[Mon Mar 26 20:16:18 2012] Detection parameters:
  Position = (406.5, 377.9) = 5 34 2.58 22 5 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.4 +/- 20.9
  Background counts = 124.9
  Rate = 0.05 +/- 0.006

[Mon Mar 26 20:16:20 2012] Off-axis axis estimate = 9.73'
[Mon Mar 26 20:21:45 2012] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 20:21:45 2012] Initial guess for spatial extent in simple fitting = 11.29"
[Mon Mar 26 20:21:45 2012] source mask rpix=2.6, npix_max = 38, mask sum = 30, frac = 0.783
[Mon Mar 26 20:21:45 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 11.29"
[Tue Mar 27 05:17:22 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src33.ximg exists
[Tue Mar 27 05:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src33.csv
[Tue Mar 27 05:17:22 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Mar 27 05:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src33.csv
[Tue Mar 27 05:17:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 05:17:25 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Mar 27 05:17:25 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Mar 27 05:17:25 2012] Fit fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Mar 27 16:18:48 2012] Warning, spatial fit 33 centroid is now closest to src. 70
[Tue Mar 27 16:18:48 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:18:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:18:48 2012] Assessing source extent using major
[Tue Mar 27 16:18:48 2012] Source does appear to be extended
[Tue Mar 27 16:18:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:18:48 2012] Source is confused with source 56
[Tue Mar 27 16:18:48 2012] Source is confused with source 57
[Tue Mar 27 16:19:47 2012] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 16:19:47 2012] Initial guess for spatial extent in simple fitting = 11.29"
[Tue Mar 27 16:19:47 2012] source mask rpix=2.6, npix_max = 38, mask sum = 30, frac = 0.783
[Tue Mar 27 16:19:47 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 11.29"
[Wed Mar 28 00:11:51 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src28.ximg exists
[Wed Mar 28 00:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src28.csv
[Wed Mar 28 00:11:51 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Mar 28 00:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src28.csv
[Wed Mar 28 00:11:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 00:11:54 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Mar 28 00:11:54 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Mar 28 00:11:54 2012] Fit fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Wed Mar 28 11:27:40 2012] Warning, spatial fit 28 centroid is now closest to src. 57
[Wed Mar 28 11:27:40 2012] Source 33 is offset by -2.621256 and 2.052058 pixels which is larger than
2 X fitted extent = 1.268639 x 1.268639, not incorporating fit results
[Wed Mar 28 11:27:40 2012] Source 33 is offset by -5.590198 and 4.578977 pixels which is larger than
2 X fitted extent = 1.266212 x 1.266212, not incorporating fit results
[Wed Mar 28 11:27:40 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:27:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:27:40 2012] Assessing source extent using major
[Wed Mar 28 11:27:40 2012] Source does appear to be extended
[Wed Mar 28 11:27:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 11:28:41 2012] XMMSAS src. selection expression = ellipse(35318.656738, 32829.057007, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 11:28:41 2012] Writing source region out to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src33_src.reg
[Wed Mar 28 11:28:41 2012] Extracting stamp from image fullrun_mos1_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (369, 340) - (444, 415)
[Wed Mar 28 11:28:41 2012] XMMSAS bgd. selection expression = annulus(35318.656738, 32829.057007, 1087.500000, 2175.000000, X, Y) && !ellipse(34244.532776, 32302.593903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34161.175476, 30665.622314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32225.270000, 34086.408000, 3097.744089, 3097.744089, 0.000000, X, Y) && !ellipse(34441.541260, 31703.236969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34353.975739, 30129.848022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32746.995361, 34834.780304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33729.565948, 34619.348572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33365.967651, 34487.045807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34685.700409, 33450.450684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35634.472000, 33433.702000, 1765.944051, 1765.944051, -0.000000, X, Y) && !ellipse(34439.411926, 31184.446899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33174.082000, 35056.617400, 1777.568051, 1777.568051, 0.000000, X, Y) && !ellipse(34937.211334, 32145.410858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35007.033295, 31012.844391, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 11:28:41 2012] Writing fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src33.gif
[Wed Mar 28 11:56:07 2012] Mean detx,y = (5921.80, 7660.36) 
[Wed Mar 28 11:56:09 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 11:56:22 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 11:56:22 2012] Setting source spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Mar 28 11:56:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed Mar 28 12:50:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 12:50:27 2012] rmf not generated due to insufficient counts
[Wed Mar 28 16:37:28 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:28 2012] Error reading totcts from fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Mar 28 16:37:31 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:31 2012] Using photon index=1.80, rate=0.0495, arf fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src33.arf
[Wed Mar 28 16:37:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:31 2012] Updating source flux to 1e-12
[Wed Mar 28 16:37:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting