[Mon Dec 26 10:37:22 2011] Detection parameters:
  Position = (207.4, 304.9) = 5 34 56.09 22 2 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 421.8 +/- 31.0
  Background counts = 510.9
  Rate = 0.05 +/- 0.004

[Mon Dec 26 10:37:26 2011] Off-axis axis estimate = 6.61'
[Tue Dec 27 03:02:54 2011] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 03:02:54 2011] Initial guess for spatial extent in simple fitting = 9.74"
[Tue Dec 27 03:02:54 2011] source mask rpix=2.2, npix_max = 29, mask sum = 18, frac = 0.600
[Tue Dec 27 03:02:54 2011] Giving source the simple spatial ID 36 for pass 0, mean size = 9.74"
[Wed Dec 28 10:32:27 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src36.ximg exists
[Wed Dec 28 10:32:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src36.csv
[Wed Dec 28 10:32:27 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src36_1.ximg exists
[Wed Dec 28 10:32:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src36.csv
[Wed Dec 28 10:32:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:32:30 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Wed Dec 28 10:32:30 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Wed Dec 28 10:32:30 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Wed Dec 28 10:34:33 2011] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 81 at 11.559245 pixels away
[Wed Dec 28 10:34:34 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:34:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:34:34 2011] Assessing source extent using major
[Wed Dec 28 10:34:34 2011] Source does appear to be extended
[Wed Dec 28 10:34:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:34:35 2011] Source is confused with source 84
[Thu Dec 29 05:24:34 2011] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 05:24:34 2011] Initial guess for spatial extent in simple fitting = 9.74"
[Thu Dec 29 05:24:34 2011] source mask rpix=2.2, npix_max = 29, mask sum = 18, frac = 0.600
[Thu Dec 29 05:24:34 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 9.74"
[Fri Dec 30 17:13:57 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src27.ximg exists
[Fri Dec 30 17:13:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src27.csv
[Fri Dec 30 17:13:57 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Dec 30 17:13:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src27.csv
[Fri Dec 30 17:13:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 17:14:00 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Dec 30 17:14:00 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Dec 30 17:14:00 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Dec 30 17:15:15 2011] Warning, spatial fit 27 centroid is now closest to src. 78
[Fri Dec 30 17:15:15 2011] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 81 at 21.326209 pixels away
[Fri Dec 30 17:15:16 2011] Source 81 is offset by 3.001931 and 5.820080 pixels which is larger than
2 X fitted extent = 1.178920 x 1.178920, not incorporating fit results
[Fri Dec 30 17:15:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:15:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:15:16 2011] Assessing source extent using major
[Fri Dec 30 17:15:16 2011] Source does appear to be extended
[Fri Dec 30 17:15:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 00:18:34 2011] XMMSAS src. selection expression = ellipse(17999.428040, 26475.794922, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 31 00:18:34 2011] Writing source region out to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src81_src.reg
[Sat Dec 31 00:18:34 2011] Extracting stamp from image fullrun_mos2_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (170, 267) - (245, 342)
[Sat Dec 31 00:18:34 2011] XMMSAS bgd. selection expression = annulus(17999.428040, 26475.794922, 1087.500000, 2175.000000, X, Y) && !ellipse(17860.665588, 23739.057098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17745.278015, 24920.930115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17783.435800, 25448.964000, 1004.480029, 1004.480029, 0.000000, X, Y) && !ellipse(17759.489059, 28652.510071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17802.609200, 28211.468000, 1602.104046, 1602.104046, 0.000000, X, Y) && !ellipse(17873.498672, 27791.646027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17189.369308, 25091.651154, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 31 00:18:34 2011] Writing fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src81.gif
[Sat Dec 31 01:44:37 2011] Mean detx,y = (-6965.24, -1709.79) 
[Sat Dec 31 01:44:39 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 01:44:59 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 01:44:59 2011] Setting source spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Sat Dec 31 01:44:59 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Sat Dec 31 06:10:44 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 31 06:10:44 2011] rmf not generated due to insufficient counts
[Sat Dec 31 09:27:27 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:27 2011] Error reading totcts from fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Sat Dec 31 09:27:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:33 2011] Using photon index=1.80, rate=0.0495, arf fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src81.arf
[Sat Dec 31 09:27:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:33 2011] Updating source flux to 1.2e-12
[Sat Dec 31 09:38:05 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting