[Mon Mar 26 20:18:04 2012] Detection parameters:
  Position = (334.6, 450.0) = 5 34 25.07 22 10 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.5 +/- 17.9
  Background counts = 85.1
  Rate = 0.01 +/- 0.003

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 11.30'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 12.08"
[Tue Mar 27 05:17:27 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.978
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 93 for pass 0, mean size = 12.08"
[Tue Mar 27 16:18:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src93.ximg exists
[Tue Mar 27 16:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src93.csv
[Tue Mar 27 16:18:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src93_1.ximg exists
[Tue Mar 27 16:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src93.csv
[Tue Mar 27 16:18:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:13 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Tue Mar 27 16:18:13 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Tue Mar 27 16:18:13 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Tue Mar 27 16:19:17 2012] Source 34 is offset by 2.389783 and -3.269580 pixels which is larger than
2 X fitted extent = 1.344713 x 1.344713, not incorporating fit results
[Tue Mar 27 16:19:17 2012] Source 34 is offset by 6.081300 and 2.421937 pixels which is larger than
2 X fitted extent = 1.195770 x 1.195770, not incorporating fit results
[Tue Mar 27 16:19:17 2012] Source 34 is offset by -4.405459 and -3.958982 pixels which is larger than
2 X fitted extent = 1.444115 x 1.444115, not incorporating fit results
[Tue Mar 27 16:19:17 2012] Warning: source 93 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 11.653005 pixels away
[Tue Mar 27 16:19:17 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:19:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:19:17 2012] Assessing source extent using major
[Tue Mar 27 16:19:17 2012] Source does appear to be extended
[Tue Mar 27 16:19:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 00:11:55 2012] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:11:55 2012] Initial guess for spatial extent in simple fitting = 12.08"
[Wed Mar 28 00:11:55 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.978
[Wed Mar 28 00:11:55 2012] Giving source the simple spatial ID 81 for pass 1, mean size = 12.08"
[Wed Mar 28 11:27:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src81.ximg exists
[Wed Mar 28 11:27:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src81.csv
[Wed Mar 28 11:27:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src81_1.ximg exists
[Wed Mar 28 11:27:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src81.csv
[Wed Mar 28 11:27:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:11 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Wed Mar 28 11:27:11 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Wed Mar 28 11:27:11 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src81 appears to have run properly
[Wed Mar 28 11:28:14 2012] Source 34 is offset by 2.389783 and -3.269580 pixels which is larger than
2 X fitted extent = 1.344713 x 1.344713, not incorporating fit results
[Wed Mar 28 11:28:14 2012] Warning: source 81 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 11.654104 pixels away
[Wed Mar 28 11:28:14 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:28:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:28:14 2012] Assessing source extent using major
[Wed Mar 28 11:28:14 2012] Source does appear to be extended
[Wed Mar 28 11:28:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 13:48:14 2012] XMMSAS src. selection expression = ellipse(29065.829102, 39100.464539, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 13:48:14 2012] Writing source region out to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src34_src.reg
[Wed Mar 28 13:48:14 2012] Extracting stamp from image fullrun_mos2_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (297, 412) - (372, 487)
[Wed Mar 28 13:48:15 2012] XMMSAS bgd. selection expression = annulus(29065.829102, 39100.464539, 1087.500000, 2175.000000, X, Y) && !ellipse(27465.442000, 34268.640000, 3233.888093, 3233.888093, 0.000000, X, Y) && !ellipse(27804.738640, 36186.386000, 970.920028, 216.667206, 88.032000, X, Y) && !ellipse(27291.924000, 37404.944000, 585.290417, 585.290417, 0.000000, X, Y) && !ellipse(28356.026000, 41248.256000, 777.147222, 777.147222, 0.000000, X, Y) && !ellipse(27666.670000, 35933.024000, 2102.048060, 2102.048060, 0.000000, X, Y) && !ellipse(27971.213623, 38396.308289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29017.590000, 35913.088200, 1714.400049, 1714.400049, 0.000000, X, Y) && !ellipse(27975.485565, 39017.232025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28033.567800, 37480.108000, 1785.120051, 1785.120051, 0.000000, X, Y) && !ellipse(27715.558197, 37983.841522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28023.183167, 40648.670532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28381.270000, 42333.439000, 1619.984047, 1619.984047, 0.000000, X, Y) && !ellipse(27394.278412, 39530.220856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26875.052000, 36738.276000, 1735.720050, 1735.720050, 0.000000, X, Y) && !ellipse(27513.154694, 40155.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27596.235870, 40743.001068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28498.308624, 40411.751648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27945.375000, 41938.064000, 2152.160062, 2152.160062, 0.000000, X, Y)
[Wed Mar 28 13:48:15 2012] Writing fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src34.gif
[Wed Mar 28 14:44:06 2012] Mean detx,y = (-1183.40, 11689.17) 
[Wed Mar 28 14:44:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 14:44:25 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 14:44:25 2012] Setting source spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Wed Mar 28 14:44:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Wed Mar 28 16:36:58 2012] Not generating rmf since there are only 83 counts
[Wed Mar 28 16:36:58 2012] rmf not generated due to insufficient counts
[Wed Mar 28 16:37:39 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:39 2012] Error reading totcts from fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Wed Mar 28 16:37:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:44 2012] Using photon index=1.80, rate=0.0132, arf fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src34.arf
[Wed Mar 28 16:37:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:44 2012] Updating source flux to 3.5e-13
[Wed Mar 28 16:44:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting