[Mon Mar 26 20:18:03 2012] Detection parameters:
  Position = (306.1, 395.7) = 5 34 34.00 22 6 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 340.0 +/- 25.4
  Background counts = 164.3
  Rate = 0.09 +/- 0.006

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 7.07'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Tue Mar 27 05:17:27 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.770
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.96"
[Tue Mar 27 16:18:07 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src7.ximg exists
[Tue Mar 27 16:18:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src7.csv
[Tue Mar 27 16:18:07 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Mar 27 16:18:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src7.csv
[Tue Mar 27 16:18:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Mar 27 16:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Mar 27 16:18:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Mar 27 16:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Mar 27 16:18:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:19:17 2012] Source 25 is offset by -6.558756 and 1.414529 pixels which is larger than
2 X fitted extent = 5.357885 x 5.357885, not incorporating fit results
[Tue Mar 27 16:19:17 2012] Warning, spatial fit 7 centroid is now closest to src. 47
[Tue Mar 27 16:19:17 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:19:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:19:17 2012] Assessing source extent using major
[Tue Mar 27 16:19:17 2012] Source does appear to be extended
[Tue Mar 27 16:19:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:19:17 2012] Source is confused with source 14
[Wed Mar 28 00:11:55 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:11:55 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Wed Mar 28 00:11:55 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.770
[Wed Mar 28 00:11:55 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.96"
[Wed Mar 28 11:27:05 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src5.ximg exists
[Wed Mar 28 11:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src5.csv
[Wed Mar 28 11:27:05 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Mar 28 11:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src5.csv
[Wed Mar 28 11:27:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Mar 28 11:27:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Mar 28 11:27:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Mar 28 11:27:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Mar 28 11:27:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:28:14 2012] Source 25 is offset by 4.257826 and 6.142317 pixels which is larger than
2 X fitted extent = 1.185048 x 1.185048, not incorporating fit results
[Wed Mar 28 11:28:14 2012] Warning, spatial fit 5 centroid is now closest to src. 20
[Wed Mar 28 11:28:14 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:28:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:28:14 2012] Assessing source extent using major
[Wed Mar 28 11:28:14 2012] Source does appear to be extended
[Wed Mar 28 11:28:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 13:48:10 2012] XMMSAS src. selection expression = ellipse(26584.560852, 34374.087585, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 13:48:10 2012] Writing source region out to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src25_src.reg
[Wed Mar 28 13:48:10 2012] Extracting stamp from image fullrun_mos2_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (269, 358) - (344, 433)
[Wed Mar 28 13:48:10 2012] XMMSAS bgd. selection expression = annulus(26584.560852, 34374.087585, 1087.500000, 2175.000000, X, Y) && !ellipse(27465.442000, 34268.640000, 3233.888093, 3233.888093, 0.000000, X, Y) && !ellipse(27804.738640, 36186.386000, 970.920028, 216.667206, 88.032000, X, Y) && !ellipse(27035.286000, 34605.022820, 1704.208049, 1704.208049, 0.000000, X, Y) && !ellipse(27349.012817, 35119.779114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27994.738000, 35019.932000, 1616.944047, 1616.944047, 0.000000, X, Y) && !ellipse(28308.524000, 34829.262000, 1051.024030, 1051.024030, 0.000000, X, Y) && !ellipse(30054.339400, 34268.390400, 1652.224048, 1652.224048, 0.000000, X, Y) && !ellipse(29037.658000, 34245.866000, 1629.464047, 1629.464047, 0.000000, X, Y) && !ellipse(25251.369751, 34446.840698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27666.670000, 35933.024000, 2102.048060, 2102.048060, 0.000000, X, Y) && !ellipse(29017.590000, 35913.088200, 1714.400049, 1714.400049, 0.000000, X, Y) && !ellipse(27199.264600, 35748.322000, 727.445621, 727.445621, 0.000000, X, Y) && !ellipse(28033.567800, 37480.108000, 1785.120051, 1785.120051, 0.000000, X, Y) && !ellipse(26457.902679, 35685.016266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26875.052000, 36738.276000, 1735.720050, 1735.720050, 0.000000, X, Y) && !ellipse(23724.942963, 34481.743713, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 13:48:10 2012] Writing fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src25.gif
[Wed Mar 28 14:01:38 2012] Mean detx,y = (934.17, 6921.17) 
[Wed Mar 28 14:01:40 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 14:02:03 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 14:02:04 2012] Setting source spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Mar 28 14:02:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed Mar 28 14:58:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 14:58:26 2012] rmf not generated due to insufficient counts
[Wed Mar 28 16:37:34 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:34 2012] Error reading totcts from fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Mar 28 16:37:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:40 2012] Using photon index=1.80, rate=0.0868, arf fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src25.arf
[Wed Mar 28 16:37:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:40 2012] Updating source flux to 1.8e-12
[Wed Mar 28 16:44:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting