[Mon Mar 26 20:18:05 2012] Detection parameters:
  Position = (392.6, 357.9) = 5 34 6.93 22 3 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.3 +/- 17.3
  Background counts = 117.0
  Rate = 0.02 +/- 0.003

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 8.08'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Tue Mar 27 05:17:27 2012] source mask rpix=2.4, npix_max = 33, mask sum = 18, frac = 0.533
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 82 for pass 0, mean size = 10.47"
[Tue Mar 27 16:18:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src82.ximg exists
[Tue Mar 27 16:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src82.csv
[Tue Mar 27 16:18:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src82_1.ximg exists
[Tue Mar 27 16:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src82.csv
[Tue Mar 27 16:18:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:12 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Tue Mar 27 16:18:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src82.csv
[Tue Mar 27 16:18:12 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Tue Mar 27 16:18:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src82.csv
[Tue Mar 27 16:18:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:19:17 2012] Warning, spatial fit 82 centroid is now closest to src. 3
[Tue Mar 27 16:19:17 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:19:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:19:17 2012] Assessing source extent using major
[Tue Mar 27 16:19:17 2012] Source does appear to be extended
[Tue Mar 27 16:19:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:19:17 2012] Source is confused with source 53
[Wed Mar 28 00:11:55 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:11:55 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Wed Mar 28 00:11:55 2012] source mask rpix=2.4, npix_max = 33, mask sum = 18, frac = 0.533
[Wed Mar 28 00:11:55 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 10.47"
[Wed Mar 28 11:27:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src71.ximg exists
[Wed Mar 28 11:27:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src71.csv
[Wed Mar 28 11:27:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src71_1.ximg exists
[Wed Mar 28 11:27:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src71.csv
[Wed Mar 28 11:27:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:11 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Wed Mar 28 11:27:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src71.csv
[Wed Mar 28 11:27:11 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Wed Mar 28 11:27:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src71.csv
[Wed Mar 28 11:27:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:28:14 2012] Source 56 is offset by 8.743404 and 0.771458 pixels which is larger than
2 X fitted extent = 1.136897 x 1.136897, not incorporating fit results
[Wed Mar 28 11:28:14 2012] Source 56 is offset by -6.437585 and 0.460010 pixels which is larger than
2 X fitted extent = 2.370529 x 2.370529, not incorporating fit results
[Wed Mar 28 11:28:14 2012] Source 56 is offset by 2.488659 and -1.285749 pixels which is larger than
2 X fitted extent = 1.263637 x 1.263637, not incorporating fit results
[Wed Mar 28 11:28:14 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:28:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:28:14 2012] Assessing source extent using major
[Wed Mar 28 11:28:14 2012] Source does appear to be extended
[Wed Mar 28 11:28:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 13:48:14 2012] XMMSAS src. selection expression = ellipse(34111.898132, 31085.894867, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 13:48:14 2012] Writing source region out to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src56_src.reg
[Wed Mar 28 13:48:14 2012] Extracting stamp from image fullrun_mos2_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (355, 320) - (430, 395)
[Wed Mar 28 13:48:14 2012] XMMSAS bgd. selection expression = annulus(34111.898132, 31085.894867, 1087.500000, 2175.000000, X, Y) && !ellipse(31190.454000, 34185.181200, 1693.416049, 310.783209, 1.709000, X, Y) && !ellipse(34202.915192, 28923.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34111.935303, 28489.008057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34141.846863, 30213.922180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34589.237885, 28093.833496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35188.492000, 29370.480000, 1649.576047, 1649.576047, 0.000000, X, Y) && !ellipse(34750.212311, 31953.030090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34834.644897, 28918.525421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35204.296661, 28407.095093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35682.730286, 30225.835297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30843.449620, 34131.121800, 1675.808048, 1675.808048, 0.000000, X, Y) && !ellipse(34012.013275, 32060.553467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.000000, 31578.296600, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 13:48:14 2012] Writing fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src56.gif
[Wed Mar 28 14:37:25 2012] Mean detx,y = (-6961.48, 3972.90) 
[Wed Mar 28 14:37:26 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 14:37:40 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 14:37:40 2012] Setting source spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Wed Mar 28 14:37:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Wed Mar 28 16:25:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 16:25:41 2012] rmf not generated due to insufficient counts
[Wed Mar 28 16:37:39 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:39 2012] Error reading totcts from fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Wed Mar 28 16:37:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:44 2012] Using photon index=1.80, rate=0.0215, arf fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src56.arf
[Wed Mar 28 16:37:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:44 2012] Updating source flux to 6.3e-13
[Wed Mar 28 16:44:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting