[Mon Mar 26 20:18:06 2012] Detection parameters:
  Position = (400.8, 294.0) = 5 34 4.38 21 59 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.6 +/- 24.2
  Background counts = 191.7
  Rate = 0.03 +/- 0.005

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 7.43'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 10.14"
[Tue Mar 27 05:17:27 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.122
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 10.14"
[Tue Mar 27 16:18:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src58.ximg exists
[Tue Mar 27 16:18:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src58.csv
[Tue Mar 27 16:18:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src58_1.ximg exists
[Tue Mar 27 16:18:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src58.csv
[Tue Mar 27 16:18:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:11 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Tue Mar 27 16:18:11 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Tue Mar 27 16:18:11 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Tue Mar 27 16:19:17 2012] Spatial fit model total counts = 1690.750000, observed total counts = 1812.000000
[Tue Mar 27 16:19:17 2012] Offset between fit and detection position for source 82 = 3.336309 pixels
[Tue Mar 27 16:19:17 2012] Warning, changing simple spatial fit ID from 58 to 27
Spatial fit parameters:
  Offset between fit and detection position for source 82 = 3.336309 pixels
  Position = (398.1, 292.1) = 5 34 5.24 21 59 0.0
  Extent = 19.8" x 19.8", rotation angle = 254
  Source counts = 0.0 +/- 0.0
  Background counts = 0.0
  Rate = 3e-09 +/- 7e-07
 Deleting source due to low signal-to-noise ratio