[Mon Mar 26 20:16:16 2012] Detection parameters:
  Position = (320.0, 394.0) = 5 34 29.67 22 6 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 410.4 +/- 30.3
  Background counts = 240.7
  Rate = 0.1 +/- 0.007

[Mon Mar 26 20:16:20 2012] Off-axis axis estimate = 7.10'
[Mon Mar 26 20:21:45 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 20:21:45 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Mon Mar 26 20:21:45 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.961
[Mon Mar 26 20:21:45 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.98"
[Tue Mar 27 05:17:22 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src5.ximg exists
[Tue Mar 27 05:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src5.csv
[Tue Mar 27 05:17:22 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Mar 27 05:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src5.csv
[Tue Mar 27 05:17:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 05:17:24 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Mar 27 05:17:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Mar 27 05:17:24 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Mar 27 05:17:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Mar 27 05:17:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:47 2012] Warning, spatial fit 5 centroid is now closest to src. 54
[Tue Mar 27 16:18:48 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:18:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:18:48 2012] Assessing source extent using major
[Tue Mar 27 16:18:48 2012] Source does appear to be extended
[Tue Mar 27 16:18:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:18:48 2012] Source is confused with source 7
[Tue Mar 27 16:19:47 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 16:19:47 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Tue Mar 27 16:19:47 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.961
[Tue Mar 27 16:19:47 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.98"
[Wed Mar 28 00:11:51 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src4.ximg exists
[Wed Mar 28 00:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src4.csv
[Wed Mar 28 00:11:51 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Mar 28 00:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src4.csv
[Wed Mar 28 00:11:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 00:11:53 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Mar 28 00:11:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Mar 28 00:11:53 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Mar 28 00:11:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Mar 28 00:11:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:39 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.202035 pixels away
[Wed Mar 28 11:27:39 2012] Warning, spatial fit 4 centroid is now closest to src. 29
[Wed Mar 28 11:27:39 2012] Source 5 is offset by -0.528205 and 3.226843 pixels which is larger than
2 X fitted extent = 1.140524 x 1.140524, not incorporating fit results
[Wed Mar 28 11:27:40 2012] Spatial fit model total counts = 4000.440000, observed total counts = 4004.000000
[Wed Mar 28 11:27:40 2012] Offset between fit and detection position for source 5 = 1.376574 pixels
[Wed Mar 28 11:27:40 2012] Warning, changing simple spatial fit ID from 4 to 25
[Wed Mar 28 11:27:40 2012] 3935.893000 total counts/ 3441.400000 bgd. counts: snr = 8.429321
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.376574 pixels
  Position = (320.8, 395.1) = 5 34 29.42 22 6 28.2
  Extent = 25.0 (24.8-49.9)", rotation angle = 0
  Source counts = 494.5 +/- 62.7
  Background counts = 3441.4
  Rate = 0.08 +/- 0.01
[Wed Mar 28 11:27:40 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:27:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:27:40 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 11:27:40 2012] Source does appear to be extended
[Wed Mar 28 11:27:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 11:28:39 2012] XMMSAS src. selection expression = ellipse(27856.968000, 34322.734000, 1497.684043, 1497.684043, 0.000000, X, Y)
[Wed Mar 28 11:28:39 2012] Writing source region out to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src5_src.reg
[Wed Mar 28 11:28:39 2012] Extracting stamp from image fullrun_mos1_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (235, 309) - (407, 481)
[Wed Mar 28 11:28:39 2012] XMMSAS bgd. selection expression = annulus(27856.968000, 34322.734000, 2496.140072, 4992.280144, X, Y) && !ellipse(28871.334930, 34120.545563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31435.896759, 34045.365753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.913055, 34312.533386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25993.054840, 34300.721161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27119.769623, 34307.087921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31033.123505, 34046.178192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30383.982117, 34048.750916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28021.601800, 40081.070000, 1947.600056, 1947.600056, 0.000000, X, Y) && !ellipse(27975.947540, 39546.060760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28479.663000, 34992.688800, 998.456029, 998.456029, 0.000000, X, Y) && !ellipse(28930.414642, 34546.335266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32225.270000, 34086.408000, 3097.744089, 3097.744089, 0.000000, X, Y) && !ellipse(27390.911835, 39708.118439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27752.654000, 36697.918000, 1791.832052, 1791.832052, 0.000000, X, Y) && !ellipse(27913.511871, 35528.518219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32746.995361, 34834.780304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33365.967651, 34487.045807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26269.005310, 34394.433075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28077.183807, 37879.674103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27805.098800, 36976.164000, 1228.056035, 1228.056035, 0.000000, X, Y) && !ellipse(32002.801270, 35213.777771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33174.082000, 35056.617400, 1777.568051, 1777.568051, 0.000000, X, Y) && !ellipse(30652.765800, 34806.092000, 2068.416060, 592.655217, 269.902400, X, Y) && !ellipse(30495.262000, 34568.962000, 1004.792029, 1004.792029, 0.000000, X, Y)
[Wed Mar 28 11:28:39 2012] Writing fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src5.gif
[Wed Mar 28 11:30:34 2012] Mean detx,y = (7434.84, 156.81) 
[Wed Mar 28 11:30:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 11:31:24 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 11:31:25 2012] Setting source spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Mar 28 11:31:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Mar 28 16:37:26 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:26 2012] Error reading totcts from fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Mar 28 16:37:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:30 2012] Using photon index=1.80, rate=0.0782, arf fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src5.arf
[Wed Mar 28 16:37:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:30 2012] Updating source flux to 1.2e-12
[Wed Mar 28 16:37:47 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Wed Mar 28 16:37:47 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Wed Mar 28 16:44:56 2012] Reading fit data from xmm0611180701/analysis//spectral/fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src5_pl.csv
[Wed Mar 28 16:44:56 2012] Spectral fit parameter nH value = 2.55563e+21
[Wed Mar 28 16:44:56 2012] Spectral fit parameter PhoIndex value = 2.3546
[Wed Mar 28 16:44:56 2012] Failed to get F(0.3-8.0) from xmm0611180701/analysis//spectral/fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Wed Mar 28 16:44:56 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:44:56 2012] Using Nh = 2.6e+21, photon index=2.35, rate=0.0782, arf fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src5.arf
[Wed Mar 28 16:44:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:44:56 2012] Updating source flux to 1e-12