[Mon Dec 26 10:37:15 2011] Detection parameters:
  Position = (295.8, 201.1) = 5 34 28.43 21 55 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 648.3 +/- 35.4
  Background counts = 434.6
  Rate = 0.07 +/- 0.004

[Mon Dec 26 10:37:26 2011] Off-axis axis estimate = 7.06'
[Tue Dec 27 03:02:54 2011] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 03:02:54 2011] Initial guess for spatial extent in simple fitting = 9.96"
[Tue Dec 27 03:02:54 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.964
[Tue Dec 27 03:02:54 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 9.96"
[Wed Dec 28 10:32:26 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src14.ximg exists
[Wed Dec 28 10:32:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src14.csv
[Wed Dec 28 10:32:26 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Dec 28 10:32:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src14.csv
[Wed Dec 28 10:32:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:32:29 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Dec 28 10:32:29 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Dec 28 10:32:29 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Dec 28 10:34:32 2011] Warning, spatial fit 14 centroid is now closest to src. 23
[Wed Dec 28 10:34:33 2011] Source 17 is offset by 2.086727 and 7.489137 pixels which is larger than
2 X fitted extent = 2.357310 x 2.357310, not incorporating fit results
[Wed Dec 28 10:34:34 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:34:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:34:34 2011] Assessing source extent using major
[Wed Dec 28 10:34:34 2011] Source does appear to be extended
[Wed Dec 28 10:34:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 05:24:34 2011] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 05:24:34 2011] Initial guess for spatial extent in simple fitting = 9.96"
[Thu Dec 29 05:24:34 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.964
[Thu Dec 29 05:24:34 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 9.96"
[Fri Dec 30 17:13:57 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src12.ximg exists
[Fri Dec 30 17:13:57 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Dec 30 17:13:57 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src12 appears to have run properly
[Fri Dec 30 17:14:00 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Dec 30 17:14:00 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Dec 30 17:14:00 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Dec 30 17:15:15 2011] Warning, spatial fit 12 centroid is now closest to src. 23
[Fri Dec 30 17:15:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:15:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:15:16 2011] Assessing source extent using major
[Fri Dec 30 17:15:16 2011] Source does appear to be extended
[Fri Dec 30 17:15:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 00:18:31 2011] XMMSAS src. selection expression = ellipse(25689.529236, 17448.794876, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 31 00:18:31 2011] Writing source region out to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src17_src.reg
[Sat Dec 31 00:18:31 2011] Extracting stamp from image fullrun_mos2_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (258, 164) - (333, 239)
[Sat Dec 31 00:18:31 2011] XMMSAS bgd. selection expression = annulus(25689.529236, 17448.794876, 1087.500000, 2175.000000, X, Y) && !ellipse(24731.540400, 17435.082000, 567.880816, 567.880816, 0.000000, X, Y) && !ellipse(23982.828613, 17378.274643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24602.846000, 16885.512000, 575.788817, 575.788817, 0.000000, X, Y) && !ellipse(23181.508878, 17451.473980, 1401.968040, 1401.968040, 0.000000, X, Y) && !ellipse(27416.044000, 17393.196600, 1256.424036, 1256.424036, 0.000000, X, Y) && !ellipse(23717.363600, 15765.182400, 1181.776034, 1181.776034, 0.000000, X, Y) && !ellipse(24765.340200, 15335.280000, 2426.368070, 2426.368070, 0.000000, X, Y) && !ellipse(23733.048200, 14418.138000, 860.400025, 860.400025, 0.000000, X, Y) && !ellipse(24369.626000, 13751.544000, 1838.592053, 407.232812, 90.144300, X, Y) && !ellipse(26261.706635, 16610.549026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24685.642000, 15899.136000, 2423.488070, 2423.488070, 0.000000, X, Y) && !ellipse(22779.582611, 17428.967117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26618.808000, 17480.132000, 730.814421, 730.814421, 0.000000, X, Y) && !ellipse(22960.814000, 16058.788600, 639.865618, 639.865618, 0.000000, X, Y)
[Sat Dec 31 00:18:31 2011] Writing fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src17.gif
[Sat Dec 31 00:50:45 2011] Mean detx,y = (1378.42, 6908.12) 
[Sat Dec 31 00:50:47 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 00:51:10 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 00:51:11 2011] Setting source spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Dec 31 00:51:11 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Dec 31 05:10:43 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 31 05:10:43 2011] rmf not generated due to insufficient counts
[Sat Dec 31 09:27:25 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:25 2011] Error reading totcts from fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Dec 31 09:27:32 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:32 2011] Using photon index=1.80, rate=0.0727, arf fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src17.arf
[Sat Dec 31 09:27:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:33 2011] Updating source flux to 1.4e-12
[Sat Dec 31 09:38:05 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting