[Mon Mar 26 20:16:17 2012] Detection parameters:
  Position = (393.2, 353.0) = 5 34 6.75 22 3 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 242.2 +/- 23.6
  Background counts = 159.9
  Rate = 0.06 +/- 0.006

[Mon Mar 26 20:16:20 2012] Off-axis axis estimate = 7.93'
[Mon Mar 26 20:21:45 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 20:21:45 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Mon Mar 26 20:21:45 2012] source mask rpix=2.4, npix_max = 33, mask sum = 18, frac = 0.539
[Mon Mar 26 20:21:45 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.39"
[Tue Mar 27 05:17:22 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src13.ximg exists
[Tue Mar 27 05:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src13.csv
[Tue Mar 27 05:17:22 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Mar 27 05:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src13.csv
[Tue Mar 27 05:17:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 05:17:24 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Mar 27 05:17:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Mar 27 05:17:24 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Mar 27 05:17:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Mar 27 05:17:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 16:18:47 2012] Spatial fit model total counts = 3447.350000, observed total counts = 1810.000000
[Tue Mar 27 16:18:47 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 27 16:18:48 2012] Source 13 is offset by -1.358358 and -0.077192 pixels which is larger than
2 X fitted extent = 1.218846 x 1.218846, not incorporating fit results
[Tue Mar 27 16:18:48 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 16:18:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 16:18:48 2012] Assessing source extent using major
[Tue Mar 27 16:18:48 2012] Source does appear to be extended
[Tue Mar 27 16:18:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 16:18:48 2012] Source is confused with source 36
[Tue Mar 27 16:18:48 2012] Source is confused with source 58
[Tue Mar 27 16:19:47 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 16:19:47 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Tue Mar 27 16:19:47 2012] source mask rpix=2.4, npix_max = 33, mask sum = 18, frac = 0.539
[Tue Mar 27 16:19:47 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.39"
[Wed Mar 28 00:11:51 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src11.ximg exists
[Wed Mar 28 00:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src11.csv
[Wed Mar 28 00:11:51 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Mar 28 00:11:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src11.csv
[Wed Mar 28 00:11:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 00:11:53 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Mar 28 00:11:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed Mar 28 00:11:53 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Mar 28 00:11:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed Mar 28 00:11:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 11:27:39 2012] Source 13 is offset by 6.251488 and -1.740684 pixels which is larger than
2 X fitted extent = 1.160823 x 1.160823, not incorporating fit results
[Wed Mar 28 11:27:40 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 11:27:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 11:27:40 2012] Assessing source extent using major
[Wed Mar 28 11:27:40 2012] Source does appear to be extended
[Wed Mar 28 11:27:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 11:28:39 2012] XMMSAS src. selection expression = ellipse(34161.175476, 30665.622314, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 11:28:39 2012] Writing source region out to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src13_src.reg
[Wed Mar 28 11:28:39 2012] Extracting stamp from image fullrun_mos1_xmm0611180701_pi300-10000_cl_sm2.00.img.gz, (356, 316) - (431, 391)
[Wed Mar 28 11:28:40 2012] XMMSAS bgd. selection expression = annulus(34161.175476, 30665.622314, 1087.500000, 2175.000000, X, Y) && !ellipse(34244.532776, 32302.593903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34338.085388, 29706.299164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.005310, 28737.508179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34388.318542, 28304.568481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34244.177002, 27705.816895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32225.270000, 34086.408000, 3097.744089, 3097.744089, 0.000000, X, Y) && !ellipse(35318.656738, 32829.057007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34441.541260, 31703.236969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34353.975739, 30129.848022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34511.923431, 29186.617004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34685.700409, 33450.450684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35634.472000, 33433.702000, 1765.944051, 1765.944051, -0.000000, X, Y) && !ellipse(34439.411926, 31184.446899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30652.765800, 34806.092000, 2068.416060, 592.655217, 269.902400, X, Y) && !ellipse(34937.211334, 32145.410858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35007.033295, 31012.844391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35980.972382, 29337.016449, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 11:28:40 2012] Writing fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src13.gif
[Wed Mar 28 11:34:11 2012] Mean detx,y = (3707.71, 6845.77) 
[Wed Mar 28 11:34:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 11:34:37 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 11:34:37 2012] Setting source spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Mar 28 11:34:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Mar 28 12:22:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 12:22:48 2012] rmf not generated due to insufficient counts
[Wed Mar 28 16:37:27 2012] Updating aperture counts using extracted products
[Wed Mar 28 16:37:27 2012] Error reading totcts from fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Mar 28 16:37:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 16:37:30 2012] Using photon index=1.80, rate=0.0648, arf fullrun_mos1_xmm0611180701_pi300-10000_pass1_cl_src13.arf
[Wed Mar 28 16:37:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 16:37:30 2012] Updating source flux to 1.2e-12
[Wed Mar 28 16:37:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting