[Mon Dec 26 10:37:18 2011] Detection parameters:
  Position = (277.2, 92.1) = 5 34 34.26 21 47 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 589.2 +/- 35.4
  Background counts = 112.5
  Rate = 0.04 +/- 0.002

[Mon Dec 26 10:37:26 2011] Off-axis axis estimate = 15.04'
[Tue Dec 27 03:02:54 2011] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 03:02:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 27 03:02:54 2011] Initial guess for spatial extent in simple fitting = 13.95"
[Tue Dec 27 03:02:54 2011] source mask rpix=3.2, npix_max = 54, mask sum = 57, frac = 1.037
[Tue Dec 27 03:02:54 2011] Giving source the simple spatial ID 48 for pass 0, mean size = 13.95"
[Wed Dec 28 10:32:27 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src48.ximg exists
[Wed Dec 28 10:32:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src48.csv
[Wed Dec 28 10:32:27 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src48_1.ximg exists
[Wed Dec 28 10:32:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src48.csv
[Wed Dec 28 10:32:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:32:32 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Wed Dec 28 10:32:32 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Wed Dec 28 10:32:32 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Wed Dec 28 10:34:33 2011] Warning, spatial fit 48 centroid is now closest to src. 7
[Wed Dec 28 10:34:34 2011] Spatial fit model total counts = 2819.930000, observed total counts = 3106.000000
[Wed Dec 28 10:34:34 2011] Offset between fit and detection position for source 38 = 2.532185 pixels
[Wed Dec 28 10:34:34 2011] Warning, changing simple spatial fit ID from 48 to 89
[Wed Dec 28 10:34:34 2011] 3009.600000 total counts/ 1412.350000 bgd. counts: snr = 42.501253
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 2.532185 pixels
  Position = (279.2, 93.6) = 5 34 33.63 21 47 25.2
  Extent = 17.8 (17.3-18.0)", rotation angle = 0
  Source counts = 1597.2 +/- 54.9
  Background counts = 1412.3
  Rate = 0.1 +/- 0.004
[Wed Dec 28 10:34:34 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:34:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:34:34 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 10:34:34 2011] Source does appear to be extended
[Wed Dec 28 10:34:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:34:35 2011] Source is confused with source 2
[Thu Dec 29 05:24:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 29 05:24:34 2011] Initial guess for spatial extent in simple fitting = 17.78"
[Thu Dec 29 05:24:34 2011] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.962
[Thu Dec 29 05:24:34 2011] Giving source the simple spatial ID 38 for pass 1, mean size = 17.78"
[Fri Dec 30 17:13:58 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src38.ximg exists
[Fri Dec 30 17:13:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src38.csv
[Fri Dec 30 17:13:58 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src38_1.ximg exists
[Fri Dec 30 17:13:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src38.csv
[Fri Dec 30 17:13:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 17:14:01 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Fri Dec 30 17:14:01 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Fri Dec 30 17:14:01 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Fri Dec 30 17:15:15 2011] Warning, spatial fit 38 centroid is now closest to src. 35
[Fri Dec 30 17:15:16 2011] Spatial fit model total counts = 2421.260000, observed total counts = 2708.000000
[Fri Dec 30 17:15:16 2011] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Dec 30 17:15:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:15:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:15:16 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 17:15:16 2011] Source does appear to be extended
[Fri Dec 30 17:15:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 00:18:35 2011] Counts = 1597.250000, rescaling region sizes by 2.000000
[Sat Dec 31 00:18:35 2011] XMMSAS src. selection expression = ellipse(24242.424000, 8096.262800, 2133.804061, 2133.804061, 0.000000, X, Y)
[Sat Dec 31 00:18:35 2011] Writing source region out to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src38_src.reg
[Sat Dec 31 00:18:35 2011] Extracting stamp from image fullrun_mos2_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (157, 0) - (402, 216)
[Sat Dec 31 00:18:35 2011] XMMSAS bgd. selection expression = annulus(24242.424000, 8096.262800, 7112.680205, 14225.360409, X, Y) && !ellipse(24731.540400, 17435.082000, 567.880816, 567.880816, 0.000000, X, Y) && !ellipse(23982.828613, 17378.274643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31503.504425, 22488.931244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24602.846000, 16885.512000, 575.788817, 575.788817, 0.000000, X, Y) && !ellipse(23181.508878, 17451.473980, 1401.968040, 1401.968040, 0.000000, X, Y) && !ellipse(25689.529236, 17448.794876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21917.250336, 17465.733963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17571.842000, 21877.118000, 1625.140519, 1625.140519, 0.000000, X, Y) && !ellipse(24232.337646, 10913.582970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24156.786133, 9953.796516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24510.554000, 12695.954000, 1140.992033, 1140.992033, 0.000000, X, Y) && !ellipse(27416.044000, 17393.196600, 1256.424036, 1256.424036, 0.000000, X, Y) && !ellipse(24379.897400, 11327.522000, 1187.856034, 1187.856034, 0.000000, X, Y) && !ellipse(24150.297241, 8479.828461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31405.406403, 21960.369339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24302.111816, 12325.116684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24416.713501, 14310.912659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23717.363600, 15765.182400, 1181.776034, 1181.776034, 0.000000, X, Y) && !ellipse(31545.143250, 20563.010162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20069.369858, 17677.387589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23424.206800, 10408.574000, 705.552020, 705.552020, 0.000000, X, Y) && !ellipse(24765.340200, 15335.280000, 2426.368070, 2426.368070, 0.000000, X, Y) && !ellipse(23797.088074, 12909.750153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31944.101227, 20142.469452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23733.048200, 14418.138000, 860.400025, 860.400025, 0.000000, X, Y) && !ellipse(23865.972809, 13261.299927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24369.626000, 13751.544000, 1838.592053, 407.232812, 90.144300, X, Y) && !ellipse(26261.706635, 16610.549026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.687800, 11968.318000, 839.288024, 839.288024, 0.000000, X, Y) && !ellipse(32788.746000, 20072.640000, 1250.328036, 365.852811, 49.479800, X, Y) && !ellipse(23826.221710, 12482.563904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24685.642000, 15899.136000, 2423.488070, 2423.488070, 0.000000, X, Y) && !ellipse(23861.368988, 14042.856918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22987.010000, 8833.604000, 2115.264061, 2115.264061, 0.000000, X, Y) && !ellipse(21551.072678, 17615.188217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31142.608948, 20045.284760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23785.336914, 11189.082748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32151.028900, 20491.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23537.659851, 9789.484718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32574.960083, 22405.234100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24468.260000, 8244.030000, 1509.264043, 1509.264043, 0.000000, X, Y) && !ellipse(33217.136000, 21234.892800, 1343.432039, 1343.432039, 0.000000, X, Y) && !ellipse(22779.582611, 17428.967117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17495.658200, 21186.070000, 1689.524104, 1689.524104, 0.000000, X, Y) && !ellipse(23562.120636, 7822.903854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18003.998672, 23103.854614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26618.808000, 17480.132000, 730.814421, 730.814421, 0.000000, X, Y) && !ellipse(32028.573639, 19478.364319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33224.398834, 22526.168030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31991.105865, 18979.579895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22960.814000, 16058.788600, 639.865618, 639.865618, 0.000000, X, Y)
[Sat Dec 31 00:18:35 2011] Writing fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src38.gif
[Sat Dec 31 02:04:50 2011] Mean detx,y = (418.32, 15452.42) 
[Sat Dec 31 02:04:54 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 02:10:02 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 02:10:02 2011] Setting source spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Dec 31 02:10:02 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat Dec 31 09:27:27 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:27 2011] Error reading totcts from fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Dec 31 09:27:34 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:34 2011] Using photon index=1.80, rate=0.107, arf fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src38.arf
[Sat Dec 31 09:27:34 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:34 2011] Updating source flux to 4e-12
[Sat Dec 31 09:38:05 2011] Flag p found in src. 38 procflags, skipping spectral fitting
[Sat Dec 31 09:38:05 2011] Flag c found in src. 38 procflags, skipping spectral fitting