[Mon Mar 26 20:18:03 2012] Detection parameters:
  Position = (314.9, 404.2) = 5 34 31.25 22 6 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 316.1 +/- 27.8
  Background counts = 150.7
  Rate = 0.09 +/- 0.008

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 7.76'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Tue Mar 27 05:17:27 2012] source mask rpix=2.4, npix_max = 32, mask sum = 28, frac = 0.850
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.31"
[Tue Mar 27 16:18:07 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src5.ximg exists
[Tue Mar 27 16:18:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src5.csv
[Tue Mar 27 16:18:07 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Mar 27 16:18:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src5.csv
[Tue Mar 27 16:18:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Mar 27 16:18:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Mar 27 16:18:09 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Mar 27 16:19:17 2012] Warning, spatial fit 5 centroid is now closest to src. 12
[Tue Mar 27 16:19:17 2012] Source 20 is offset by 6.438630 and -0.561160 pixels which is larger than
2 X fitted extent = 1.509789 x 1.509789, not incorporating fit results
[Tue Mar 27 16:19:17 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:19:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:19:17 2012] Assessing source extent using major
[Tue Mar 27 16:19:17 2012] Source does appear to be extended
[Tue Mar 27 16:19:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:19:17 2012] Source is confused with source 14
[Tue Mar 27 16:19:17 2012] Source is confused with source 21
[Wed Mar 28 00:11:55 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:11:55 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Wed Mar 28 00:11:55 2012] source mask rpix=2.4, npix_max = 32, mask sum = 28, frac = 0.850
[Wed Mar 28 00:11:55 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.31"
[Wed Mar 28 11:27:05 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src4.ximg exists
[Wed Mar 28 11:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src4.csv
[Wed Mar 28 11:27:05 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Mar 28 11:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src4.csv
[Wed Mar 28 11:27:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Mar 28 11:27:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Mar 28 11:27:09 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Mar 28 11:28:14 2012] Warning, spatial fit 4 centroid is now closest to src. 41
[Wed Mar 28 11:28:14 2012] Source 20 is offset by -0.566450 and -1.247298 pixels which is larger than
2 X fitted extent = 1.185048 x 1.185048, not incorporating fit results
[Wed Mar 28 11:28:14 2012] Source 20 is offset by 6.381825 and -0.544608 pixels which is larger than
2 X fitted extent = 1.560143 x 1.560143, not incorporating fit results
[Wed Mar 28 11:28:14 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:28:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:28:14 2012] Assessing source extent using major
[Wed Mar 28 11:28:14 2012] Source does appear to be extended
[Wed Mar 28 11:28:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 13:48:10 2012] XMMSAS src. selection expression = ellipse(27349.012817, 35119.779114, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 13:48:10 2012] Writing source region out to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src20_src.reg
[Wed Mar 28 13:48:10 2012] Extracting stamp from image fullrun_mos2_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (277, 367) - (352, 442)
[Wed Mar 28 13:48:10 2012] XMMSAS bgd. selection expression = annulus(27349.012817, 35119.779114, 1087.500000, 2175.000000, X, Y) && !ellipse(27465.442000, 34268.640000, 3233.888093, 3233.888093, 0.000000, X, Y) && !ellipse(27804.738640, 36186.386000, 970.920028, 216.667206, 88.032000, X, Y) && !ellipse(27035.286000, 34605.022820, 1704.208049, 1704.208049, 0.000000, X, Y) && !ellipse(26584.560852, 34374.087585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27994.738000, 35019.932000, 1616.944047, 1616.944047, 0.000000, X, Y) && !ellipse(28308.524000, 34829.262000, 1051.024030, 1051.024030, 0.000000, X, Y) && !ellipse(30054.339400, 34268.390400, 1652.224048, 1652.224048, 0.000000, X, Y) && !ellipse(27291.924000, 37404.944000, 585.290417, 585.290417, 0.000000, X, Y) && !ellipse(31190.454000, 34185.181200, 1693.416049, 310.783209, 1.709000, X, Y) && !ellipse(29037.658000, 34245.866000, 1629.464047, 1629.464047, 0.000000, X, Y) && !ellipse(25251.369751, 34446.840698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27666.670000, 35933.024000, 2102.048060, 2102.048060, 0.000000, X, Y) && !ellipse(29017.590000, 35913.088200, 1714.400049, 1714.400049, 0.000000, X, Y) && !ellipse(27199.264600, 35748.322000, 727.445621, 727.445621, 0.000000, X, Y) && !ellipse(28033.567800, 37480.108000, 1785.120051, 1785.120051, 0.000000, X, Y) && !ellipse(27715.558197, 37983.841522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26457.902679, 35685.016266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.247986, 34933.573944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26875.052000, 36738.276000, 1735.720050, 1735.720050, 0.000000, X, Y) && !ellipse(30843.449620, 34131.121800, 1675.808048, 1675.808048, 0.000000, X, Y)
[Wed Mar 28 13:48:10 2012] Writing fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src20.gif
[Wed Mar 28 14:01:12 2012] Mean detx,y = (224.45, 7630.91) 
[Wed Mar 28 14:01:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 14:01:29 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 14:01:29 2012] Setting source spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Mar 28 14:01:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Mar 28 14:57:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 14:57:59 2012] rmf not generated due to insufficient counts
[Wed Mar 28 16:37:34 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:34 2012] Error reading totcts from fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Mar 28 16:37:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:39 2012] Using photon index=1.80, rate=0.0898, arf fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src20.arf
[Wed Mar 28 16:37:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:40 2012] Updating source flux to 2.6e-12
[Wed Mar 28 16:44:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting