[Mon Dec 26 10:37:21 2011] Detection parameters:
  Position = (351.2, 359.0) = 5 34 11.11 22 6 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.3 +/- 35.4
  Background counts = 425.8
  Rate = 0.008 +/- 0.002

[Mon Dec 26 10:37:26 2011] Off-axis axis estimate = 5.83'
[Tue Dec 27 03:02:55 2011] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 03:02:55 2011] Initial guess for spatial extent in simple fitting = 9.34"
[Tue Dec 27 03:02:55 2011] source mask rpix=2.1, npix_max = 28, mask sum = 25, frac = 0.892
[Tue Dec 27 03:02:55 2011] Giving source the simple spatial ID 114 for pass 0, mean size = 9.34"
[Wed Dec 28 10:34:34 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:34:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:34:34 2011] Assessing source extent using major
[Wed Dec 28 10:34:35 2011] Source does appear to be extended
[Wed Dec 28 10:34:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 05:24:34 2011] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 05:24:34 2011] Initial guess for spatial extent in simple fitting = 9.34"
[Thu Dec 29 05:24:34 2011] source mask rpix=2.1, npix_max = 28, mask sum = 25, frac = 0.892
[Thu Dec 29 05:24:34 2011] Giving source the simple spatial ID 100 for pass 1, mean size = 9.34"
[Fri Dec 30 17:13:59 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src100.ximg exists
[Fri Dec 30 17:14:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src100.csv
[Fri Dec 30 17:14:00 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src100_1.ximg exists
[Fri Dec 30 17:14:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src100.csv
[Fri Dec 30 17:14:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 17:14:02 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src100.ximg exists
[Fri Dec 30 17:14:03 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src100_1.ximg exists
[Fri Dec 30 17:14:03 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src100 appears to have run properly
[Fri Dec 30 17:15:16 2011] Source 71 is offset by 8.282206 and -2.210007 pixels which is larger than
2 X fitted extent = 1.607370 x 1.607370, not incorporating fit results
[Fri Dec 30 17:15:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:15:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:15:16 2011] Assessing source extent using major
[Fri Dec 30 17:15:16 2011] Source does appear to be extended
[Fri Dec 30 17:15:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 17:15:16 2011] Source is confused with source 66
[Sat Dec 31 00:18:40 2011] XMMSAS src. selection expression = ellipse(30505.247925, 31188.280762, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 31 00:18:40 2011] Writing source region out to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src71_src.reg
[Sat Dec 31 00:18:40 2011] Extracting stamp from image fullrun_mos2_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (314, 322) - (389, 397)
[Sat Dec 31 00:18:40 2011] XMMSAS bgd. selection expression = annulus(30505.247925, 31188.280762, 1087.500000, 2175.000000, X, Y) && !ellipse(27022.181000, 31400.967800, 1405.848040, 1405.848040, 0.000000, X, Y) && !ellipse(31752.617859, 28234.725281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27894.550000, 31357.128800, 1419.368041, 1419.368041, 0.000000, X, Y) && !ellipse(27040.404000, 31857.876000, 1370.104039, 1370.104039, 0.000000, X, Y) && !ellipse(28490.272000, 31284.657200, 1426.120041, 1426.120041, 0.000000, X, Y) && !ellipse(27524.781067, 32051.486542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29465.310289, 31190.991292, 3018.512087, 1200.625624, 7.815578, X, Y) && !ellipse(31584.907623, 28730.671478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28942.996000, 31311.115400, 1455.920042, 1455.920042, 0.000000, X, Y)
[Sat Dec 31 00:18:40 2011] Writing fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src71.gif
[Sat Dec 31 04:36:51 2011] Mean detx,y = (5450.91, -7254.91) 
[Sat Dec 31 04:36:53 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 04:37:29 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 04:37:29 2011] Setting source spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Sat Dec 31 04:37:29 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Sat Dec 31 09:25:43 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 31 09:25:43 2011] rmf not generated due to insufficient counts
[Sat Dec 31 09:27:32 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:32 2011] Error reading totcts from fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Sat Dec 31 09:27:38 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:38 2011] Using photon index=1.80, rate=0.00784, arf fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src71.arf
[Sat Dec 31 09:27:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:38 2011] Updating source flux to 1.6e-13
[Sat Dec 31 09:38:05 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting