[Mon Mar 26 20:16:17 2012] Detection parameters:
  Position = (320.6, 416.0) = 5 34 29.46 22 8 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.4 +/- 24.9
  Background counts = 205.6
  Rate = 0.04 +/- 0.006

[Mon Mar 26 20:16:20 2012] Off-axis axis estimate = 8.68'
[Mon Mar 26 20:21:45 2012] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 20:21:45 2012] Initial guess for spatial extent in simple fitting = 10.77"
[Mon Mar 26 20:21:45 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.017
[Mon Mar 26 20:21:45 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 10.77"
[Tue Mar 27 05:17:22 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src28.ximg exists
[Tue Mar 27 05:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src28.csv
[Tue Mar 27 05:17:22 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue Mar 27 05:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src28.csv
[Tue Mar 27 05:17:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 05:17:25 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue Mar 27 05:17:25 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Mar 27 05:17:25 2012] Fit fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Tue Mar 27 16:18:48 2012] Warning, spatial fit 28 centroid is now closest to src. 29
[Tue Mar 27 16:18:48 2012] Spatial fit model total counts = 3311.380000, observed total counts = 3308.000000
[Tue Mar 27 16:18:48 2012] Offset between fit and detection position for source 28 = 0.393649 pixels
[Tue Mar 27 16:18:48 2012] Warning, changing simple spatial fit ID from 28 to 49
[Tue Mar 27 16:18:48 2012] 3194.920600 total counts/ 3160.270000 bgd. counts: snr = 0.616380
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.393649 pixels
  Position = (320.6, 416.4) = 5 34 29.48 22 8 1.0
  Extent = 2.6" x 2.6", rotation angle = 0
  Source counts = 34.7 +/- 56.5
  Background counts = 3160.3
  Rate = 0.005 +/- 0.009
  Deleting source due to low Poisson probability