[Mon Mar 26 20:16:18 2012] Detection parameters:
  Position = (379.2, 393.0) = 5 34 11.13 22 6 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.0 +/- 23.5
  Background counts = 138.7
  Rate = 0.04 +/- 0.006

[Mon Mar 26 20:16:20 2012] Off-axis axis estimate = 9.01'
[Mon Mar 26 20:21:45 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 20:21:45 2012] Initial guess for spatial extent in simple fitting = 10.94"
[Mon Mar 26 20:21:45 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Mon Mar 26 20:21:45 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 10.94"
[Tue Mar 27 05:17:22 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src32.ximg exists
[Tue Mar 27 05:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src32.csv
[Tue Mar 27 05:17:22 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue Mar 27 05:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src32.csv
[Tue Mar 27 05:17:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 05:17:25 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue Mar 27 05:17:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Mar 27 05:17:25 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Mar 27 05:17:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Mar 27 05:17:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:48 2012] Source 32 is offset by -2.884273 and 7.417574 pixels which is larger than
2 X fitted extent = 1.288455 x 1.288455, not incorporating fit results
[Tue Mar 27 16:18:48 2012] Source 32 is offset by 1.601713 and 4.342214 pixels which is larger than
2 X fitted extent = 1.299113 x 1.299113, not incorporating fit results
[Tue Mar 27 16:18:48 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:18:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:18:48 2012] Assessing source extent using major
[Tue Mar 27 16:18:48 2012] Source does appear to be extended
[Tue Mar 27 16:18:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:18:48 2012] Source is confused with source 53
[Tue Mar 27 16:18:48 2012] Source is confused with source 67
[Tue Mar 27 16:19:47 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 16:19:47 2012] Initial guess for spatial extent in simple fitting = 10.94"
[Tue Mar 27 16:19:47 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Tue Mar 27 16:19:47 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 10.94"
[Wed Mar 28 00:11:51 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src27.ximg exists
[Wed Mar 28 00:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src27.csv
[Wed Mar 28 00:11:51 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Mar 28 00:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src27.csv
[Wed Mar 28 00:11:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 00:11:53 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Mar 28 00:11:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed Mar 28 00:11:54 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Mar 28 00:11:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed Mar 28 00:11:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:39 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 11.136571 pixels away
[Wed Mar 28 11:27:40 2012] Source 32 is offset by 5.654026 and 3.186792 pixels which is larger than
2 X fitted extent = 4.958345 x 4.958345, not incorporating fit results
[Wed Mar 28 11:27:40 2012] Spatial fit model total counts = 6995.080000, observed total counts = 6516.000000
[Wed Mar 28 11:27:40 2012] Offset between fit and detection position for source 32 = 8.271496 pixels
[Wed Mar 28 11:27:40 2012] Warning, changing simple spatial fit ID from 27 to 58
[Wed Mar 28 11:27:40 2012] 6921.130000 total counts/ 5709.690000 bgd. counts: snr = 16.032293
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 8.271496 pixels
  Position = (371.0, 392.4) = 5 34 13.71 22 6 16.2
  Extent = 38.7 (30.4-44.4)", rotation angle = 0
  Source counts = 1211.4 +/- 83.2
  Background counts = 5709.7
  Rate = 0.2 +/- 0.01
[Wed Mar 28 11:27:40 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:27:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:27:40 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 11:27:40 2012] Source does appear to be extended
[Wed Mar 28 11:27:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 11:28:41 2012] Counts = 1211.440000, rescaling region sizes by 2.000000
[Wed Mar 28 11:28:41 2012] XMMSAS src. selection expression = ellipse(32225.270000, 34086.408000, 4646.616134, 4646.616134, 0.000000, X, Y)
[Wed Mar 28 11:28:41 2012] Writing source region out to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src32_src.reg
[Wed Mar 28 11:28:41 2012] Extracting stamp from image fullrun_mos1_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (104, 125) - (595, 595)
[Wed Mar 28 11:28:41 2012] XMMSAS bgd. selection expression = annulus(32225.270000, 34086.408000, 15488.720446, 30977.440891, X, Y) && !ellipse(28871.334930, 34120.545563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31435.896759, 34045.365753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34170.932709, 26401.592163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27856.968000, 34322.734000, 1996.912057, 1996.912057, 0.000000, X, Y) && !ellipse(28309.913055, 34312.533386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25993.054840, 34300.721161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27119.769623, 34307.087921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31033.123505, 34046.178192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30383.982117, 34048.750916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34244.532776, 32302.593903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34161.175476, 30665.622314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34338.085388, 29706.299164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.005310, 28737.508179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34388.318542, 28304.568481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34244.177002, 27705.816895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34110.990112, 25429.495667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34045.602051, 24834.169067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34502.110000, 24469.354000, 586.992817, 586.992817, 0.000000, X, Y) && !ellipse(28155.462000, 41950.247000, 1692.576049, 1692.576049, 0.000000, X, Y) && !ellipse(28021.601800, 40081.070000, 1947.600056, 1947.600056, 0.000000, X, Y) && !ellipse(28276.210114, 40584.886108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27975.947540, 39546.060760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28479.663000, 34992.688800, 998.456029, 998.456029, 0.000000, X, Y) && !ellipse(28930.414642, 34546.335266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35318.656738, 32829.057007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34441.541260, 31703.236969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34353.975739, 30129.848022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34511.923431, 29186.617004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34528.410000, 25308.992000, 736.189621, 736.189621, 0.000000, X, Y) && !ellipse(35149.364105, 23785.732513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34270.408000, 23591.064000, 1191.968034, 1191.968034, 0.000000, X, Y) && !ellipse(33838.000000, 22489.786163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.512000, 42626.408000, 2197.128063, 2197.128063, 0.000000, X, Y) && !ellipse(27766.692400, 41629.486000, 2127.840061, 2127.840061, 0.000000, X, Y) && !ellipse(27390.911835, 39708.118439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27752.654000, 36697.918000, 1791.832052, 1791.832052, 0.000000, X, Y) && !ellipse(27913.511871, 35528.518219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32746.995361, 34834.780304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33702.155426, 20564.843460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33729.565948, 34619.348572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33365.967651, 34487.045807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26269.005310, 34394.433075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34685.700409, 33450.450684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35634.472000, 33433.702000, 1765.944051, 1765.944051, -0.000000, X, Y) && !ellipse(34439.411926, 31184.446899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33980.317535, 23185.666687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34645.543091, 22917.094543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34632.368835, 22499.192932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28077.183807, 37879.674103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27805.098800, 36976.164000, 1228.056035, 1228.056035, 0.000000, X, Y) && !ellipse(32002.801270, 35213.777771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33174.082000, 35056.617400, 1777.568051, 1777.568051, 0.000000, X, Y) && !ellipse(30652.765800, 34806.092000, 2068.416060, 592.655217, 269.902400, X, Y) && !ellipse(30495.262000, 34568.962000, 1004.792029, 1004.792029, 0.000000, X, Y) && !ellipse(34140.198090, 21189.246613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34937.211334, 32145.410858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35007.033295, 31012.844391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35980.972382, 29337.016449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35398.835968, 24932.500732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19787.969940, 24457.372620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34881.816803, 24135.158264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35403.866000, 22462.872800, 1065.760031, 1065.760031, 0.000000, X, Y) && !ellipse(33592.306244, 19530.337845, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 11:28:41 2012] Writing fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src32.gif
[Wed Mar 28 11:42:04 2012] Mean detx,y = (7701.31, 4440.01) 
[Wed Mar 28 11:42:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 11:55:59 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 11:55:59 2012] Setting source spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Mar 28 11:55:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed Mar 28 16:37:28 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:28 2012] Error reading totcts from fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Mar 28 16:37:31 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:31 2012] Using photon index=1.80, rate=0.192, arf fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src32.arf
[Wed Mar 28 16:37:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:31 2012] Updating source flux to 3e-12
[Wed Mar 28 16:37:47 2012] Flag b found in src. 32 procflags, skipping spectral fitting
[Wed Mar 28 16:37:47 2012] Flag c found in src. 32 procflags, skipping spectral fitting