[Mon Mar 26 20:18:06 2012] Detection parameters:
  Position = (406.1, 312.1) = 5 34 2.74 22 0 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.4 +/- 22.3
  Background counts = 163.0
  Rate = 0.03 +/- 0.005

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 7.87'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Tue Mar 27 05:17:27 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.084
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 10.36"
[Tue Mar 27 16:18:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src60.ximg exists
[Tue Mar 27 16:18:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src60.csv
[Tue Mar 27 16:18:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src60_1.ximg exists
[Tue Mar 27 16:18:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src60.csv
[Tue Mar 27 16:18:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:11 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Tue Mar 27 16:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src60.csv
[Tue Mar 27 16:18:11 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Tue Mar 27 16:18:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src60.csv
[Tue Mar 27 16:18:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:19:17 2012] Warning, spatial fit 60 centroid is now closest to src. 66
[Tue Mar 27 16:19:17 2012] Warning: source 64 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 73 at 10.611811 pixels away
[Tue Mar 27 16:19:17 2012] Spatial fit model total counts = 2611.280000, observed total counts = 2611.000000
[Tue Mar 27 16:19:17 2012] Offset between fit and detection position for source 73 = 2.725157 pixels
[Tue Mar 27 16:19:17 2012] Warning, changing simple spatial fit ID from 60 to 77
[Tue Mar 27 16:19:17 2012] 2552.625400 total counts/ 2514.710000 bgd. counts: snr = 0.756087
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 2.725157 pixels
  Position = (405.2, 309.5) = 5 34 3.03 22 0 15.8
  Extent = 7.9 (4.3-17.3)", rotation angle = 0
  Source counts = 37.9 +/- 50.5
  Background counts = 2514.7
  Rate = 0.006 +/- 0.008
  Deleting source due to low Poisson probability