[Mon Mar 26 20:18:05 2012] Detection parameters:
  Position = (403.0, 363.0) = 5 34 3.69 22 4 3.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.2 +/- 20.3
  Background counts = 117.4
  Rate = 0.03 +/- 0.005

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 8.91'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Tue Mar 27 05:17:27 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.999
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 10.88"
[Tue Mar 27 16:18:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src63.ximg exists
[Tue Mar 27 16:18:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src63.csv
[Tue Mar 27 16:18:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src63_1.ximg exists
[Tue Mar 27 16:18:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src63.csv
[Tue Mar 27 16:18:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:11 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Tue Mar 27 16:18:11 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Tue Mar 27 16:18:11 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Tue Mar 27 16:19:17 2012] Spatial fit model total counts = 1849.610000, observed total counts = 1754.000000
[Tue Mar 27 16:19:17 2012] Offset between fit and detection position for source 54 = 1.016445 pixels
[Tue Mar 27 16:19:17 2012] Warning, changing simple spatial fit ID from 63 to 46
[Tue Mar 27 16:19:17 2012] 1829.122000 total counts/ 1813.940000 bgd. counts: snr = 0.356466
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 1.016445 pixels
  Position = (402.5, 362.1) = 5 34 3.85 22 4 4.5
  Extent = 2.7 (2.7-3.4)", rotation angle = 0
  Source counts = 15.2 +/- 42.8
  Background counts = 1813.9
  Rate = 0.002 +/- 0.007
  Deleting source due to low Poisson probability