[Mon Mar 26 20:18:03 2012] Detection parameters:
  Position = (362.1, 393.8) = 5 34 16.49 22 6 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 255.0 +/- 21.4
  Background counts = 113.5
  Rate = 0.07 +/- 0.006

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 8.31'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 10.58 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 10.58"
[Tue Mar 27 05:17:27 2012] source mask rpix=2.4, npix_max = 34, mask sum = 25, frac = 0.726
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 10.58"
[Tue Mar 27 16:18:07 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src12.ximg exists
[Tue Mar 27 16:18:07 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Mar 27 16:18:07 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src12 appears to have run properly
[Tue Mar 27 16:18:10 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Mar 27 16:18:10 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Mar 27 16:18:10 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Mar 27 16:19:17 2012] Spatial fit model total counts = 1633.790000, observed total counts = 1569.000000
[Tue Mar 27 16:19:17 2012] Offset between fit and detection position for source 26 = 3.029433 pixels
[Tue Mar 27 16:19:17 2012] 1603.662000 total counts/ 1440.670000 bgd. counts: snr = 4.294217
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 3.029433 pixels
  Position = (359.1, 393.5) = 5 34 17.43 22 6 21.2
  Extent = 21.2 (12.5-42.3)" x 3.9 (2.6-5.8)", rotation angle = 2
  Source counts = 163.0 +/- 40.0
  Background counts = 1440.7
  Rate = 0.03 +/- 0.006
[Tue Mar 27 16:19:17 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:19:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:19:17 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 16:19:17 2012] Source does appear to be extended
[Tue Mar 27 16:19:17 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.16
[Tue Mar 27 16:19:17 2012] Source is asymmetric
[Tue Mar 27 16:19:17 2012] Source is confused with source 23
[Wed Mar 28 00:11:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:11:55 2012] Initial guess for spatial extent in simple fitting = 12.53"
[Wed Mar 28 00:11:55 2012] source mask rpix=2.9, npix_max = 45, mask sum = 35, frac = 0.766
[Wed Mar 28 00:11:55 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 12.53"
[Wed Mar 28 11:27:05 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src10.ximg exists
[Wed Mar 28 11:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src10.csv
[Wed Mar 28 11:27:05 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Mar 28 11:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src10.csv
[Wed Mar 28 11:27:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Mar 28 11:27:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Mar 28 11:27:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Mar 28 11:27:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Mar 28 11:27:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:28:14 2012] Warning, spatial fit 10 centroid is now closest to src. 49
[Wed Mar 28 11:28:14 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:28:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:28:14 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 11:28:14 2012] Source does appear to be extended
[Wed Mar 28 11:28:14 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.16
[Wed Mar 28 11:28:14 2012] Source is asymmetric
[Wed Mar 28 13:48:10 2012] XMMSAS src. selection expression = ellipse(31190.454000, 34185.181200, 1270.062037, 233.087407, 1.709000, X, Y)
[Wed Mar 28 13:48:10 2012] Writing source region out to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src26_src.reg
[Wed Mar 28 13:48:10 2012] Extracting stamp from image fullrun_mos2_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (286, 320) - (432, 466)
[Wed Mar 28 13:48:11 2012] XMMSAS bgd. selection expression = annulus(31190.454000, 34185.181200, 2116.770061, 4233.540122, X, Y) && !ellipse(27465.442000, 34268.640000, 3233.888093, 3233.888093, 0.000000, X, Y) && !ellipse(27804.738640, 36186.386000, 970.920028, 216.667206, 88.032000, X, Y) && !ellipse(27035.286000, 34605.022820, 1704.208049, 1704.208049, 0.000000, X, Y) && !ellipse(27349.012817, 35119.779114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26584.560852, 34374.087585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27994.738000, 35019.932000, 1616.944047, 1616.944047, 0.000000, X, Y) && !ellipse(28308.524000, 34829.262000, 1051.024030, 1051.024030, 0.000000, X, Y) && !ellipse(30054.339400, 34268.390400, 1652.224048, 1652.224048, 0.000000, X, Y) && !ellipse(27291.924000, 37404.944000, 585.290417, 585.290417, 0.000000, X, Y) && !ellipse(29037.658000, 34245.866000, 1629.464047, 1629.464047, 0.000000, X, Y) && !ellipse(27666.670000, 35933.024000, 2102.048060, 2102.048060, 0.000000, X, Y) && !ellipse(27971.213623, 38396.308289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34141.846863, 30213.922180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29017.590000, 35913.088200, 1714.400049, 1714.400049, 0.000000, X, Y) && !ellipse(27975.485565, 39017.232025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27199.264600, 35748.322000, 727.445621, 727.445621, 0.000000, X, Y) && !ellipse(28033.567800, 37480.108000, 1785.120051, 1785.120051, 0.000000, X, Y) && !ellipse(27715.558197, 37983.841522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35188.492000, 29370.480000, 1649.576047, 1649.576047, 0.000000, X, Y) && !ellipse(26457.902679, 35685.016266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31218.210907, 34796.327515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34750.212311, 31953.030090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.247986, 34933.573944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35682.730286, 30225.835297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26875.052000, 36738.276000, 1735.720050, 1735.720050, 0.000000, X, Y) && !ellipse(30843.449620, 34131.121800, 1675.808048, 1675.808048, 0.000000, X, Y) && !ellipse(34012.013275, 32060.553467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34111.898132, 31085.894867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.000000, 31578.296600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29065.829102, 39100.464539, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 13:48:11 2012] Writing fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src26.gif
[Wed Mar 28 14:05:05 2012] Mean detx,y = (-3623.14, 6918.98) 
[Wed Mar 28 14:05:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 14:05:29 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 14:05:29 2012] Setting source spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Mar 28 14:05:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed Mar 28 16:37:35 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:35 2012] Error reading totcts from fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Mar 28 16:37:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:40 2012] Using photon index=1.80, rate=0.0257, arf fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src26.arf
[Wed Mar 28 16:37:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:40 2012] Updating source flux to 5.5e-13
[Wed Mar 28 16:44:56 2012] Flag c found in src. 26 procflags, skipping spectral fitting