[Mon Mar 26 20:18:02 2012] Detection parameters:
  Position = (325.8, 475.0) = 5 34 27.84 22 12 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 369.7 +/- 27.9
  Background counts = 64.3
  Rate = 0.06 +/- 0.004

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 12.95'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 12.90 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 12.90"
[Tue Mar 27 05:17:27 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.874
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 12.90"
[Tue Mar 27 16:18:07 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src19.ximg exists
[Tue Mar 27 16:18:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src19.csv
[Tue Mar 27 16:18:07 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Mar 27 16:18:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src19.csv
[Tue Mar 27 16:18:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:10 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Mar 27 16:18:10 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Mar 27 16:18:10 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Mar 27 16:19:17 2012] Source 4 is offset by -8.080745 and 2.095219 pixels which is larger than
2 X fitted extent = 1.423398 x 1.423398, not incorporating fit results
[Tue Mar 27 16:19:17 2012] Warning, spatial fit 19 centroid is now closest to src. 30
[Tue Mar 27 16:19:17 2012] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.251744 pixels away
[Tue Mar 27 16:19:17 2012] Source 4 is offset by -2.095251 and 1.080713 pixels which is larger than
2 X fitted extent = 1.425209 x 1.425209, not incorporating fit results
[Tue Mar 27 16:19:17 2012] Source 4 is offset by -4.252102 and 0.129679 pixels which is larger than
2 X fitted extent = 1.539255 x 1.539255, not incorporating fit results
[Tue Mar 27 16:19:17 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:19:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:19:17 2012] Assessing source extent using major
[Tue Mar 27 16:19:17 2012] Source does appear to be extended
[Tue Mar 27 16:19:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 00:11:55 2012] Using EEF radius (= 12.90 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:11:55 2012] Initial guess for spatial extent in simple fitting = 12.90"
[Wed Mar 28 00:11:55 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.874
[Wed Mar 28 00:11:55 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 12.90"
[Wed Mar 28 11:27:05 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src17.ximg exists
[Wed Mar 28 11:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src17.csv
[Wed Mar 28 11:27:05 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Mar 28 11:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src17.csv
[Wed Mar 28 11:27:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Mar 28 11:27:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Mar 28 11:27:09 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Mar 28 11:28:14 2012] Source 4 is offset by -8.080745 and 2.095219 pixels which is larger than
2 X fitted extent = 1.423398 x 1.423398, not incorporating fit results
[Wed Mar 28 11:28:14 2012] Warning, spatial fit 17 centroid is now closest to src. 29
[Wed Mar 28 11:28:14 2012] Spatial fit model total counts = 2350.590000, observed total counts = 2328.000000
[Wed Mar 28 11:28:14 2012] Offset between fit and detection position for source 4 = 0.748271 pixels
[Wed Mar 28 11:28:14 2012] Warning, changing simple spatial fit ID from 17 to 36
[Wed Mar 28 11:28:14 2012] 1809.978000 total counts/ 1634.250000 bgd. counts: snr = 4.346921
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.748271 pixels
  Position = (326.5, 474.7) = 5 34 27.62 22 12 14.4
  Extent = 9.7 (5.4-18.5)", rotation angle = 0
  Source counts = 175.7 +/- 42.5
  Background counts = 1634.2
  Rate = 0.03 +/- 0.007
[Wed Mar 28 11:28:14 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:28:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:28:14 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 11:28:14 2012] Source does appear to be extended
[Wed Mar 28 11:28:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 11:28:14 2012] Source is confused with source 6
[Wed Mar 28 11:28:14 2012] Source is confused with source 28
[Wed Mar 28 13:48:11 2012] XMMSAS src. selection expression = ellipse(28356.026000, 41248.256000, 582.860417, 582.860417, 0.000000, X, Y)
[Wed Mar 28 13:48:11 2012] Writing source region out to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src4_src.reg
[Wed Mar 28 13:48:11 2012] Extracting stamp from image fullrun_mos2_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (293, 441) - (360, 508)
[Wed Mar 28 13:48:11 2012] XMMSAS bgd. selection expression = annulus(28356.026000, 41248.256000, 971.434028, 1942.868056, X, Y) && !ellipse(27975.485565, 39017.232025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28023.183167, 40648.670532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28381.270000, 42333.439000, 1619.984047, 1619.984047, 0.000000, X, Y) && !ellipse(27394.278412, 39530.220856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27991.338745, 43190.954010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27513.154694, 40155.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28380.236816, 44015.515839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27596.235870, 40743.001068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28498.308624, 40411.751648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28711.549957, 42315.898834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28008.994690, 43873.607178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27945.375000, 41938.064000, 2152.160062, 2152.160062, 0.000000, X, Y) && !ellipse(29065.829102, 39100.464539, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 13:48:11 2012] Writing fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src4.gif
[Wed Mar 28 14:08:08 2012] Mean detx,y = (-420.60, 13836.30) 
[Wed Mar 28 14:08:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 14:08:24 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 14:08:25 2012] Setting source spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 28 14:08:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Mar 28 16:37:35 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:35 2012] Error reading totcts from fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 28 16:37:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:40 2012] Using photon index=1.80, rate=0.0278, arf fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src4.arf
[Wed Mar 28 16:37:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:40 2012] Updating source flux to 9.1e-13
[Wed Mar 28 16:44:56 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Wed Mar 28 16:44:56 2012] Flag c found in src. 4 procflags, skipping spectral fitting