[Mon Mar 26 20:18:03 2012] Detection parameters:
  Position = (321.5, 408.2) = 5 34 29.20 22 7 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 347.6 +/- 26.7
  Background counts = 124.3
  Rate = 0.05 +/- 0.004

[Mon Mar 26 20:18:07 2012] Off-axis axis estimate = 8.13'
[Tue Mar 27 05:17:27 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:17:27 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Tue Mar 27 05:17:27 2012] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.589
[Tue Mar 27 05:17:27 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 10.49"
[Tue Mar 27 16:18:07 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src22.ximg exists
[Tue Mar 27 16:18:07 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src22_1.ximg exists
[Tue Mar 27 16:18:07 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_src22 appears to have run properly
[Tue Mar 27 16:18:10 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Tue Mar 27 16:18:10 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Tue Mar 27 16:18:10 2012] Fit fullrun_mos2_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Tue Mar 27 16:19:17 2012] Warning, spatial fit 22 centroid is now closest to src. 22
[Tue Mar 27 16:19:17 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:19:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:19:17 2012] Assessing source extent using major
[Tue Mar 27 16:19:17 2012] Source does appear to be extended
[Tue Mar 27 16:19:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:19:17 2012] Source is confused with source 14
[Tue Mar 27 16:19:17 2012] Source is confused with source 21
[Tue Mar 27 16:19:17 2012] Source is confused with source 22
[Wed Mar 28 00:11:55 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 00:11:55 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Wed Mar 28 00:11:55 2012] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.589
[Wed Mar 28 00:11:55 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 10.49"
[Wed Mar 28 11:27:06 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src20.ximg exists
[Wed Mar 28 11:27:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src20.csv
[Wed Mar 28 11:27:06 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Mar 28 11:27:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src20.csv
[Wed Mar 28 11:27:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Mar 28 11:27:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Mar 28 11:27:09 2012] fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Mar 28 11:27:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Mar 28 11:27:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:28:14 2012] Spatial fit model total counts = 3830.530000, observed total counts = 3996.000000
[Wed Mar 28 11:28:14 2012] Offset between fit and detection position for source 13 = 6.105707 pixels
[Wed Mar 28 11:28:14 2012] Warning, changing simple spatial fit ID from 20 to 7
[Wed Mar 28 11:28:14 2012] 2276.270000 total counts/ 1762.550000 bgd. counts: snr = 12.236459
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 6.105707 pixels
  Position = (318.6, 413.6) = 5 34 30.11 22 7 48.7
  Extent = 26.3 (6.8-52.6)", rotation angle = 0
  Source counts = 513.7 +/- 47.7
  Background counts = 1762.5
  Rate = 0.08 +/- 0.008
[Wed Mar 28 11:28:14 2012] Source 13 is offset by 5.020448 and 1.923218 pixels which is larger than
2 X fitted extent = 3.316589 x 3.316589, not incorporating fit results
[Wed Mar 28 11:28:14 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:28:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:28:14 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 11:28:14 2012] Source does appear to be extended
[Wed Mar 28 11:28:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 13:48:11 2012] XMMSAS src. selection expression = ellipse(27666.670000, 35933.024000, 1576.536045, 1576.536045, 0.000000, X, Y)
[Wed Mar 28 13:48:11 2012] Writing source region out to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src13_src.reg
[Wed Mar 28 13:48:11 2012] Extracting stamp from image fullrun_mos2_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (228, 323) - (409, 504)
[Wed Mar 28 13:48:11 2012] XMMSAS bgd. selection expression = annulus(27666.670000, 35933.024000, 2627.560076, 5255.120151, X, Y) && !ellipse(27465.442000, 34268.640000, 3233.888093, 3233.888093, 0.000000, X, Y) && !ellipse(27804.738640, 36186.386000, 970.920028, 216.667206, 88.032000, X, Y) && !ellipse(27035.286000, 34605.022820, 1704.208049, 1704.208049, 0.000000, X, Y) && !ellipse(27349.012817, 35119.779114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26584.560852, 34374.087585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27994.738000, 35019.932000, 1616.944047, 1616.944047, 0.000000, X, Y) && !ellipse(28308.524000, 34829.262000, 1051.024030, 1051.024030, 0.000000, X, Y) && !ellipse(30054.339400, 34268.390400, 1652.224048, 1652.224048, 0.000000, X, Y) && !ellipse(27291.924000, 37404.944000, 585.290417, 585.290417, 0.000000, X, Y) && !ellipse(31190.454000, 34185.181200, 1693.416049, 310.783209, 1.709000, X, Y) && !ellipse(29037.658000, 34245.866000, 1629.464047, 1629.464047, 0.000000, X, Y) && !ellipse(28356.026000, 41248.256000, 777.147222, 777.147222, 0.000000, X, Y) && !ellipse(25251.369751, 34446.840698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27971.213623, 38396.308289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29017.590000, 35913.088200, 1714.400049, 1714.400049, 0.000000, X, Y) && !ellipse(27975.485565, 39017.232025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27199.264600, 35748.322000, 727.445621, 727.445621, 0.000000, X, Y) && !ellipse(28033.567800, 37480.108000, 1785.120051, 1785.120051, 0.000000, X, Y) && !ellipse(27715.558197, 37983.841522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28023.183167, 40648.670532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26457.902679, 35685.016266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28381.270000, 42333.439000, 1619.984047, 1619.984047, 0.000000, X, Y) && !ellipse(31218.210907, 34796.327515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.247986, 34933.573944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27394.278412, 39530.220856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26875.052000, 36738.276000, 1735.720050, 1735.720050, 0.000000, X, Y) && !ellipse(30843.449620, 34131.121800, 1675.808048, 1675.808048, 0.000000, X, Y) && !ellipse(27513.154694, 40155.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27596.235870, 40743.001068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23724.942963, 34481.743713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28498.308624, 40411.751648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27945.375000, 41938.064000, 2152.160062, 2152.160062, 0.000000, X, Y) && !ellipse(29065.829102, 39100.464539, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 13:48:11 2012] Writing fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src13.gif
[Wed Mar 28 14:09:16 2012] Mean detx,y = (-69.41, 8393.03) 
[Wed Mar 28 14:09:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 14:10:13 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 14:10:13 2012] Setting source spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Mar 28 14:10:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Mar 28 16:37:35 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:35 2012] Error reading totcts from fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Mar 28 16:37:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:40 2012] Using photon index=1.80, rate=0.0811, arf fullrun_mos2_xmm0611180701_pi300-10000_pass1_cl_src13.arf
[Wed Mar 28 16:37:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:40 2012] Updating source flux to 1.8e-12
[Wed Mar 28 16:44:56 2012] Flag b found in src. 13 procflags, skipping spectral fitting
[Wed Mar 28 16:44:56 2012] Flag c found in src. 13 procflags, skipping spectral fitting