[Mon Mar 26 20:16:18 2012] Detection parameters:
  Position = (321.4, 408.9) = 5 34 29.22 22 7 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.0 +/- 26.0
  Background counts = 233.4
  Rate = 0.04 +/- 0.006

[Mon Mar 26 20:16:20 2012] Off-axis axis estimate = 8.18'
[Mon Mar 26 20:21:45 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 20:21:45 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Mon Mar 26 20:21:45 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.057
[Mon Mar 26 20:21:45 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 10.52"
[Tue Mar 27 05:17:23 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src49.ximg exists
[Tue Mar 27 05:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src49.csv
[Tue Mar 27 05:17:23 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src49_1.ximg exists
[Tue Mar 27 05:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src49.csv
[Tue Mar 27 05:17:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 05:17:26 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Tue Mar 27 05:17:26 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Tue Mar 27 05:17:26 2012] Fit fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Tue Mar 27 16:18:47 2012] Source 49 is offset by 5.335263 and 2.998416 pixels which is larger than
2 X fitted extent = 1.305963 x 1.241605, not incorporating fit results
[Tue Mar 27 16:18:48 2012] Source 49 is offset by -7.686185 and -3.980135 pixels which is larger than
2 X fitted extent = 1.261076 x 1.261076, not incorporating fit results
[Tue Mar 27 16:18:48 2012] Warning, spatial fit 49 centroid is now closest to src. 28
[Tue Mar 27 16:18:48 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:18:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:18:48 2012] Assessing source extent using major
[Tue Mar 27 16:18:48 2012] Source does appear to be extended
[Tue Mar 27 16:18:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:19:47 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 16:19:47 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Tue Mar 27 16:19:47 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.057
[Tue Mar 27 16:19:47 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 10.52"
[Wed Mar 28 00:11:52 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src41.ximg exists
[Wed Mar 28 00:11:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src41.csv
[Wed Mar 28 00:11:52 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed Mar 28 00:11:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src41.csv
[Wed Mar 28 00:11:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 00:11:54 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed Mar 28 00:11:54 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed Mar 28 00:11:54 2012] Fit fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Wed Mar 28 11:27:40 2012] Warning, spatial fit 41 centroid is now closest to src. 48
[Wed Mar 28 11:27:40 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:27:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:27:40 2012] Assessing source extent using major
[Wed Mar 28 11:27:40 2012] Source does appear to be extended
[Wed Mar 28 11:27:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 11:27:40 2012] Source is confused with source 5
[Wed Mar 28 11:27:40 2012] Source is confused with source 48
[Wed Mar 28 11:28:42 2012] XMMSAS src. selection expression = ellipse(27913.511871, 35528.518219, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 11:28:42 2012] Writing source region out to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src49_src.reg
[Wed Mar 28 11:28:42 2012] Extracting stamp from image fullrun_mos1_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (284, 371) - (359, 446)
[Wed Mar 28 11:28:42 2012] XMMSAS bgd. selection expression = annulus(27913.511871, 35528.518219, 1087.500000, 2175.000000, X, Y) && !ellipse(28871.334930, 34120.545563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27856.968000, 34322.734000, 1996.912057, 1996.912057, 0.000000, X, Y) && !ellipse(28309.913055, 34312.533386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25993.054840, 34300.721161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27119.769623, 34307.087921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30383.982117, 34048.750916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28479.663000, 34992.688800, 998.456029, 998.456029, 0.000000, X, Y) && !ellipse(28930.414642, 34546.335266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32225.270000, 34086.408000, 3097.744089, 3097.744089, 0.000000, X, Y) && !ellipse(27752.654000, 36697.918000, 1791.832052, 1791.832052, 0.000000, X, Y) && !ellipse(26269.005310, 34394.433075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28077.183807, 37879.674103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27805.098800, 36976.164000, 1228.056035, 1228.056035, 0.000000, X, Y) && !ellipse(30652.765800, 34806.092000, 2068.416060, 592.655217, 269.902400, X, Y) && !ellipse(30495.262000, 34568.962000, 1004.792029, 1004.792029, 0.000000, X, Y)
[Wed Mar 28 11:28:42 2012] Writing fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src49.gif
[Wed Mar 28 12:02:54 2012] Mean detx,y = (8260.27, 164.05) 
[Wed Mar 28 12:02:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 12:03:11 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 12:03:11 2012] Setting source spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed Mar 28 12:03:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Wed Mar 28 13:14:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 13:14:12 2012] rmf not generated due to insufficient counts
[Wed Mar 28 16:37:28 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:28 2012] Error reading totcts from fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed Mar 28 16:37:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:32 2012] Using photon index=1.80, rate=0.0383, arf fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src49.arf
[Wed Mar 28 16:37:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:32 2012] Updating source flux to 6.4e-13
[Wed Mar 28 16:37:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting