[Mon Dec 26 10:37:19 2011] Detection parameters:
  Position = (302.0, 378.0) = 5 34 26.50 22 7 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 551.6 +/- 40.7
  Background counts = 360.8
  Rate = 0.07 +/- 0.005

[Mon Dec 26 10:37:26 2011] Off-axis axis estimate = 5.77'
[Tue Dec 27 03:02:54 2011] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 03:02:54 2011] Initial guess for spatial extent in simple fitting = 9.31"
[Tue Dec 27 03:02:54 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.075
[Tue Dec 27 03:02:54 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 9.31"
[Wed Dec 28 10:32:26 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src18.ximg exists
[Wed Dec 28 10:32:26 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Dec 28 10:32:26 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src18 appears to have run properly
[Wed Dec 28 10:32:29 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Dec 28 10:32:29 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Dec 28 10:32:29 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Dec 28 10:34:32 2011] Source 50 is offset by 4.088691 and 6.077403 pixels which is larger than
2 X fitted extent = 8.564506 x 2.095264, not incorporating fit results
[Wed Dec 28 10:34:34 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:34:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:34:34 2011] Assessing source extent using major
[Wed Dec 28 10:34:34 2011] Source does appear to be extended
[Wed Dec 28 10:34:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:34:35 2011] Source is confused with source 51
[Wed Dec 28 10:34:35 2011] Source is confused with source 48
[Thu Dec 29 05:24:34 2011] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 05:24:34 2011] Initial guess for spatial extent in simple fitting = 9.31"
[Thu Dec 29 05:24:34 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.075
[Thu Dec 29 05:24:34 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 9.31"
[Fri Dec 30 17:13:57 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src15.ximg exists
[Fri Dec 30 17:13:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src15.csv
[Fri Dec 30 17:13:57 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri Dec 30 17:13:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src15.csv
[Fri Dec 30 17:13:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 17:14:00 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri Dec 30 17:14:00 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Dec 30 17:14:00 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Dec 30 17:15:15 2011] Warning, spatial fit 15 centroid is now closest to src. 60
[Fri Dec 30 17:15:15 2011] Source 50 is offset by -9.102781 and 1.060392 pixels which is larger than
2 X fitted extent = 2.049021 x 2.049021, not incorporating fit results
[Fri Dec 30 17:15:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:15:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:15:16 2011] Assessing source extent using major
[Fri Dec 30 17:15:16 2011] Source does appear to be extended
[Fri Dec 30 17:15:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 00:18:32 2011] XMMSAS src. selection expression = ellipse(26225.938080, 32833.374084, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 31 00:18:32 2011] Writing source region out to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src50_src.reg
[Sat Dec 31 00:18:32 2011] Extracting stamp from image fullrun_mos2_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (265, 340) - (340, 415)
[Sat Dec 31 00:18:32 2011] XMMSAS bgd. selection expression = annulus(26225.938080, 32833.374084, 1087.500000, 2175.000000, X, Y) && !ellipse(25557.082800, 31450.983200, 1648.320047, 712.525621, 7.649290, X, Y) && !ellipse(24278.353800, 31473.056400, 1648.320047, 677.736820, 2.653500, X, Y) && !ellipse(23795.998000, 31525.263600, 1440.760041, 1440.760041, 0.000000, X, Y) && !ellipse(26164.788400, 31414.006600, 1399.360040, 1399.360040, 0.000000, X, Y) && !ellipse(23363.130000, 31344.942000, 1479.032043, 1479.032043, 0.000000, X, Y) && !ellipse(25653.548000, 33347.220000, 1302.664037, 1302.664037, 0.000000, X, Y) && !ellipse(27022.181000, 31400.967800, 1405.848040, 1405.848040, 0.000000, X, Y) && !ellipse(23832.858600, 32687.187600, 1705.904049, 1705.904049, 0.000000, X, Y) && !ellipse(23695.430000, 32447.302000, 857.744025, 857.744025, 0.000000, X, Y) && !ellipse(26730.914000, 31925.156000, 1462.776042, 1462.776042, 0.000000, X, Y) && !ellipse(27894.550000, 31357.128800, 1419.368041, 1419.368041, 0.000000, X, Y) && !ellipse(25312.546936, 34047.728729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24504.238000, 33597.600000, 1218.368035, 1218.368035, 0.000000, X, Y) && !ellipse(27040.404000, 31857.876000, 1370.104039, 1370.104039, 0.000000, X, Y) && !ellipse(28490.272000, 31284.657200, 1426.120041, 1426.120041, 0.000000, X, Y) && !ellipse(27524.781067, 32051.486542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25312.000000, 34576.613220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29465.310289, 31190.991292, 3018.512087, 1200.625624, 7.815578, X, Y) && !ellipse(28942.996000, 31311.115400, 1455.920042, 1455.920042, 0.000000, X, Y)
[Sat Dec 31 00:18:32 2011] Writing fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src50.gif
[Sat Dec 31 01:01:34 2011] Mean detx,y = (1078.97, -8536.21) 
[Sat Dec 31 01:01:37 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 01:01:51 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 01:01:51 2011] Setting source spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat Dec 31 01:01:51 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Sat Dec 31 05:19:43 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 31 05:19:43 2011] rmf not generated due to insufficient counts
[Sat Dec 31 09:27:26 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:26 2011] Error reading totcts from fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Sat Dec 31 09:27:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:33 2011] Using photon index=1.80, rate=0.0651, arf fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src50.arf
[Sat Dec 31 09:27:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:33 2011] Updating source flux to 1.1e-12
[Sat Dec 31 09:38:05 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting