[Mon Mar 26 20:18:05 2012] Detection parameters:
  Position = (398.1, 323.5) = 5 34 5.22 22 1 8.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 198.5 +/- 23.4
  Background counts = 144.5
  Rate = 0.05 +/- 0.006

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 7.45'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 10.15"
[Tue Mar 27 05:17:27 2012] source mask rpix=2.3, npix_max = 32, mask sum = 27, frac = 0.840
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.15"
[Tue Mar 27 16:18:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src31.ximg exists
[Tue Mar 27 16:18:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src31.csv
[Tue Mar 27 16:18:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Mar 27 16:18:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src31.csv
[Tue Mar 27 16:18:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:10 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Mar 27 16:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Mar 27 16:18:10 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Mar 27 16:18:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Mar 27 16:18:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:19:17 2012] Source 70 is offset by -3.067955 and 3.677971 pixels which is larger than
2 X fitted extent = 1.150359 x 1.150359, not incorporating fit results
[Tue Mar 27 16:19:17 2012] Warning, spatial fit 31 centroid is now closest to src. 69
[Tue Mar 27 16:19:17 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:19:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:19:17 2012] Assessing source extent using major
[Tue Mar 27 16:19:17 2012] Source does appear to be extended
[Tue Mar 27 16:19:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:19:17 2012] Source is confused with source 69
[Wed Mar 28 00:11:55 2012] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:11:55 2012] Initial guess for spatial extent in simple fitting = 10.15"
[Wed Mar 28 00:11:55 2012] source mask rpix=2.3, npix_max = 32, mask sum = 27, frac = 0.840
[Wed Mar 28 00:11:55 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 10.15"
[Wed Mar 28 11:27:06 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src28.ximg exists
[Wed Mar 28 11:27:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src28.csv
[Wed Mar 28 11:27:06 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Mar 28 11:27:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src28.csv
[Wed Mar 28 11:27:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Mar 28 11:27:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src28.csv
[Wed Mar 28 11:27:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Mar 28 11:27:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src28.csv
[Wed Mar 28 11:27:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:28:14 2012] Source 70 is offset by -3.960231 and 3.379948 pixels which is larger than
2 X fitted extent = 1.136897 x 1.136897, not incorporating fit results
[Wed Mar 28 11:28:14 2012] Warning, spatial fit 28 centroid is now closest to src. 69
[Wed Mar 28 11:28:14 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:28:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:28:14 2012] Assessing source extent using major
[Wed Mar 28 11:28:14 2012] Source does appear to be extended
[Wed Mar 28 11:28:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 13:48:11 2012] XMMSAS src. selection expression = ellipse(34589.237885, 28093.833496, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 13:48:11 2012] Writing source region out to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src70_src.reg
[Wed Mar 28 13:48:11 2012] Extracting stamp from image fullrun_mos2_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (361, 286) - (436, 361)
[Wed Mar 28 13:48:11 2012] XMMSAS bgd. selection expression = annulus(34589.237885, 28093.833496, 1087.500000, 2175.000000, X, Y) && !ellipse(34202.915192, 28923.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33871.957825, 25784.701416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34111.935303, 28489.008057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34077.865967, 26471.984955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34141.846863, 30213.922180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34163.426941, 26927.627808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34186.825714, 27299.732819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35188.492000, 29370.480000, 1649.576047, 1649.576047, 0.000000, X, Y) && !ellipse(34186.833679, 25101.716370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34936.579437, 26648.998413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34834.644897, 28918.525421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35204.296661, 28407.095093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34708.947845, 26143.332153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35682.730286, 30225.835297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35325.769562, 25958.823547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34111.898132, 31085.894867, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 13:48:11 2012] Writing fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src70.gif
[Wed Mar 28 14:13:43 2012] Mean detx,y = (-7322.46, 1058.37) 
[Wed Mar 28 14:13:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 14:13:59 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 14:13:59 2012] Setting source spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Wed Mar 28 14:13:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Wed Mar 28 15:38:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 15:38:56 2012] rmf not generated due to insufficient counts
[Wed Mar 28 16:37:36 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:36 2012] Error reading totcts from fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Wed Mar 28 16:37:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:41 2012] Using photon index=1.80, rate=0.0496, arf fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src70.arf
[Wed Mar 28 16:37:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:41 2012] Updating source flux to 8.7e-13
[Wed Mar 28 16:44:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting