[Mon Mar 26 20:16:18 2012] Detection parameters:
  Position = (389.5, 259.1) = 5 34 7.94 21 56 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.2 +/- 21.4
  Background counts = 127.9
  Rate = 0.05 +/- 0.006

[Mon Mar 26 20:16:20 2012] Off-axis axis estimate = 7.19'
[Mon Mar 26 20:21:45 2012] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 20:21:45 2012] Initial guess for spatial extent in simple fitting = 10.02"
[Mon Mar 26 20:21:45 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.572
[Mon Mar 26 20:21:45 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 10.02"
[Tue Mar 27 05:17:23 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src42.ximg exists
[Tue Mar 27 05:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src42.csv
[Tue Mar 27 05:17:23 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src42_1.ximg exists
[Tue Mar 27 05:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src42.csv
[Tue Mar 27 05:17:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 05:17:25 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Tue Mar 27 05:17:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src42.csv
[Tue Mar 27 05:17:25 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Tue Mar 27 05:17:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src42.csv
[Tue Mar 27 05:17:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:48 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 12.766811 pixels away
[Tue Mar 27 16:18:48 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:18:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:18:48 2012] Assessing source extent using major
[Tue Mar 27 16:18:48 2012] Source does appear to be extended
[Tue Mar 27 16:18:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:19:47 2012] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 16:19:47 2012] Initial guess for spatial extent in simple fitting = 10.02"
[Tue Mar 27 16:19:47 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.572
[Tue Mar 27 16:19:47 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 10.02"
[Wed Mar 28 00:11:51 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src36.ximg exists
[Wed Mar 28 00:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src36.csv
[Wed Mar 28 00:11:51 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src36_1.ximg exists
[Wed Mar 28 00:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src36.csv
[Wed Mar 28 00:11:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 00:11:54 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Wed Mar 28 00:11:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src36.csv
[Wed Mar 28 00:11:54 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Wed Mar 28 00:11:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src36.csv
[Wed Mar 28 00:11:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:40 2012] Warning, spatial fit 36 centroid is now closest to src. 60
[Wed Mar 28 11:27:40 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:27:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:27:40 2012] Assessing source extent using major
[Wed Mar 28 11:27:40 2012] Source does appear to be extended
[Wed Mar 28 11:27:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 11:28:41 2012] XMMSAS src. selection expression = ellipse(33838.000000, 22489.786163, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 11:28:41 2012] Writing source region out to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src42_src.reg
[Wed Mar 28 11:28:41 2012] Extracting stamp from image fullrun_mos1_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (352, 222) - (427, 297)
[Wed Mar 28 11:28:41 2012] XMMSAS bgd. selection expression = annulus(33838.000000, 22489.786163, 1087.500000, 2175.000000, X, Y) && !ellipse(34110.990112, 25429.495667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34045.602051, 24834.169067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34502.110000, 24469.354000, 586.992817, 586.992817, 0.000000, X, Y) && !ellipse(34528.410000, 25308.992000, 736.189621, 736.189621, 0.000000, X, Y) && !ellipse(35149.364105, 23785.732513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34270.408000, 23591.064000, 1191.968034, 1191.968034, 0.000000, X, Y) && !ellipse(33702.155426, 20564.843460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33980.317535, 23185.666687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34645.543091, 22917.094543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34632.368835, 22499.192932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34140.198090, 21189.246613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35398.835968, 24932.500732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34881.816803, 24135.158264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35403.866000, 22462.872800, 1065.760031, 1065.760031, 0.000000, X, Y) && !ellipse(33592.306244, 19530.337845, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 11:28:41 2012] Writing fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src42.gif
[Wed Mar 28 11:59:12 2012] Mean detx,y = (-4443.21, 6891.54) 
[Wed Mar 28 11:59:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 11:59:31 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 11:59:31 2012] Setting source spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Wed Mar 28 11:59:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Wed Mar 28 12:56:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 12:56:47 2012] rmf not generated due to insufficient counts
[Wed Mar 28 16:37:28 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:28 2012] Error reading totcts from fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Wed Mar 28 16:37:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:32 2012] Using photon index=1.80, rate=0.051, arf fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src42.arf
[Wed Mar 28 16:37:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:32 2012] Updating source flux to 9.3e-13
[Wed Mar 28 16:37:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting