[Mon Mar 26 20:18:05 2012] Detection parameters:
  Position = (400.3, 339.0) = 5 34 4.54 22 2 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.5 +/- 19.9
  Background counts = 128.4
  Rate = 0.04 +/- 0.005

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 7.95'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Tue Mar 27 05:17:27 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.897
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 10.40"
[Tue Mar 27 16:18:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src38.ximg exists
[Tue Mar 27 16:18:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src38_1.ximg exists
[Tue Mar 27 16:18:08 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src38 appears to have run properly
[Tue Mar 27 16:18:10 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Tue Mar 27 16:18:10 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Tue Mar 27 16:18:10 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Tue Mar 27 16:19:17 2012] Warning, spatial fit 38 centroid is now closest to src. 64
[Tue Mar 27 16:19:17 2012] Spatial fit model total counts = 2455.000000, observed total counts = 2462.000000
[Tue Mar 27 16:19:17 2012] Offset between fit and detection position for source 61 = 4.803756 pixels
[Tue Mar 27 16:19:17 2012] Warning, changing simple spatial fit ID from 38 to 56
[Tue Mar 27 16:19:17 2012] 2186.868000 total counts/ 1803.440000 bgd. counts: snr = 9.028861
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 4.803756 pixels
  Position = (405.0, 338.1) = 5 34 3.06 22 2 20.3
  Extent = 20.6 (20.5-20.7)", rotation angle = 0
  Source counts = 383.4 +/- 46.8
  Background counts = 1803.4
  Rate = 0.06 +/- 0.007
[Tue Mar 27 16:19:17 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:19:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:19:17 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 16:19:17 2012] Source does appear to be extended
[Tue Mar 27 16:19:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:19:17 2012] Source is confused with source 64
[Wed Mar 28 00:11:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:11:55 2012] Initial guess for spatial extent in simple fitting = 20.62"
[Wed Mar 28 00:11:55 2012] source mask rpix=4.7, npix_max = 109, mask sum = 97, frac = 0.883
[Wed Mar 28 00:11:55 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 20.62"
[Wed Mar 28 11:27:06 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src35.ximg exists
[Wed Mar 28 11:27:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src35.csv
[Wed Mar 28 11:27:06 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src35_1.ximg exists
[Wed Mar 28 11:27:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src35.csv
[Wed Mar 28 11:27:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:10 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Wed Mar 28 11:27:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src35.csv
[Wed Mar 28 11:27:10 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Wed Mar 28 11:27:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src35.csv
[Wed Mar 28 11:27:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:28:14 2012] Source 61 is offset by 2.233586 and -4.640115 pixels which is larger than
2 X fitted extent = 1.161163 x 1.161163, not incorporating fit results
[Wed Mar 28 11:28:14 2012] Warning, spatial fit 35 centroid is now closest to src. 56
[Wed Mar 28 11:28:14 2012] Source 61 is offset by 2.867931 and 1.915494 pixels which is larger than
2 X fitted extent = 1.029214 x 1.029214, not incorporating fit results
[Wed Mar 28 11:28:14 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:28:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:28:14 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 11:28:14 2012] Source does appear to be extended
[Wed Mar 28 11:28:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 13:48:12 2012] XMMSAS src. selection expression = ellipse(35188.492000, 29370.480000, 1237.182036, 1237.182036, 0.000000, X, Y)
[Wed Mar 28 13:48:12 2012] Writing source region out to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src61_src.reg
[Wed Mar 28 13:48:12 2012] Extracting stamp from image fullrun_mos2_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (334, 267) - (476, 409)
[Wed Mar 28 13:48:12 2012] XMMSAS bgd. selection expression = annulus(35188.492000, 29370.480000, 2061.970059, 4123.940119, X, Y) && !ellipse(30054.339400, 34268.390400, 1652.224048, 1652.224048, 0.000000, X, Y) && !ellipse(31190.454000, 34185.181200, 1693.416049, 310.783209, 1.709000, X, Y) && !ellipse(34202.915192, 28923.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33871.957825, 25784.701416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34111.935303, 28489.008057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34077.865967, 26471.984955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34141.846863, 30213.922180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34163.426941, 26927.627808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33789.104980, 24466.264313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34186.825714, 27299.732819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34589.237885, 28093.833496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34186.833679, 25101.716370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34750.212311, 31953.030090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34936.579437, 26648.998413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34834.644897, 28918.525421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35204.296661, 28407.095093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34708.947845, 26143.332153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35682.730286, 30225.835297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30843.449620, 34131.121800, 1675.808048, 1675.808048, 0.000000, X, Y) && !ellipse(35325.769562, 25958.823547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34012.013275, 32060.553467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34111.898132, 31085.894867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.000000, 31578.296600, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 13:48:12 2012] Writing fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src61.gif
[Wed Mar 28 14:18:04 2012] Mean detx,y = (-7766.10, 2253.43) 
[Wed Mar 28 14:18:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 14:18:34 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 14:18:34 2012] Setting source spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Wed Mar 28 14:18:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Wed Mar 28 16:37:36 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:36 2012] Error reading totcts from fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Wed Mar 28 16:37:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:41 2012] Using photon index=1.80, rate=0.0606, arf fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src61.arf
[Wed Mar 28 16:37:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:41 2012] Updating source flux to 9.8e-13
[Wed Mar 28 16:44:56 2012] Flag b found in src. 61 procflags, skipping spectral fitting
[Wed Mar 28 16:44:56 2012] Flag c found in src. 61 procflags, skipping spectral fitting