[Mon Mar 26 20:16:18 2012] Detection parameters:
  Position = (400.6, 293.7) = 5 34 4.47 21 59 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.9 +/- 20.3
  Background counts = 100.3
  Rate = 0.04 +/- 0.006

[Mon Mar 26 20:16:20 2012] Off-axis axis estimate = 7.41'
[Mon Mar 26 20:21:45 2012] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 20:21:45 2012] Initial guess for spatial extent in simple fitting = 10.14"
[Mon Mar 26 20:21:45 2012] source mask rpix=2.3, npix_max = 32, mask sum = 25, frac = 0.780
[Mon Mar 26 20:21:45 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 10.14"
[Tue Mar 27 05:17:23 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src39.ximg exists
[Tue Mar 27 05:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src39.csv
[Tue Mar 27 05:17:23 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src39_1.ximg exists
[Tue Mar 27 05:17:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src39.csv
[Tue Mar 27 05:17:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 05:17:25 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Tue Mar 27 05:17:25 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Tue Mar 27 05:17:25 2012] Fit fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Tue Mar 27 16:18:47 2012] Source 39 is offset by -1.502942 and -2.208941 pixels which is larger than
2 X fitted extent = 1.134975 x 1.134975, not incorporating fit results
[Tue Mar 27 16:18:48 2012] Source 39 is offset by 1.946913 and -6.092183 pixels which is larger than
2 X fitted extent = 2.673568 x 2.673568, not incorporating fit results
[Tue Mar 27 16:18:48 2012] Spatial fit model total counts = 2045.220000, observed total counts = 2076.000000
[Tue Mar 27 16:18:48 2012] Offset between fit and detection position for source 39 = 3.861395 pixels
[Tue Mar 27 16:18:48 2012] Warning, changing simple spatial fit ID from 39 to 76
[Tue Mar 27 16:18:48 2012] 2036.814500 total counts/ 1950.590000 bgd. counts: snr = 1.952305
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 3.861395 pixels
  Position = (397.4, 291.5) = 5 34 5.45 21 58 57.3
  Extent = 9.2 (6.6-13.4)", rotation angle = 0
  Source counts = 86.2 +/- 45.1
  Background counts = 1950.6
  Rate = 0.01 +/- 0.007
[Tue Mar 27 16:18:48 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:18:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:18:48 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 16:18:48 2012] Source does appear to be extended
[Tue Mar 27 16:18:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:18:48 2012] Source is confused with source 18
[Tue Mar 27 16:19:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 16:19:47 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Tue Mar 27 16:19:47 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.914
[Tue Mar 27 16:19:47 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 9.20"
[Wed Mar 28 00:11:51 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src33.ximg exists
[Wed Mar 28 00:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src33.csv
[Wed Mar 28 00:11:51 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src33_1.ximg exists
[Wed Mar 28 00:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src33.csv
[Wed Mar 28 00:11:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 00:11:54 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Wed Mar 28 00:11:54 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Wed Mar 28 00:11:54 2012] Fit fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Wed Mar 28 11:27:40 2012] Warning, spatial fit 33 centroid is now closest to src. 4
[Wed Mar 28 11:27:40 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:27:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:27:40 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 11:27:40 2012] Source does appear to be extended
[Wed Mar 28 11:27:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 11:28:41 2012] XMMSAS src. selection expression = ellipse(34528.410000, 25308.992000, 552.142216, 552.142216, 0.000000, X, Y)
[Wed Mar 28 11:28:41 2012] Writing source region out to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src39_src.reg
[Wed Mar 28 11:28:41 2012] Extracting stamp from image fullrun_mos1_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (366, 260) - (429, 323)
[Wed Mar 28 11:28:41 2012] XMMSAS bgd. selection expression = annulus(34528.410000, 25308.992000, 920.237026, 1840.474053, X, Y) && !ellipse(34170.932709, 26401.592163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34244.177002, 27705.816895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34110.990112, 25429.495667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34045.602051, 24834.169067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34502.110000, 24469.354000, 586.992817, 586.992817, 0.000000, X, Y) && !ellipse(35149.364105, 23785.732513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34270.408000, 23591.064000, 1191.968034, 1191.968034, 0.000000, X, Y) && !ellipse(33980.317535, 23185.666687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34645.543091, 22917.094543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35398.835968, 24932.500732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34881.816803, 24135.158264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35403.866000, 22462.872800, 1065.760031, 1065.760031, 0.000000, X, Y)
[Wed Mar 28 11:28:41 2012] Writing fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src39.gif
[Wed Mar 28 11:57:53 2012] Mean detx,y = (-1599.12, 7201.57) 
[Wed Mar 28 11:57:55 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 11:58:06 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 11:58:07 2012] Setting source spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed Mar 28 11:58:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Wed Mar 28 12:51:13 2012] Not generating rmf since there are only 86 counts
[Wed Mar 28 12:51:13 2012] rmf not generated due to insufficient counts
[Wed Mar 28 16:37:28 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:28 2012] Error reading totcts from fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed Mar 28 16:37:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:32 2012] Using photon index=1.80, rate=0.0136, arf fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src39.arf
[Wed Mar 28 16:37:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:32 2012] Updating source flux to 2.2e-13
[Wed Mar 28 16:37:47 2012] Flag b found in src. 39 procflags, skipping spectral fitting
[Wed Mar 28 16:37:47 2012] Flag c found in src. 39 procflags, skipping spectral fitting
[Wed Mar 28 16:37:47 2012] Source 39 has fewer than 100.000000 counts, skipping spectral fitting