[Mon Mar 26 20:16:16 2012] Detection parameters:
  Position = (403.6, 337.0) = 5 34 3.51 22 2 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1474.5 +/- 203.9
  Background counts = 162.6
  Rate = 0.4 +/- 0.05

[Mon Mar 26 20:16:20 2012] Off-axis axis estimate = 8.12'
[Mon Mar 26 20:21:45 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 20:21:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 26 20:21:45 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Mon Mar 26 20:21:45 2012] source mask rpix=2.4, npix_max = 33, mask sum = 20, frac = 0.590
[Mon Mar 26 20:21:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.49"
[Tue Mar 27 05:17:22 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 27 05:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 05:17:22 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 27 05:17:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 05:17:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 05:17:24 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 27 05:17:24 2012] fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 27 05:17:24 2012] Fit fullrun_mos1_xmm0611180701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 27 16:18:47 2012] Spatial fit model total counts = 4872.490000, observed total counts = 4605.000000
[Tue Mar 27 16:18:47 2012] Offset between fit and detection position for source 1 = 3.643140 pixels
[Tue Mar 27 16:18:47 2012] 4749.127700 total counts/ 4669.010000 bgd. counts: snr = 1.172509
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.643140 pixels
  Position = (401.0, 334.5) = 5 34 4.33 22 2 4.3
  Extent = 8.7 (2.6-21.0)", rotation angle = 0
  Source counts = 80.1 +/- 68.9
  Background counts = 4669.0
  Rate = 0.01 +/- 0.01
  Deleting source due to low Poisson probability