[Mon Mar 26 20:18:03 2012] Detection parameters:
  Position = (339.5, 395.8) = 5 34 23.57 22 6 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 327.0 +/- 25.0
  Background counts = 151.9
  Rate = 0.09 +/- 0.007

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 7.66'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 10.26"
[Tue Mar 27 05:17:27 2012] source mask rpix=2.4, npix_max = 32, mask sum = 24, frac = 0.734
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.26"
[Tue Mar 27 16:18:07 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src6.ximg exists
[Tue Mar 27 16:18:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src6.csv
[Tue Mar 27 16:18:07 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Mar 27 16:18:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src6.csv
[Tue Mar 27 16:18:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Mar 27 16:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Mar 27 16:18:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Mar 27 16:18:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Mar 27 16:18:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:19:17 2012] Warning, spatial fit 6 centroid is now closest to src. 42
[Tue Mar 27 16:19:17 2012] Source 24 is offset by 2.907136 and -5.297802 pixels which is larger than
2 X fitted extent = 1.771218 x 1.771218, not incorporating fit results
[Tue Mar 27 16:19:17 2012] Spatial fit model total counts = 2087.430000, observed total counts = 2122.000000
[Tue Mar 27 16:19:17 2012] Offset between fit and detection position for source 24 = 0.449121 pixels
[Tue Mar 27 16:19:17 2012] Warning, changing simple spatial fit ID from 6 to 48
[Tue Mar 27 16:19:17 2012] 2021.505700 total counts/ 1981.620000 bgd. counts: snr = 0.895998
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.449121 pixels
  Position = (339.6, 395.4) = 5 34 23.54 22 6 29.5
  Extent = 4.5 (2.6-12.4)", rotation angle = 0
  Source counts = 39.9 +/- 45.0
  Background counts = 1981.6
  Rate = 0.006 +/- 0.007
  Deleting source due to low Poisson probability