149.512062, 2149.512062, 0.000000, X, Y) && !ellipse(24055.522800, 9164.402000, 2793.288080, 2793.288080, 0.000000, X, Y) && !ellipse(24227.484253, 8575.688957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23717.875275, 10825.331787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24055.199402, 7780.166512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24555.685699, 10209.545532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24731.730072, 8206.692322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23579.457977, 7802.049263, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Nov 28 04:04:59 2011] Writing fullrun_mos1_xmm0611181201_pi300-10000_pass1_cl_src34.gif
[Mon Nov 28 05:46:36 2011] Mean detx,y = (16646.61, -878.80) 
[Mon Nov 28 05:46:41 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Nov 28 05:47:06 2011] Binned source spectrum to 10 counts/bin
[Mon Nov 28 05:47:06 2011] Setting source spectrum file to fullrun_mos1_xmm0611181201_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon Nov 28 05:47:06 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0611181201_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Mon Nov 28 08:30:38 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Nov 28 08:30:38 2011] rmf not generated due to insufficient counts
[Mon Nov 28 17:13:03 2011] Updating aperture counts using extracted products
[Mon Nov 28 17:13:03 2011] Error reading totcts from fullrun_mos1_xmm0611181201_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon Nov 28 17:13:07 2011] Calculating source flux in energy range 0.30-8.00
[Mon Nov 28 17:13:07 2011] Using photon index=1.80, rate=0.0174, arf fullrun_mos1_xmm0611181201_pi300-10000_pass1_cl_src34.arf
[Mon Nov 28 17:13:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Nov 28 17:13:08 2011] Updating source flux to 6e-13
[Mon Nov 28 17:13:24 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting