[Mon Mar 26 20:16:17 2012] Detection parameters:
  Position = (324.4, 482.0) = 5 34 28.27 22 12 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.9 +/- 19.1
  Background counts = 54.8
  Rate = 0.02 +/- 0.003

[Mon Mar 26 20:16:20 2012] Off-axis axis estimate = 13.44'
[Mon Mar 26 20:21:45 2012] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 20:21:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 26 20:21:45 2012] Initial guess for spatial extent in simple fitting = 13.15"
[Mon Mar 26 20:21:45 2012] source mask rpix=3.0, npix_max = 49, mask sum = 56, frac = 1.128
[Mon Mar 26 20:21:45 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 13.15"
[Tue Mar 27 05:17:22 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src24.ximg exists
[Tue Mar 27 05:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src24.csv
[Tue Mar 27 05:17:22 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src24_1.ximg exists
[Tue Mar 27 05:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src24.csv
[Tue Mar 27 05:17:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 05:17:25 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Tue Mar 27 05:17:25 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Tue Mar 27 05:17:25 2012] Fit fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Tue Mar 27 16:18:48 2012] Spatial fit model total counts = 1596.560000, observed total counts = 1594.000000
[Tue Mar 27 16:18:48 2012] Offset between fit and detection position for source 24 = 0.758383 pixels
[Tue Mar 27 16:18:48 2012] 1358.883000 total counts/ 1054.660000 bgd. counts: snr = 9.367761
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.758383 pixels
  Position = (324.2, 482.7) = 5 34 28.34 22 12 49.5
  Extent = 21.2 (10.9-26.3)", rotation angle = 0
  Source counts = 304.2 +/- 36.9
  Background counts = 1054.7
  Rate = 0.05 +/- 0.006
[Tue Mar 27 16:18:48 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:18:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:18:48 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 16:18:48 2012] Source does appear to be extended
[Tue Mar 27 16:18:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:18:48 2012] Source is confused with source 21
[Tue Mar 27 16:19:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 16:19:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 16:19:47 2012] Initial guess for spatial extent in simple fitting = 21.16"
[Tue Mar 27 16:19:47 2012] source mask rpix=4.9, npix_max = 115, mask sum = 121, frac = 1.051
[Tue Mar 27 16:19:47 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 21.16"
[Wed Mar 28 00:11:51 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src21.ximg exists
[Wed Mar 28 00:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src21.csv
[Wed Mar 28 00:11:51 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src21_1.ximg exists
[Wed Mar 28 00:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src21.csv
[Wed Mar 28 00:11:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 00:11:53 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Wed Mar 28 00:11:53 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Wed Mar 28 00:11:53 2012] Fit fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Wed Mar 28 11:27:40 2012] Warning, spatial fit 21 centroid is now closest to src. 26
[Wed Mar 28 11:27:40 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:27:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:27:40 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 11:27:40 2012] Source does appear to be extended
[Wed Mar 28 11:27:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 11:28:40 2012] XMMSAS src. selection expression = ellipse(28155.462000, 41950.247000, 1269.432037, 1269.432037, 0.000000, X, Y)
[Wed Mar 28 11:28:40 2012] Writing source region out to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src24_src.reg
[Wed Mar 28 11:28:40 2012] Extracting stamp from image fullrun_mos1_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (251, 410) - (397, 556)
[Wed Mar 28 11:28:40 2012] XMMSAS bgd. selection expression = annulus(28155.462000, 41950.247000, 2115.720061, 4231.440122, X, Y) && !ellipse(28021.601800, 40081.070000, 1947.600056, 1947.600056, 0.000000, X, Y) && !ellipse(28276.210114, 40584.886108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27975.947540, 39546.060760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.512000, 42626.408000, 2197.128063, 2197.128063, 0.000000, X, Y) && !ellipse(27766.692400, 41629.486000, 2127.840061, 2127.840061, 0.000000, X, Y) && !ellipse(27390.911835, 39708.118439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27752.654000, 36697.918000, 1791.832052, 1791.832052, 0.000000, X, Y) && !ellipse(28077.183807, 37879.674103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27805.098800, 36976.164000, 1228.056035, 1228.056035, 0.000000, X, Y)
[Wed Mar 28 11:28:40 2012] Writing fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src24.gif
[Wed Mar 28 11:38:39 2012] Mean detx,y = (14637.32, 30.13) 
[Wed Mar 28 11:38:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 11:39:32 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 11:39:32 2012] Setting source spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Wed Mar 28 11:39:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Wed Mar 28 16:37:27 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:27 2012] Error reading totcts from fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Wed Mar 28 16:37:31 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:31 2012] Using photon index=1.80, rate=0.0481, arf fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src24.arf
[Wed Mar 28 16:37:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:31 2012] Updating source flux to 1.2e-12
[Wed Mar 28 16:37:47 2012] Flag c found in src. 24 procflags, skipping spectral fitting