[Mon Mar 26 20:18:03 2012] Detection parameters:
  Position = (321.4, 490.8) = 5 34 29.23 22 13 30.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.8 +/- 19.8
  Background counts = 61.3
  Rate = 0.02 +/- 0.003

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 14.04'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 13.45"
[Tue Mar 27 05:17:27 2012] source mask rpix=3.1, npix_max = 51, mask sum = 46, frac = 0.891
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 91 for pass 0, mean size = 13.45"
[Tue Mar 27 16:18:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src91.ximg exists
[Tue Mar 27 16:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src91.csv
[Tue Mar 27 16:18:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src91_1.ximg exists
[Tue Mar 27 16:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src91.csv
[Tue Mar 27 16:18:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:12 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Tue Mar 27 16:18:13 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Tue Mar 27 16:18:13 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src91 appears to have run properly
[Tue Mar 27 16:19:17 2012] Warning, spatial fit 91 centroid is now closest to src. 30
[Tue Mar 27 16:19:17 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:19:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:19:17 2012] Assessing source extent using major
[Tue Mar 27 16:19:17 2012] Source does appear to be extended
[Tue Mar 27 16:19:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:19:17 2012] Source is confused with source 6
[Wed Mar 28 00:11:55 2012] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:11:55 2012] Initial guess for spatial extent in simple fitting = 13.45"
[Wed Mar 28 00:11:55 2012] source mask rpix=3.1, npix_max = 51, mask sum = 46, frac = 0.891
[Wed Mar 28 00:11:55 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 13.45"
[Wed Mar 28 11:27:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src79.ximg exists
[Wed Mar 28 11:27:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src79.csv
[Wed Mar 28 11:27:08 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src79_1.ximg exists
[Wed Mar 28 11:27:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src79.csv
[Wed Mar 28 11:27:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:11 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Wed Mar 28 11:27:11 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Wed Mar 28 11:27:11 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Wed Mar 28 11:28:14 2012] Warning: source 78 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 12.011116 pixels away
[Wed Mar 28 11:28:14 2012] Spatial fit model total counts = 1954.400000, observed total counts = 1931.000000
[Wed Mar 28 11:28:14 2012] Offset between fit and detection position for source 28 = 8.205204 pixels
[Wed Mar 28 11:28:14 2012] 1882.256000 total counts/ 1344.840000 bgd. counts: snr = 14.654644
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 8.205204 pixels
  Position = (321.8, 482.6) = 5 34 29.10 22 12 48.9
  Extent = 26.9 (26.9-53.8)", rotation angle = 0
  Source counts = 537.4 +/- 43.4
  Background counts = 1344.8
  Rate = 0.08 +/- 0.007
[Wed Mar 28 11:28:14 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:28:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:28:14 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 11:28:14 2012] Source does appear to be extended
[Wed Mar 28 11:28:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 13:48:14 2012] XMMSAS src. selection expression = ellipse(27945.375000, 41938.064000, 1614.120046, 1614.120046, 0.000000, X, Y)
[Wed Mar 28 13:48:14 2012] Writing source region out to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src28_src.reg
[Wed Mar 28 13:48:14 2012] Extracting stamp from image fullrun_mos2_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (229, 390) - (415, 575)
[Wed Mar 28 13:48:14 2012] XMMSAS bgd. selection expression = annulus(27945.375000, 41938.064000, 2690.200077, 5380.400155, X, Y) && !ellipse(27465.442000, 34268.640000, 3233.888093, 3233.888093, 0.000000, X, Y) && !ellipse(27804.738640, 36186.386000, 970.920028, 216.667206, 88.032000, X, Y) && !ellipse(27994.738000, 35019.932000, 1616.944047, 1616.944047, 0.000000, X, Y) && !ellipse(27291.924000, 37404.944000, 585.290417, 585.290417, 0.000000, X, Y) && !ellipse(28356.026000, 41248.256000, 777.147222, 777.147222, 0.000000, X, Y) && !ellipse(27666.670000, 35933.024000, 2102.048060, 2102.048060, 0.000000, X, Y) && !ellipse(27971.213623, 38396.308289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29017.590000, 35913.088200, 1714.400049, 1714.400049, 0.000000, X, Y) && !ellipse(27975.485565, 39017.232025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28033.567800, 37480.108000, 1785.120051, 1785.120051, 0.000000, X, Y) && !ellipse(27715.558197, 37983.841522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28023.183167, 40648.670532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28381.270000, 42333.439000, 1619.984047, 1619.984047, 0.000000, X, Y) && !ellipse(27394.278412, 39530.220856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27991.338745, 43190.954010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26875.052000, 36738.276000, 1735.720050, 1735.720050, 0.000000, X, Y) && !ellipse(27513.154694, 40155.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28380.236816, 44015.515839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27596.235870, 40743.001068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28498.308624, 40411.751648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28711.549957, 42315.898834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28008.994690, 43873.607178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29065.829102, 39100.464539, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 13:48:14 2012] Writing fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src28.gif
[Wed Mar 28 14:41:33 2012] Mean detx,y = (-58.69, 14383.69) 
[Wed Mar 28 14:41:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 14:42:56 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 14:42:56 2012] Setting source spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Mar 28 14:42:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Wed Mar 28 16:37:39 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:39 2012] Error reading totcts from fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Mar 28 16:37:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:44 2012] Using photon index=1.80, rate=0.0849, arf fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src28.arf
[Wed Mar 28 16:37:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:44 2012] Updating source flux to 3.1e-12
[Wed Mar 28 16:44:56 2012] Flag c found in src. 28 procflags, skipping spectral fitting