[Mon Mar 26 20:18:03 2012] Detection parameters:
  Position = (330.6, 486.9) = 5 34 26.34 22 13 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.1 +/- 19.7
  Background counts = 62.0
  Rate = 0.02 +/- 0.003

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 13.86'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 13.36"
[Tue Mar 27 05:17:27 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.098
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 88 for pass 0, mean size = 13.36"
[Tue Mar 27 16:18:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src88.ximg exists
[Tue Mar 27 16:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src88.csv
[Tue Mar 27 16:18:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src88_1.ximg exists
[Tue Mar 27 16:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src88.csv
[Tue Mar 27 16:18:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:12 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Tue Mar 27 16:18:12 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Tue Mar 27 16:18:12 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src88 appears to have run properly
[Tue Mar 27 16:19:17 2012] Source 29 is offset by -3.038368 and 6.941964 pixels which is larger than
2 X fitted extent = 1.451710 x 1.451710, not incorporating fit results
[Tue Mar 27 16:19:17 2012] Warning: source 78 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.662262 pixels away
[Tue Mar 27 16:19:17 2012] Warning: source 88 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 16.725260 pixels away
[Tue Mar 27 16:19:17 2012] Source 29 is offset by -4.263150 and -6.214450 pixels which is larger than
2 X fitted extent = 1.604805 x 1.604805, not incorporating fit results
[Tue Mar 27 16:19:17 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:19:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:19:17 2012] Assessing source extent using major
[Tue Mar 27 16:19:17 2012] Source does appear to be extended
[Tue Mar 27 16:19:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:19:17 2012] Source is confused with source 6
[Wed Mar 28 00:11:55 2012] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:11:55 2012] Initial guess for spatial extent in simple fitting = 13.36"
[Wed Mar 28 00:11:55 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.098
[Wed Mar 28 00:11:55 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 13.36"
[Wed Mar 28 11:27:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src77.ximg exists
[Wed Mar 28 11:27:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src77.csv
[Wed Mar 28 11:27:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src77_1.ximg exists
[Wed Mar 28 11:27:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src77.csv
[Wed Mar 28 11:27:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:11 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Wed Mar 28 11:27:11 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Wed Mar 28 11:27:11 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Wed Mar 28 11:28:14 2012] Source 29 is offset by 2.835632 and -0.896450 pixels which is larger than
2 X fitted extent = 1.496823 x 1.496823, not incorporating fit results
[Wed Mar 28 11:28:14 2012] Warning, spatial fit 77 centroid is now closest to src. 6
[Wed Mar 28 11:28:14 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:28:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:28:14 2012] Assessing source extent using major
[Wed Mar 28 11:28:14 2012] Source does appear to be extended
[Wed Mar 28 11:28:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 13:48:14 2012] XMMSAS src. selection expression = ellipse(28711.549957, 42315.898834, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 13:48:14 2012] Writing source region out to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src29_src.reg
[Wed Mar 28 13:48:14 2012] Extracting stamp from image fullrun_mos2_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (293, 449) - (368, 524)
[Wed Mar 28 13:48:14 2012] XMMSAS bgd. selection expression = annulus(28711.549957, 42315.898834, 1087.500000, 2175.000000, X, Y) && !ellipse(28356.026000, 41248.256000, 777.147222, 777.147222, 0.000000, X, Y) && !ellipse(28023.183167, 40648.670532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28381.270000, 42333.439000, 1619.984047, 1619.984047, 0.000000, X, Y) && !ellipse(27394.278412, 39530.220856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27991.338745, 43190.954010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27513.154694, 40155.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28380.236816, 44015.515839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27596.235870, 40743.001068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28498.308624, 40411.751648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28008.994690, 43873.607178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27945.375000, 41938.064000, 2152.160062, 2152.160062, 0.000000, X, Y)
[Wed Mar 28 13:48:14 2012] Writing fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src29.gif
[Wed Mar 28 14:39:47 2012] Mean detx,y = (-639.01, 14892.82) 
[Wed Mar 28 14:39:49 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 14:40:07 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 14:40:07 2012] Setting source spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Mar 28 14:40:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed Mar 28 16:27:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 16:27:11 2012] rmf not generated due to insufficient counts
[Wed Mar 28 16:37:39 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:39 2012] Error reading totcts from fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Mar 28 16:37:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:44 2012] Using photon index=1.80, rate=0.0193, arf fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src29.arf
[Wed Mar 28 16:37:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:44 2012] Updating source flux to 6.9e-13
[Wed Mar 28 16:44:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting