[Mon Mar 26 20:16:19 2012] Detection parameters:
  Position = (405.9, 384.1) = 5 34 2.76 22 5 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.0 +/- 18.3
  Background counts = 114.2
  Rate = 0.03 +/- 0.005

[Mon Mar 26 20:16:20 2012] Off-axis axis estimate = 9.97'
[Mon Mar 26 20:21:45 2012] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 20:21:45 2012] Initial guess for spatial extent in simple fitting = 11.41"
[Mon Mar 26 20:21:45 2012] source mask rpix=2.6, npix_max = 39, mask sum = 28, frac = 0.718
[Mon Mar 26 20:21:45 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 11.41"
[Tue Mar 27 05:17:23 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src56.ximg exists
[Tue Mar 27 05:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src56.csv
[Tue Mar 27 05:17:23 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src56_1.ximg exists
[Tue Mar 27 05:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src56.csv
[Tue Mar 27 05:17:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 05:17:26 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Tue Mar 27 05:17:26 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Tue Mar 27 05:17:26 2012] Fit fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Tue Mar 27 16:18:47 2012] Source 56 is offset by 2.012760 and 1.170627 pixels which is larger than
2 X fitted extent = 1.241605 x 1.241605, not incorporating fit results
[Tue Mar 27 16:18:48 2012] Warning, spatial fit 56 centroid is now closest to src. 70
[Tue Mar 27 16:18:48 2012] Source 56 is offset by 0.428920 and -1.993971 pixels which is larger than
2 X fitted extent = 1.362823 x 1.362823, not incorporating fit results
[Tue Mar 27 16:18:48 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:18:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:18:48 2012] Assessing source extent using major
[Tue Mar 27 16:18:48 2012] Source does appear to be extended
[Tue Mar 27 16:18:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:18:48 2012] Source is confused with source 33
[Tue Mar 27 16:19:47 2012] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 16:19:47 2012] Initial guess for spatial extent in simple fitting = 11.41"
[Tue Mar 27 16:19:47 2012] source mask rpix=2.6, npix_max = 39, mask sum = 28, frac = 0.718
[Tue Mar 27 16:19:47 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 11.41"
[Wed Mar 28 00:11:52 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src48.ximg exists
[Wed Mar 28 00:11:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src48.csv
[Wed Mar 28 00:11:52 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src48_1.ximg exists
[Wed Mar 28 00:11:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src48.csv
[Wed Mar 28 00:11:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 00:11:54 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Wed Mar 28 00:11:54 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Wed Mar 28 00:11:54 2012] Fit fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Wed Mar 28 11:27:40 2012] Warning, spatial fit 48 centroid is now closest to src. 57
[Wed Mar 28 11:27:40 2012] Spatial fit model total counts = 2001.270000, observed total counts = 1989.000000
[Wed Mar 28 11:27:40 2012] Offset between fit and detection position for source 56 = 4.269802 pixels
[Wed Mar 28 11:27:40 2012] Warning, changing simple spatial fit ID from 48 to 49
[Wed Mar 28 11:27:40 2012] 1866.318000 total counts/ 1749.090000 bgd. counts: snr = 2.803014
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 4.269802 pixels
  Position = (410.1, 384.9) = 5 34 1.45 22 5 43.5
  Extent = 22.1" x 22.1", rotation angle = -0
  Source counts = 117.2 +/- 43.2
  Background counts = 1749.1
  Rate = 0.02 +/- 0.007
[Wed Mar 28 11:27:40 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:27:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:27:40 2012] Assessing source extent using major
[Wed Mar 28 11:27:40 2012] Source does appear to be extended
[Wed Mar 28 11:27:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 11:28:42 2012] XMMSAS src. selection expression = ellipse(35634.472000, 33433.702000, 1324.458038, 1324.458038, -0.000000, X, Y)
[Wed Mar 28 11:28:42 2012] Writing source region out to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src56_src.reg
[Wed Mar 28 11:28:42 2012] Extracting stamp from image fullrun_mos1_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (334, 309) - (486, 461)
[Wed Mar 28 11:28:42 2012] XMMSAS bgd. selection expression = annulus(35634.472000, 33433.702000, 2207.430064, 4414.860127, X, Y) && !ellipse(31435.896759, 34045.365753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31033.123505, 34046.178192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30383.982117, 34048.750916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34244.532776, 32302.593903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34161.175476, 30665.622314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34338.085388, 29706.299164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.005310, 28737.508179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34388.318542, 28304.568481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32225.270000, 34086.408000, 3097.744089, 3097.744089, 0.000000, X, Y) && !ellipse(35318.656738, 32829.057007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34441.541260, 31703.236969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34353.975739, 30129.848022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34511.923431, 29186.617004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32746.995361, 34834.780304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33729.565948, 34619.348572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33365.967651, 34487.045807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34685.700409, 33450.450684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34439.411926, 31184.446899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32002.801270, 35213.777771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33174.082000, 35056.617400, 1777.568051, 1777.568051, 0.000000, X, Y) && !ellipse(30652.765800, 34806.092000, 2068.416060, 592.655217, 269.902400, X, Y) && !ellipse(30495.262000, 34568.962000, 1004.792029, 1004.792029, 0.000000, X, Y) && !ellipse(34937.211334, 32145.410858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35007.033295, 31012.844391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35980.972382, 29337.016449, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 11:28:42 2012] Writing fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src56.gif
[Wed Mar 28 12:06:05 2012] Mean detx,y = (6488.51, 7898.46) 
[Wed Mar 28 12:06:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 12:06:35 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 12:06:35 2012] Setting source spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Wed Mar 28 12:06:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Wed Mar 28 16:37:29 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:29 2012] Error reading totcts from fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Wed Mar 28 16:37:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:33 2012] Using photon index=1.80, rate=0.0185, arf fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src56.arf
[Wed Mar 28 16:37:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:33 2012] Updating source flux to 3e-13
[Wed Mar 28 16:37:47 2012] Flag b found in src. 56 procflags, skipping spectral fitting
[Wed Mar 28 16:37:47 2012] Flag c found in src. 56 procflags, skipping spectral fitting